OBRABOTKAMETALLOV Vol. 25 No. 4 2023 technology References 1. Banhart J. Light-metal foams – History of innovation and technological challenges. Advanced Engineering Materials, 2013, vol. 15 (3), pp. 82–111. DOI: 10.1002/adem.201200217. 2. Sinha N., Srivastava V.C., Sahoo K.L. Processing and application of aluminium foams. Special Metal Casting and Forming Processes (CAFP-2008), Jamshedpur, 2008, pp. 54–63. 3. Banhart J., Baumeister J. Production methods for metallic foams. Materials Research Society Symposium – Proceedings, 1998, vol. 521, pp. 121–132. DOI: 10.1557/proc-521-121. 4. Kulshreshtha A., Dhakad S.K. Preparation of metal foam by different methods: A review. Materials Today: Proceedings, 2020, vol. 26, pt. 2, pp. 1784–1790. DOI: 0.1016/j.matpr.2020.02.375. 5. Singh S., Bhatnagar N. A survey of fabrication and application of metallic foams (1925–2017). Journal of Porous Materials, 2018, vol. 25 (2), pp. 537–554. DOI: 10.1007/s10934-017-0467-1. 6. Karuppasamy R., Barik D. Production methods of aluminium foam: A brief review. Materials Today: Proceedings, 2021, vol. 37, pt. 2, pp. 1584–1587. DOI: 10.1016/j.matpr.2020.07.161. 7. Yuan J.Y., Li Y.X. Effect of orifice geometry on bubble formation in melt gas injection to prepare aluminum foams. Science China Technological Sciences, 2015, vol. 58 (1), pp. 64–74. DOI: 10.1007/s11431-014-5669-z. 8. Wang N., Chen X., Li Y., Liu Z., Zhao Z., Cheng Y., Liu Y., Zhang H. The cell size reduction of aluminum foam with dynamic gas injection based on the improved foamable melt. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2017, vol. 527, pp. 123–131. DOI: 10.1016/j.colsurfa.2017.05.023. 9. Goyal B., Pandey A. Critical review on porous material manufacturing techniques, properties & their applications. Materials Today: Proceedings, 2021, vol. 46, pt. 17, pp. 8196–8203. DOI: 10.1016/j.matpr.2021.03.163. 10. Avinash G., Harika V., Sandeepika C., Kumar R., Gupta N. Porosity control in aluminium foams using different additives. Materials Today: Proceedings, 2019, vol. 18, pp. 1054–1057. DOI: 10.1016/j.matpr.2019.06.563. 11. Jaafar A.H., Al-Ethari H., Farhan K. Modelling and optimization of manufacturing calcium carbonate-based aluminum foam. Materials Research Express, 2019, vol. 6 (8). DOI: 10.1088/2053-1591/ab2602. 12. Ghaleh M.H., Ehsani N., Baharvandi H.R. High-porosity closed-cell aluminum foams produced by melting method without stabilizer particles. International Journal of Metalcasting, 2021, vol. 15 (3), pp. 899–905. DOI: 10.1007/s40962-020-00528-w. 13. Heidari GhalehM., Ehsani N., Baharvandi H.R. Compressive properties ofA356 closed-cell aluminum foamed with a CaCO3 foaming agent without stabilizer particles. Metals and Materials International, 2020, vol. 27 (10), pp. 3856–3861. DOI: 10.1007/s12540-020-00807-5. 14. Karuppasamy R., Barik D., Sivaram N.M., Dennison M.S. Investigation on the effect of aluminium foam made of A413 aluminium alloy through stir casting and infiltration techniques. International Journal of Materials Engineering Innovation, 2020, vol. 11 (1), pp. 34–50. DOI: 10.1504/IJMATEI.2020.104790. 15. Yang C.C., Nakae H. Foaming characteristics control during production of aluminum alloy foam. Journal of Alloys and Compounds, 2000, vol. 313 (1–2), pp. 188–191. DOI: 10.1016/S0925-8388(00)01136-1. 16. Wang N., Maire E., ChengY.,Amani Y., Li Y.,Adrien J., Chen X. Comparison of aluminium foams prepared by different methods using X-ray tomography. Materials Characterization, 2018, vol. 138, pp. 296–307. DOI: 10.1016/j. matchar.2018.02.015. 17. Shapovalov V. Prospective applications of gas-eutectic porous materials (gasars) in USA. Materials Science Forum, 2007, vol. 539–543, pp. 1183–1187. DOI: 10.4028/www.scientific.net/msf.539-543.1183. 18. Liu Y., Li Y., Wan J. Directional solidification of metal-gas eutectic and fabrication of regular porous metals. Frontiers of Mechanical Engineering in China, 2007, vol. 2 (2), pp. 180–183. DOI: 10.1007/s11465-007-0030-x. 19. Banhart J. Manufacturing routes for very low specific. JOM, 2000, vol. 52 (12), pp. 22–27. 20. Güner A., Arıkan M.M., Nebioglu M. New approaches to aluminum integral foam production with casting methods. Metals, 2015, vol. 5 (3), pp. 1553–1565. DOI: 10.3390/met5031553. 21. Gama N., Ferreira A., Barros-Timmons A. 3D printed thermoplastic polyurethane filled with polyurethane foams residues. Journal of Polymers and the Environment, 2020, vol. 28 (5), pp. 1560–1570. DOI: 10.1007/s10924020-01705-y. 22. Wang X.F., Wang X.F., Wei X., Han F.S., Wang X.L. Sound absorption of open celled aluminium foam fabricated by investment casting method. Materials Science and Technology, 2011, vol. 27 (4), pp. 800–804. DOI: 10.1179/026708309X12506934374047. 23. Lichy P., BednarovaV., Elbel T. Casting routes for porous metals production. Archives of Foundry Engineering, 2012, vol. 12 (1), pp. 71–74. DOI: 10.2478/v10266-012-0014-0.
RkJQdWJsaXNoZXIy MTk0ODM1