OBRABOTKAMETALLOV technology Vol. 25 No. 4 2023 9. Lopes J.G., Machado C.M., Duarte V.R., Rodrigues T.A., Santos T.G., Oliveira J.P. Effect of milling parameters on HSLA steel parts produced by Wire and Arc Additive Manufacturing (WAAM). Journal of Manufacturing Processes, 2020, vol. 59, pp. 739–749. DOI: 10.1016/j.jmapro.2020.10.007. 10. Dang J., Zhang H., Ming W., An Q., Chen M. New observations on wear characteristics of solid Al2O3/Si3N4 ceramic tool in high speed milling of additive manufactured Ti6Al4V. Ceramics International, 2020, vol. 46 (5), pp. 5876–5886. DOI: 10.1016/j.ceramint.2019.11.039. 11. Bordin A., Bruschi S., Ghiotti A., Bariani P.F. Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy. Wear, 2015, vol. 328–329, pp. 89–99. DOI: 10.1016/j.wear.2015.01.030. 12. Milton S., MorandeauA., Chalon F., Leroy R. Influence of finish machining on the surface integrity of Ti6Al4V produced by selective laser melting. Procedia CIRP, 2016, vol. 45, pp. 127–130. DOI: 10.1016/j.procir.2016.02.340. 13. Keist J.S., Palmer T.A. Development of strength-hardness relationships in additively manufactured titanium alloys. Materials Science and Engineering: A, 2017, vol. 693, pp. 214–224. DOI: 10.1016/j.msea.2017.03.102. 14. Tascioglu E., Kaynak Yu., Poyraz Ö., Orhangül A., Ören S. The effect of finish-milling operation on surface quality and wear resistance of Inconel 625 produced by selective laser melting additive manufacturing. Advanced Surface Enhancement. INCASE 2019. Springer, 2020, pp. 263–272. DOI: 10.1007/978-981-15-0054-1_27. 15. Montevecchi F., Grossi N., Takagi H., Scippa A., Sasahara H., Campatelli G. Cutting forces analysis in additive manufactured AISI H13 alloy. Procedia CIRP, 2016, vol. 46, pp. 476–479. 16. Hojati F., Daneshi A., Soltani B., Azarhoushang B., Biermann D. Study on machinability of additively manufactured and conventional titanium alloys in micro-milling process. Precision Engineering, 2020, vol. 62, pp. 1–9. DOI: 10.1016/j.precisioneng.2019.11.002. 17. Gong Y., Li P. Analysis of tool wear performance and surface quality in post milling of additive manufactured 316L stainless steel. Journal of Mechanical Science and Technology, 2019, vol. 33, pp. 2387–2395. DOI: 10.1007/ s12206-019-0237-x. 18. Ni Ch., Zhu L., Yang Zh. Comparative investigation of tool wear mechanism and corresponding machined surface characterization in feed-direction ultrasonic vibration assisted milling of Ti–6Al–4V from dynamic view. Wear, 2019, vol. 436, p. 203006. DOI: 10.1016/j.wear.2019.203006. 19. Xiong X., Haiou Z., Guilan W. A new method of direct metal prototyping: hybrid plasma deposition and milling. Rapid Prototyping Journal, 2008, vol. 14 (1), pp. 53–56. DOI: 10.1108/13552540810841562. 20. Ahmetshin R., Fedorov V., Kostikov K., Martyushev N., Ovchinnikov V., Rasin A., Yakovlev A. SLS setup and its working procedure. Key Engineering Materials, 2016, vol. 685, pp. 477–481. DOI: 10.4028/www.scientific. net/KEM.685.477. 21. Martyushev N., Petrenko Yu. Effects of crystallization conditions on lead tin bronze properties. Advanced Materials Research, 2014, vol. 880, pp. 174–178. DOI: 10.4028/www.scientific.net/AMR.880.174. 22. Isametova M.E., Martyushev N.V., Karlina Y.I., Kononenko R.V., Skeeba V.Yu., Absadykov B.N. Thermal pulse processing of blanks of small-sized parts made of beryllium bronze and 29 NK alloy. Materials, 2022, vol. 15, p. 6682. DOI: 10.3390/ma15196682. 23. Martyushev N.V., Bublik D.A., Kukartsev V.V., Tynchenko V.S., Klyuev R.V., Tynchenko Y.A., Karlina Y.I. Provision of rational parameters for the turning mode of small-sized parts made of the 29 NK alloy and beryllium bronze for subsequent thermal pulse deburring. Materials, 2023, vol. 16, p. 3490. DOI: 10.3390/ma16093490. 24. Cahoon B.W.H., Broughton W.H., Kutzak A.R. The determination of yield strength from hardness measurements. Metallurgical Transactions, 1971, vol. 2 (7), pp. 1979–1983. DOI: 10.1007/bf02913433. 25. Abootorabi Zarchi M.M., Razfar M.R., Abdullah A. Influence of ultrasonic vibrations on side milling of AISI 420 stainless steel. The International Journal of Advanced Manufacturing Technology, 2013, vol. 66, pp. 83– 89. DOI: 10.1007/s00170-012-4307-9. 26. Lou X., Andresen P.L., Rebak R.B. Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior. Journal of Nuclear Materials, 2018, vol. 499, pp. 182–190. DOI: 10.1016/j.jnucmat.2017.11.036. 27. Chen X., Li J., Cheng X., Wang H., Huang Z. Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing. Materials Science and Engineering: A, 2018, vol. 715, pp. 307–314. DOI: 10.1016/j.msea.2017.10.002. 28. Martyushev N.V., Kozlov V.N., Qi M., Tynchenko V.S., Kononenko R.V., Konyukhov V.Y., Valuev D.V. Production of workpieces from martensitic stainless steel using electron-beam surfacing and investigation of cutting forces when milling workpieces. Materials, 2023, vol. 16, p. 4529. DOI: 10.3390/ma16134529.
RkJQdWJsaXNoZXIy MTk0ODM1