Modeling the interrelation of the cutting force with the cutting depth and the volumes of the metal being removed by single grains in flat grinding

OBRABOTKAMETALLOV Vol. 25 No. 4 2023 21 TECHNOLOGY 24. Voronov S.A., Veidun M. Mathematical modeling of the cylindrical grinding process. Journal of Machinery Manufacture and Reliability, 2017, vol. 46 (4), pp. 394–403. DOI: 10.3103/S1052618817030177. Translated from Problemy mashinostroeniya i nadezhnosti mashin, 2017, no. 4, pp. 85–94. 25. Nosenko S.V., Nosenko V.A., Serdyukov N.D., Kuznetsova A.S. Sostavlyayushchie sily rezaniya ploskogo vreznogo shlifovaniya titanovogo splava vysokostrukturnymi krugami [Components of the cutting force of the fl at plunge grinding of titanium alloy with highly structured wheels]. Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta = Izvestia of Volgograd State Technical University, 2017, no. 5, pp. 36–40. 26. Danilenko M.V. Razrabotka dinamicheskoi matematicheskoi modeli sily rezaniya s uchetom vliyaniya iznosa shlifoval’nogo kruga. Diss. kand. tekhn. nauk [Development of a dynamic mathematical model of the cutting force considering the impact of grinding wheel wear. PhD eng. sci. diss.]. Volgograd, 2018. 175 p. 27. Li J.,Yang R. Zuhe juchuang yu zidonghua jiagong jishu = Modular Machine Tool &AutomaticManufacturing Technique, 2012, no. 6, pp. 92–95. (In Chinese). 28. Liu Y., Zhao H., Jing J., Wei S. Jinganshi yu moliaomoju gongcheng = Diamond and abrasives eng, 2012, vol. 32, no. 4, pp. 55–59. (In Chinese). 29. Kurdyukov V.I. Osnovy abrazivnoi obrabotki [Basics of abrasive processing]. Kurgan, Kurgan State University Publ., 2014. 195 p. ISBN 978-5-4217-0254-2. 30. Pereverzev P.P., Pimenov D.Yu. A grinding force model allowing for dulling of abrasive wheel cutting grains in plunge cylindrical grinding. Journal of Friction and Wear, 2016, vol. 37 (1), pp. 60–65. DOI: 10.3103/ S106836661601013X. Translated from Trenie i iznos, 2016, no. 1 (37), pp. 76–82. 31. Akintseva A.V., Pereverzev P.P. [Analytical model of the cutting force arising in the process of fl at grinding]. Mashinostroitel’nye tekhnologicheskie sistemy [Machine-building technological systems]. Proceedings of the International Scientifi c and Technical Conference (METS 22). Rostov-on-Don, 2022, pp. 232–238. (In Russian). Confl icts of Interest The authors declare no confl ict of interest. © 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).

RkJQdWJsaXNoZXIy MTk0ODM1