OBRABOTKAMETALLOV technology Vol. 25 No. 4 2023 24. Kubelka P., Körte F., Heimann J., Xiong X., Jost N. Investigation of a template-based process chain for investment casting of open-cell metal foams. Advanced Engineering Materials, 2022, vol. 24 (1). DOI: 10.1002/ adem.202100608. 25. Fromert J., Lott T.G., Matz A.M., Jost N. Investment casting and mechanical properties of open-cell steel foams. Advanced Engineering Materials, 2019, vol. 21 (6), pp. 1–7. DOI: 10.1002/adem.201900396. 26. Anglani A., Pacella M. Logistic regression and response surface design for statistical modeling of investment casting process in metal foam production. Procedia CIRP, 2018, vol. 67, pp. 504–509. DOI: 10.1016/j. procir.2017.12.252. 27. Kitazono K., Sato E., Kuribayashi K. Novel manufacturing process of closed-cell aluminum foam by accumulative roll-bonding. Scripta Materialia, 2004, vol. 50 (4), pp. 495–498. DOI: 10.1016/j.scriptamat.2003.10.035. 28. Asavavisithchai S., KennedyA.R. The effect of Mg addition on the stability ofAl-Al2O3 foams made by a powder metallurgy route. Scripta Materialia, 2006, vol. 54 (7), pp. 1331–1334. DOI: 10.1016/j.scriptamat.2005.12.015. 29. Cambronero L.E.G., Ruiz-Roman J.M., Corpas F.A., Ruiz Prieto J.M. Manufacturing of Al-Mg-Si alloy foam using calcium carbonate as foaming agent. Journal of Materials Processing Technology, 2009, vol. 209 (4), pp. 1803–1809. DOI: 10.1016/j.jmatprotec.2008.04.032. 30. Koizumi T., Kido K., Kita K., Mikado K., Gnyloskurenko S., Nakamura T. Foaming agents for powder metallurgy production of aluminum foam. Materials Transactions, 2011, vol. 52 (4), pp. 728–733. DOI: 10.2320/ matertrans.M2010401. 31. Yang D., Guo S., Chen J., Qiu C., Agbedor S.-O., Ma A., Jiang J., Wang L. Preparation principle and compression properties of cellular Mg–Al–Zn alloy foams fabricated by the gas release reaction powder metallurgy approach. Journal of Alloys and Compounds, 2021, vol. 857, p. 158112. DOI: 10.1016/j.jallcom.2020.158112. 32. Shiomi M., Imagama S., Osakada K., Matsumoto R. Fabrication of aluminium foams from powder by hot extrusion and foaming. Journal of Materials Processing Technology, 2010, vol. 210 (9), pp. 1203–1208. DOI: 10.1016/j. jmatprotec.2010.03.006. 33. Yu C.J. Metal foaming by a powder metallurgy method: Production, properties and applications. Materials Research Innovations, 1998, vol. 2 (3), pp. 181–188. DOI: 10.1007/s100190050082. 34. Kennedy A. Porous metals and metal foams made from powders. Powder Metallurgy. Ed. by K. Kondoh. InTech, 2012. DOI: 10.5772/33060. 35. Surace R., Filippis L.A.C. de, LudovicoA.D., Boghetich G. Influence of processing parameters on aluminium foam produced by space holder technique. Materials and Design, 2009, vol. 30 (6), pp. 1878–1885. DOI: 10.1016/j. matdes.2008.09.027. 36. Rodriguez-Contreras A., Punset M., Calero J.A., Gil F.J., Ruperez E., Manero J.M. Powder metallurgy with space holder for porous titanium implants: A review. Journal of Materials Science and Technology, 2021, vol. 76, pp. 129–149. DOI: 10.1016/j.jmst.2020.11.005. 37. Jha N., Mondal D.P., Dutta Majumdar J., Badkul A., Jha A.K., Khare A.K. Highly porous open cell Tifoam using NaCl as temporary space holder through powder metallurgy route. Materials and Design, 2013, vol. 47, pp. 810–819. DOI: 10.1016/j.matdes.2013.01.005. 38. Sazegaran H., Feizi A., Hojati M. Effect of Cr contents on the porosity percentage, microstructure, and mechanical properties of steel foams manufactured by powder metallurgy. Transactions of the Indian Institute of Metals, 2019, vol. 72 (10), pp. 2819–2826. DOI: 10.1007/s12666-019-01758-1. 39. Parveez B., Jamal N.A., Anuar H., Ahmad Y., Aabid A., Baig M. Microstructure and mechanical properties of metal foams fabricated via melt foaming and powder metallurgy technique: A review. Materials, 2022, vol. 15. DOI: 10.3390/ma15155302. 40. Jamal N.A., Maizatul O., Anuar H., Yusof F., Ahmad Nor Y., Khalid K., Zakaria M.N. Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik, 2018, vol. 49 (4), pp. 460–466. DOI: 10.1002/mawe.201700269. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1