OBRABOTKAMETALLOV Vol. 23 No. 3 2021 MATERIAL SCIENCE EQUIPMENT. INSTRUMENTS 5 2 3 26. Emel’yanov S.G., Kuts V.V. Matematicheskoe modelirovanie sbornykh fasonnykh frez [Mathematical modeling of prefabricated shaped milling cutters]. Kursk, КurskSTU Publ., 2008. 254 p. ISBN 978-5-7681-0364-4. 27. Isaev A.V., Grechishnikov V.A. Machining curvilinear sections by means of cutting plates with a linear edge. Russian Engineering Research, 2010, vol. 30, no. 4, pp. 413–417. DOI: 10.3103/S1068798X10040222. 28. Emelianov S.G., Chevychelov S.A., Khomutov R.N. Povyshenie effektivnosti chistovoi obrabotki krupnomodul’nykh zubchatykh koles [Improving the finishing efficiency of coarse-grained gear wheels]. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta = Proceedings of the South-West State University, 2019, vol. 23, no. 3, pp. 8–17. DOI: 10.21869/2223-1560-2019-23-3-8-17. 29. Emelyanov S.G., Chevychelov S.A., Chistyakov P.P. Skhemy formoobrazovaniya giperboloidnymi instrumentami [Schemes for formation of hyperboloid instruments]. Izvestiya Tul’skogo gosudarstvennogo universiteta. Tekhnicheskie nauki = News of the Tula State University. Technical Sciences, 2017, no. 8-1, pp. 133–140. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1