Structure and properties of HEA-based coating reinforced with CrB particles

OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 25 No. 3 2023 31. Fang S., Wang C., Li C.L., Luan J.H., Jiao Z.B., Liu C.T., Hsueh C.H. Microstructures and mechanical properties of CoCrFeMnNiV high entropy alloy films. Journal of Alloys and Compounds, 2020, vol. 820, pp. 1–8. DOI: 10.1016/j. jallcom.2019.153388. 32. Yim D., Sathiyamoorthi P., Hong S.J., Kim H.S. Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering. Journal of Alloys and Compounds, 2019, vol. 781, pp. 389–396. DOI: 10.1016/j.jallcom.2018.12.119. 33. Shen L., Zhao Y., Li Y., Wu H., Zhu H., Xie Z. Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles. Materials Today Communications, 2021, vol. 26, pp. 1–7. DOI: 10.1016/j. mtcomm.2020.101729. 34. Hussain S.W., MehmoodM.A., KarimM.R.A., GodfreyA.,YaqoobK. Microstructural evolution andmechanical characterization of a WC-reinforced CoCrFeNi HEAmatrix composite. Scientific Reports, 2022, vol. 12, iss. 1, p. 9822. DOI: 10.1038/s41598-022-13649-5. 35. Zhang B., Yu Y., Zhu S., Zhang Z., Tao X., Wang Z., Lu B. Microstructure and wear properties of TiN–Al2O3– Cr2B multiphase ceramics in-situ reinforced CoCrFeMnNi high-entropy alloy coating. Materials Chemistry and Physics, 2022, vol. 276, p. 125352. DOI: 10.1016/j.matchemphys.2021.125352. 36. Mehmood M.A., Mujahid M., Godfrey A., Zafar M.F., Yaqoob K. Development and characterization of boridereinforced CoCrFeNi composites. Journal of Alloys and Compounds, 2023, vol. 947, p. 169535. DOI: 10.1016/j. jallcom.2023.169535. 37. Chen X., Qin G., Gao X., Chen R., Song Q., Cui H. Strengthening CoCrFeNi high-entropy alloy by Laves and boride phases. China Foundry, 2022, vol. 19, iss. 6, pp. 457–463. DOI: 10.1007/s41230-022-1007-4. 38. RuktuevA.A., Lazurenko D.V., Ogneva T.S., Kuzmin R.I., Golkovski M.G., Bataev I.A. Structure and oxidation behavior of CoCrFeNiX (where X is Al, Cu, or Mn) coatings obtained by electron beam cladding in air atmosphere. Surface and Coatings Technology, 2022, vol. 448, p. 128921. DOI: 10.1016/j.surfcoat.2022.128921. Conflicts of Interest The authors declare no conflict of interest.  2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).

RkJQdWJsaXNoZXIy MTk0ODM1