Rationalization of modes of HFC hardening of working surfaces of a plug in the conditions of hybrid processing

OBRABOTKAMETALLOV Vol. 25 No. 3 2023 83 EQUIPMENT. INSTRUMENTS 39. Widłaszewski J., Nowak M., Nowak Z., Kurp P. Curvature change in laser-assisted bending of Inconel 718. Physical Sciences Forum, 2022, vol. 4. iss. 1, p. 26. DOI: 10.3390/psf2022004026. 40. Sun S., Harris J., Brandt M. Parametric investigation of laser-assisted machining of commercially pure titanium. Advances Engineering Materials, 2008, vol 10, iss. 6, pp. 565–572. DOI: 10.1002/adem.200700349. 41. Mohammadi H., Patten J.A. Laser augmented diamond drilling: a new technique to drill hard and brittle materials. Procedia Manufacturing, 2016, vol. 5, pp. 1337–1347. DOI: 10.1016/j.promfg.2016.08.104. 42. Venkatesan K. The study on force, surface integrity, tool life and chip on laser assistedmachining of Inconel 718 using Nd:YAG laser source. Journal of Advanced Research, 2017, vol. 8, iss. 4, pp. 407–423. DOI: 10.1016/j. jare.2017.05.004. 43. Bermingham M.J., Kent D., Dargusch M.S. A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel. Wear, 2015, vol. 328–329, pp. 518–530. DOI: 10.1016/j. wear.2015.03.025. 44. Ul Hasan S., Ali S., Jaff ery S.H.I., Ud Din E., Mubashir A., Khan M. Study of burr width and height using ANOVA in laser hybrid micro milling of titanium alloy (Ti6Al4V). Journal of Materials Research and Technology, 2022, vol. 21, pp. 4398–4408. DOI: 10.1016/j.jmrt.2022.11.051. 45. Ding H., Shen N., Shin Y.C. Thermal and mechanical modeling analysis of laser-assisted micro-milling of diffi cult-to-machine alloys. Journal of Materials Processing Technology, 2012, vol. 212, iss. 3, pp. 601–613. DOI: 10.1016/j.jmatprotec.2011.07.016. 46. Gurabvaiah Punugupati, Kishore Kumar Kandi, Bose P.S.C., Rao C.S.P. Laser assisted machining: a state of art review. IOP Conference Series: Materials Science and Engineering, 2016, vol. 149, p. 012014. DOI: 10.1088/1757899X/149/1/012014. 47. SkeebaV.Yu., IvantsivskyV.V. Gibridnoemetalloobrabatyvayushchee oborudovanie: povyshenie eff ektivnosti tekhnologicheskogo protsessa obrabotki detalei pri integratsii poverkhnostnoi zakalki i abrazivnogo shlifovaniya [Hybrid metal working equipment: improving the eff ectiveness of the details processing under the integration of surface quenching and abrasive grinding]. Novosibirsk, NSTU Publ., 2018. 312 p. ISBN 978-5-77823690-5. 48. Lobanov D.V., Arkhipov P.V., Yanyushkin A.S., Skeeba V.Yu. Research of infl uence electric conditions combined electrodiamond processing by on specifi c consumption of wheel. IOP Conference Series: Materials Science and Engineering, 2016, vol. 142, p. 012081. DOI: 10.1088/1757-899X/142/1/012081. 49. Salonitis K., Chondros T., Chryssolouris G. Grinding wheel eff ect in the grind-hardening process // The International Journal of Advanced Manufacturing Technology, 2008, vol. 38, iss. 1–2, рр. 48–58. DOI: 10.1007/ s00170-007-1078-9. 50. Ding H.T., Shin Y.C. Laser-assisted machining of hardened steel parts with surface integrity analysis. International Journal of Machine Tools and Manufacture, 2010, vol. 50, iss. 1, pp. 106–114. DOI: 10.1016/j. ijmachtools.2009.09.001. 51. Jeon Y., Lee C.M. Current research trend on laser assisted machining. International Journal of Precision Engineering and Manufacturing, 2012, vol. 13, iss. 2, pp. 311–317. DOI: 10.1007/s12541-012-0040-4. 52. Ahn J.W., Woo W.S., Lee C.M. A study on the energy effi ciency of specifi c cutting energy in laser-assisted machining. Applied Thermal Engineering, 2016, vol. 94, pp. 748–753. DOI: 10.1016/j.applthermaleng.2015.10.129. 53. Kim J., Zani L., Abdul-Kadir A., Roy A., Baxevanakis K.P., Jones L.C.R., Silberschmidt V.V. Hybridhybrid turning of micro-SiCp/AA2124 composites: A comparative study of laser-and-ultrasonic vibration-assisted machining. Journal of Manufacturing Processes, 2023, vol. 86, pp. 109–125. DOI: 10.1016/j.jmapro.2022.12.045. 54. Lv B., Lin B., Cao Z., Liu W., Wang G. Numerical simulation and experimental investigation of structured surface generated by 3D vibration-assisted milling. Journal of Manufacturing Processes, 2023, vol. 89, pp. 371–383. DOI: 10.1016/j.jmapro.2023.01.010. 55. Witte J., Huebler D., Schroepfer D., Boerner A., Kannengiesser T. Wear behavior of innovative niobium carbide cutting tools in ultrasonic-assisted fi nishing milling. Wear, 2023, vol. 522, p. 204722. DOI: 10.1016/j. wear.2023.204722. 56. XuM., Wei R., Li C., Ko T.J. High-frequency electrical discharge assisted milling of Inconel 718 under copperberyllium bundle electrodes. Journal of Manufacturing Processes, 2023, vol. 85, pp. 1116–1132. DOI: 10.1016/j. jmapro.2022.12.026. 57. Dumitrescu P., Koshy P., Stenekes J., Elbestawi M.A. High-power diode laser assisted hard turning of AISI D2 tool steel. International Journal of Machine Tools and Manufacture, 2016, vol. 46, iss. 15, pp. 2009–2016. DOI: 10.1016/j.ijmachtools.2006.01.005.

RkJQdWJsaXNoZXIy MTk0ODM1