OBRABOTKAMETALLOV technology Vol. 25 No. 3 2023 technological process by an end face of a circlewith an elastic suspension grinding head]. Vestnik Permskogo natsional’nogo issledovatel’skogo politekhnicheskogo universiteta. Mashinostroenie, materialovedenie = Bulletin PNRPU. Mechanical engineering, materials science, 2016, vol. 18, no. 4, pp. 34–47. DOI: 10.15593/2224-9877/2016.4.03. 15. Mesaritis M., Shamsa M., Cuervo P., Santa J., ToroA., Marshall M., Lewis R. Alaboratory demonstration of rail grinding and analysis of running roughness and wear. Wear, 2020, vol. 456–457. – DOI: 10.1016/j.wear.2020.203379. 16. Satoh Y., Iwafuchi K. Effect of rail grinding on rolling contact fatigue in railway rail used in conventional line in Japan. Wear, 2008, vol. 265, iss. 9–10, pp. 1342–1348. DOI: 10.1016/j.wear.2008.02.036. 17. Zhou K., Ding H., Zhang S., Guo J., Liu Q., Wang W. Modelling and simulation of the grinding force in rail grinding that considers the swing angle of the grinding stone. Tribology International, 2019, vol. 137, pp. 274–288. DOI: 10.1016/j.triboint.2019.05.012. 18. Zhou К., Ding Н., Wang R., Yang J., Guo J., Liu Q., Wang W. Experimental investigation on material removal mechanism during rail grinding at different forward speeds. Tribology International, 2020, vol. 143, p. 106040. DOI: 10.1016/j.triboint.2019.106040. 19. Uhlmann E., Lypovka P., Hochschild L., Schröer N. Influence of rail grinding process parameters on rail surface roughness and surface layer hardness. Wear, 2016, vol. 366–367, pp. 287–293. DOI: 10.1016/j.wear.2016.03.023. 20. JeongW., Shin J. Grinding effect analysis according to control variables of compact rail surface grindingmachine. Journal of the Korean Society for Railway, 2020, vol. 23, iss. 7, pp. 688–695. – DOI: 10.7782/JKSR.2020.23.7.688. 21. Ilinykh A.S. Design of abrasive tool for high-rate grinding. IOP Conference Series: Earth and Environmental Science, 2016, vol. 53, p. 012024. DOI: 10.1088/1755-1315/53/1/012024. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1