OBRABOTKAMETALLOV technology Vol. 25 No. 4 2023 24. Voronov S.A., Veidun M. Mathematical modeling of the cylindrical grinding process. Journal of Machinery Manufacture and Reliability, 2017, vol. 46 (4), pp. 394–403. DOI: 10.3103/S1052618817030177. Translated from Problemy mashinostroeniya i nadezhnosti mashin, 2017, no. 4, pp. 85–94. 25. Nosenko S.V., Nosenko V.A., Serdyukov N.D., Kuznetsova A.S. Sostavlyayushchie sily rezaniya ploskogo vreznogo shlifovaniya titanovogo splava vysokostrukturnymi krugami [Components of the cutting force of the flat plunge grinding of titanium alloy with highly structured wheels]. Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta = Izvestia of Volgograd State Technical University, 2017, no. 5, pp. 36–40. 26. Danilenko M.V. Razrabotka dinamicheskoi matematicheskoi modeli sily rezaniya s uchetom vliyaniya iznosa shlifoval’nogo kruga. Diss. kand. tekhn. nauk [Development of a dynamic mathematical model of the cutting force considering the impact of grinding wheel wear. PhD eng. sci. diss.]. Volgograd, 2018. 175 p. 27. Li J.,Yang R. Zuhe juchuang yu zidonghua jiagong jishu = Modular Machine Tool &AutomaticManufacturing Technique, 2012, no. 6, pp. 92–95. (In Chinese). 28. Liu Y., Zhao H., Jing J., Wei S. Jinganshi yu moliaomoju gongcheng = Diamond and abrasives eng, 2012, vol. 32, no. 4, pp. 55–59. (In Chinese). 29. Kurdyukov V.I. Osnovy abrazivnoi obrabotki [Basics of abrasive processing]. Kurgan, Kurgan State University Publ., 2014. 195 p. ISBN 978-5-4217-0254-2. 30. Pereverzev P.P., Pimenov D.Yu. A grinding force model allowing for dulling of abrasive wheel cutting grains in plunge cylindrical grinding. Journal of Friction and Wear, 2016, vol. 37 (1), pp. 60–65. DOI: 10.3103/ S106836661601013X. Translated from Trenie i iznos, 2016, no. 1 (37), pp. 76–82. 31. Akintseva A.V., Pereverzev P.P. [Analytical model of the cutting force arising in the process of flat grinding]. Mashinostroitel’nye tekhnologicheskie sistemy [Machine-building technological systems]. Proceedings of the International Scientific and Technical Conference (METS 22). Rostov-on-Don, 2022, pp. 232–238. (In Russian). Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1