OBRABOTKAMETALLOV MATERIAL SCIENCE Том 23 № 3 2021 EQUIPMEN . INSTRUM TS Vol. 5 No. 4 2023 26. Elangovan K., Balasubramanian V. Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy. Materials Science and Engineering: A, 2007, vol. 459 (1–2), pp. 7–18. DOI: 10.1016/j.msea.2006.12.124. 27. Elangovan K., Balasubramanian V. Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy. Journal of Materials Processing Technology, 2008, vol. 200 (1–3), pp. 163–175. DOI: 10.1016/j.jmatprotec.2007.09.019. 28. Elangovan K., Balasubramanian V. Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy. Materials & Design, 2008, vol. 29 (2), pp. 362–373. DOI: 10.1016/j.matdes.2007.01.030. 29. Chandana R., Saraswathamma K. Impact of tool pin profiles in friction stir welding process – A review. Materials Today: Proceedings, 2023, vol. 76, pt. 3, pp. 602–606. DOI: 10.1016/j.matpr.2022.12.097. 30. Shimpi R., Kumar C.S., Katarane R., Shukla A.K. Investigation on effects of variation of tool pin profile in a Friction stir welding process by finite element approach for joining dissimilar materials. Materials Today: Proceedings, 2022, vol. 66, pt. 3, pp. 1361–1364. DOI: 10.1016/j.matpr.2022.05.154. 31. Di Bella C., Alderucci T., Favaloro F., Borsellino C. Effect of tool tilt angle on mechanical resistance of AA6082/AA5083 friction stir welded joints for marine applications. Procedia CIRP, 2023, vol. 118, pp. 879–884. DOI: 10.1016/j.procir.2023.06.151. 32. Balamurugan S., Jayakumar K., Anbarasan B., Rajesh M. Effect of tool pin shapes on microstructure and mechanical behaviour of friction stir welding of dissimilar aluminium alloys. Materials Today: Proceedings, 2023, vol. 72, pt. 4, pp. 2181–2185. DOI: 10.1016/j.matpr.2022.08.459. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1