Effect of tool pin profile on the tensile characteristics of friction stir welded joints of AA8011

OBRABOTKAMETALLOV Vol. 23 No. 3 2021 MATERIAL SCIENCE EQUIPMENT. INSTRUMENTS 5 4 3 5. Jata K.V., Semiatin S.L. Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys. Scripta Materialia, 2000, vol. 43 (8), pp. 743–749. 6. Benavides S., Li Y., Murr L.E., Brown D., McClure J.C. Low-temperature friction-stir welding of 2024 aluminum. Scripta Materialia, 1999, vol. 41 (8), pp. 809–815. 7. Rajak D.K., Pagar D.D., Menezes P.L., Eyvazian A. Friction-based welding processes: friction welding and friction stir welding. Journal of Adhesion Science and Technology, 2020, vol. 34 (24), pp. 2613–2637. DOI: 10.108 0/01694243.2020.1780716. 8. Acerra F., Buffa G., Fratini l., Troiano G. On the FSW of AA2024-T4 and AA7075-T6 T-joints: an industrial case study. The International Journal of Advanced Manufacturing Technology, 2010, vol. 48, pp. 1149–1157. DOI: 10.1007/s00170-009-2344-9. 9. Cavaliere P., Cerri E., Squillace A. Mechanical response of 2024-7075 aluminium alloys joined by friction stir welding. Journal of Materials Science, 2005, vol. 40, pp. 3669–3676. DOI: 10.1007/s10853-005-0474-5. 10. Rajpoot Y.S., Narayanan R.G., Das S. Predicting the effect of tool configuration during friction stir welding by cellular automata finite element analyses. International Journal of Manufacturing Research, 2018, vol. 13 (4), pp. 359–381. DOI: 10.1504/IJMR.2018.095377. 11. Song Z., Nakata K., Wu A., Liao J., Zhou L. Influence of probe offset distance on interfacial microstructure and mechanical properties of friction stir butt welded joint of Ti6Al4V and A6061 dissimilar alloys. Materials & Design, 2014, vol. 57, pp. 269–278. DOI: 10.1016/j.matdes.2013.12.040. 12. Shah L.H., Guo S., Walbridge S., Gerlich A. Effect of tool eccentricity on the properties of friction stir welded AA6061 aluminum alloys. Manufacturing Letters, 2018, vol. 15, pt.A, pp. 14–17. DOI: 10.1016/j.mfglet.2017.12.019. 13. Hussain A.K., Quadri S.A.P. Evaluation of parameters of friction stir welding for aluminium AA6351 alloy. International Journal of Engineering Science and Technology, 2010, vol. 2 (10), pp. 5977–5984. 14. Rajpoot Y.S., Saxena K., Deepak D. A review on the influence of tool pin profile on microstructure and mechanical properties of friction stir welded joints. Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2022. Singapore, Springer, 2022, pp. 119–149. DOI: 10.1007/978-981-19-4208-2_10. 15. Cam G., Mistikoglu S. Recent developments in friction stir welding of Al-alloys. Journal of Materials Engineering and Performance, 2014, vol. 23, pp. 1936–1953. DOI: 10.1007/s11665-014-0968-x. 16. Mikhail J., IbrahimR., Lathabai S. Effect of tool design on the microstructure and microhardness of friction stir processed 5005-H34 aluminium alloy. Proceedings of SPIE, 2013, vol. 8793, pp. 334–340. DOI: 10.1117/12.2026587. 17. Venkata Rao Ch., Madhusudhan Reddy G., Srinivasa Rao K. Influence of tool pin profile on microstructure and corrosion behaviour of AA2219 Al–Cu alloy friction stir weld nuggets. Defence Technology, 2015, vol. 11 (3), pp. 197–208. DOI: 10.1016/j.dt.2015.04.004. 18. Leitao C., Emílio B., Chaparro B.M., Rodrigues D.M. Formability of similar and dissimilar friction stir welded AA 5182-H111 and AA 6016-T4 tailored blanks. Materials & Design, 2009, vol. 30 (8), pp. 3235–3242. DOI: 10.1016/j.matdes.2008.12.005. 19. Cole E.G., Fehrenbacher A., Duffie N.A., Zinn M.R., Pfefferkorn F.E., Ferrier N.J. Weld temperature effects during friction stir welding of dissimilar aluminum alloys 6061-t6 and 7075-t6. The International Journal of Advanced Manufacturing Technology, 2014, vol. 71, pp. 643–652. DOI: 10.1007/s00170-013-5485-9. 20. Sharma N., Khan Z.A., SiddiqueeA.N. Friction stir welding of aluminum to copper – an overview. Transactions of Nonferrous Metals Society of China, 2017, vol. 27 (10), pp. 2113–2136. DOI: 10.1016/S1003-6326(17)60238-3. 21. Moreira P.M.G.P., Santos t., Tavares S.M.O., Richter-Trummer V., Vilaça P., de Castro P.M.S.T. Mechanical and metallurgical characterization of friction stir welding joints ofAA6061-T6 withAA6082-T6. Materials &Design, 2009, vol. 30 (1), pp. 180–187. DOI: 10.1016/j.matdes.2008.04.042. 22. Ge Z., Gao S., Ji S., Yan D. Effect of pin length and welding speed on lap joint quality of friction stir welded dissimilar aluminum alloys. The International Journal of Advanced Manufacturing Technology, 2018, vol. 98, pp. 1461–1469. DOI: 10.1007/s00170-018-2329-7. 23. Buffa G., Campanile G., Fratini L., PriscoA. Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties. Materials Science and Engineering: A, 2009, vol. 519 (1–2), pp. 19– 26. DOI: 10.1016/j.msea.2009.04.046. 24. Davidson B.S., Neelakrishnan S. Influence of friction stir welding parameters on tensile properties of AA8011 aluminium alloy plate. Journal of Computational and Theoretical Nanoscience, 2018, vol. 15 (1), pp. 93– 98. DOI: 10.1166/jctn.2018.7060. 25. Palani K., Elanchezhian C., Vijaya Ramnath B., Bhaskar G.B., Naveen E. Effect of pin profile and rotational speed on microstructure and tensile strength of dissimilar AA8011, AA01-T6 friction stir welded aluminum alloys. Materials Today: Proceedings, 2018, vol. 5 (11), pp. 24515–24524. DOI: 10.1016/j.matpr.2018.10.248.

RkJQdWJsaXNoZXIy MTk0ODM1