OBRABOTKAMETALLOV MATERIAL SCIENCE Том 23 № 3 2021 EQUIPMEN . INSTRUM TS Vol. 5 No. 4 2023 2. Rao V.D.P., Ali S.R.M., Ali S.M.S., Geethika V.N. Multi-objective optimization of cutting parameters in CNC turning of stainless steel 304 with TiAlN nano coated tool. Materials Today: Proceedings, 2018, vol. 5 (12), pp. 25789–25797. DOI: 10.1016/j.matpr.2018.06.571. 3. Kulkarni A., Sargade V., More C. Machinability investigation of AISI 304 austenitic stainless steels using multilayer AlTiN/TiAlN coated carbide inserts. Procedia Manufacturing, 2018, vol. 20, pp. 548–553. DOI: 10.1016/j. promfg.2018.02.082. 4. Bouzid L., Berkani S., Yallese M., Girardin F., Mabrouki T. Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach. International Journal of Industrial Engineering Computations, 2018, vol. 9 (3), pp. 349–368. DOI: 10.5267/j.ijiec.2017.8.002. 5. Sharma N., Gupta K. Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Materials Research Express, 2019, vol. 6 (8), p. 086585. DOI: 10.1088/20531591/ab1e59. 6. Patel U.S., Rawal S.K., Arif A.F.M., Veldhuis S.C. Influence of secondary carbides on microstructure, wear mechanism, and tool performance for different cermet grades during high-speed dry finish turning of AISI 304 stainless steel. Wear, 2020, vol. 452, p. 203285. DOI: 10.1016/j.wear.2020.203285. 7. Dubovska R., Majerik J., Chochlikova H. Investigation of durability T = f (vc) in turning of the AISI 304 austenitic stainless steel using the CNMG 120408 coated carbide insert. Advanced Materials Research, 2014, vol. 941, pp. 1633–1643. DOI: 10.4028/www.scientific.net/AMR.941-944.1633. 8. Sharma A.K., Tiwari A.K., Dixit A.R., Singh R.K. Measurement of machining forces and surface roughness in turning of AISI 304 steel using alumina-MWCNT hybrid nanoparticles enriched cutting fluid. Measurement, 2020, vol. 150, p. 107078. DOI: 10.1016/j.measurement.2019.107078. 9. Rao V.D.P., Harsha N., RamN.R., Geethika V.N. Optimization of cutting parameters in CNC turning of stainless steel 304 with TiAlN nano coated carbide cutting tool. IOP Conference Series: Materials Science and Engineering, 2018, vol. 310 (1), p. 012109. DOI: 10.1088/1757-899X/310/1/012109. 10. Chen K.T., Hu C.C., Hsu C.Y., Tsao C.C., Hong P.D. Optimizing the multiattribute characteristics of CrWN hard film tool in turning AISI 304 stainless steel. Journal of Materials Engineering and Performance, 2020, vol. 29, pp. 2506–2513. DOI: 10.1007/s11665-020-04732-x. 11. Patil N., Gopalakrishna K., Sangmesh B., Sudhakar K., Vijaykumar G.C. Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel. Journal of Mechanical Engineering and Sciences, 2018, vol. 12 (3), pp. 3927–3941. DOI: 10.15282/jmes.12.3.2018.12.0343. 12. Singh T., Dureja J.S., Dogra M., Bhatti M.S. Multi-response optimization in environment friendly turning of AISI 304 austenitic stainless steel. Multidiscipline Modeling in Materials and Structures, 2019, vol. 15 (3), pp. 538– 558. DOI: 10.1108/MMMS-07-2018-0139. 13. Lubis S., Rosehan, Darmawan S., Adianto, Malik R. The influence of cutting speed variation in turning of AISI 304 materials on wear and tool life coated carbide cutting tools. International Journal of Mechanical Engineering and Technology, 2019, vol. 10 (6), pp. 203–210. 14. Khan S.A., Shamail S., Anwar S., Hussain A., Ahmad S., Saleh M. Wear performance of surface treated drills in high-speed drilling of AISI 304 stainless steel. Journal of Manufacturing Processes, 2020, vol. 58, pp. 223–235. DOI: 10.1016/j.jmapro.2020.08.022. 15. Bedi S.S., Behera G.C., Datta S. Effects of cutting speed on MQL machining performance of AISI 304 stainless steel using uncoated carbide insert: application potential of coconut oil and rice bran oil as cutting fluids. Arabian Journal for Science and Engineering, 2020, vol. 45, pp. 8877–8893. DOI: 10.1007/s13369-020-04554-y. 16. Rathod N.J., Chopra M.K., Chaurasiya P.K., Vidhate U.S., Dasore A. Optimization on the turning process parameters of SS 304 usingTaguchi andTOPSIS. Annals of Data Science, 2023, vol. 10, pp. 1405–1419. DOI: 10.1007/ s40745-021-00369-2. 17. Sivaiah P., Revantha Kumar M., Bala Subramanyam S., Prasad K.L.V. A comparative study on different textured and untextured tools performance in turning process. Materials and Manufacturing Processes, 2021, vol. 36 (8), pp. 926–935. DOI: 10.1080/10426914.2020.1866201. 18. Moganapriya C., Rajasekar R., Santhosh R., Saran S., Santhosh S., Gobinath V.K., Kumar P.S. Sustainable hard machining of AISI 304 stainless steel through TiAlN, AlTiN, and TiAlSiN coating and multi-criteria decision making using grey fuzzy coupled Taguchi method. Journal of Materials Engineering and Performance, 2022, vol. 31 (9), pp. 7302–7314. DOI: 10.1007/s11665-022-06751-2. 19. Bedi S.S., Sahoo S.P., Vikas B., Datta S. Influence of cutting speed on dry machinability of AISI 304 stainless steel. Materials Today: Proceedings, 2021, vol. 38, pp. 2174–2180. DOI: 10.1016/j.matpr.2020.05.554.
RkJQdWJsaXNoZXIy MTk0ODM1