Ultrasonic vibration-assisted hard turning of AISI 52100 steel: comparative evaluation and modeling using dimensional analysis

OBRABOTKAMETALLOV Vol. 25 No. 4 2023 150 EQUIPMENT. INSTRUMENTS 2. Babitsky V.I., Mitrofanov A.V., Silberschmidt V.V. Ultrasonically assisted turning of aviation materials: simulations and experimental study. Ultrasonics, 2004, vol. 42, pp. 81–86. DOI: 10.1016/j.ultras.2004.02.001. 3. Vivekananda K., Arka G.N., Sahoo S.K. Design and analysis of ultrasonic vibratory tool (UVT) using FEM, and experimental study on ultrasonic vibration-assisted turning (UAT). Procedia Engineering, 2014, vol. 97, pp. 1178– 1186. DOI: 10.1016/j.proeng.2014.12.396. 4. Liu Y., Li J., Zhang L. Eff ects of ultrasonic vibration on cutting forces and machined surface quality in turning of AISI 1045 steel. International Journal of Advanced Manufacturing Technology, 2019, vol. 101, pp. 1137–1147. DOI: 10.1038/s41598-022-21236-x. 5. Muhammad R., Maurotto A., Roy A., Silberschmidt V.V. Analysis of forces in vibro-impact and hot vibroimpact turning of advanced alloys. Applied Mechanics and Materials, 2011, vol. 70, pp. 315–320. DOI: 10.4028/ www.scientifi c.net/AMM.70.315. 6. Lotfi M., Amini S., Akbari J. Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti–6Al–4V: FEM and experimental examination. Tribology International, 2020, vol. 151, p. 106492. DOI: 10.1016/j.triboint.2020.106492. 7. Celaya A., Luis N.N.L., Francisco J.C., Lamikiz A. Ultrasonic Assisted Turning of mild steels. International Journal of Materials and Product Technology, 2010, vol. 37. DOI: 10.1504/IJMPT.2010.029459. 8. Jiao F., Liu X., Zhao C., Zhang X. Experimental study on the surface micro-geometrical characteristics of quenched steel in Ultrasonic Assisted Turning. Advanced Materials Research, 2011, vol. 189–193, pp. 4059–4063. DOI: 10.4028/www.scientifi c.net/AMR.189-193.4059. 9. MaurottoA., Muhammad R., RoyA., Babitsky V.I., Silberschmidt V.V. Comparing machinability of Ti-15-3-33 and Ni-625 alloys in UAT. Procedia CIRP, 2012, vol. 1, pp. 330–335. DOI: 10.1016/j.procir.2012.04.059. 10. Zou P., Xu Y., He Y., Chen M., Wu H. Experimental investigation of ultrasonic vibration assisted turning of 304 austenitic stainless steel. Shock and Vibration, 2015, art. 817598. DOI: 10.1155/2015/817598. 11. Kumar J., Khamba J.S. Modelling the material removal rate in ultrasonic machining of titanium using dimensional analysis. International Journal of Advanced Manufacturing Technology, 2010, vol. 48, pp. 103–119. DOI: 10.1007/s00170-009-2287-1. 12. Kugaevskii S.S., Ashikhmin V.N. Using local coordinate systems for dimensional analysis in the machining. Proceedings of the 4th International Conference on Industrial Engineering. ISIE 2018. Springer, 2018, pp. 301–309. DOI: 10.1007/978-3-319-95630-5_33. 13. Skelton R.C. Turning with an oscillating tool. International Journal of Machine Tool Design and Research, 1968, vol. 8, pp. 239–259. DOI: 10.1016/0020-7357(68)90014-0. 14. MitrofanovA.V., BabitskyV.I., SilberschmidtV.V. Thermomechanical fi nite element simulations of ultrasonically assisted turning. Computational Materials Science, 2005, vol. 32, pp. 463–471. DOI: 10.1016/j.commatsci.2004.09.019. 15. Ghule G.S., Sanap S. Ultrasonic vibrations assisted turning (UAT): A review. Advances in Engineering Design: Select proceedings of FLAME 2020. Springer, 2021, pp. 275–285. DOI: 10.1007/978-981-33-4684-0_28. 16. Nath C., Rahman M., Andrew S.S.K. A study on ultrasonic vibration cutting of low alloy steel. Journal of Materials Processing Technology, 2007, pp. 159–165. DOI: 10.1016/j.jmatprotec.2007.04.047. 17. Ghule G.S., Sanap S., Adsul S., Chinchanikar S., Gadge M. Experimental investigations on the ultrasonic vibration-assisted hard turning of AISI 52100 steel using coated carbide tool. Materials Today: Proceedings, 2022, vol. 68 (6), pp. 2093–2098. DOI: 10.1016/j.matpr.2022.08.368. 18. Zhang G., SunY., Xu L., Wang L., Zuo D. Prediction of erosion volume of PDMS by cryogenic micro-abrasive jet machining based on dimensional analysis method and experimental verifi cation. The International Journal of Advanced Manufacturing Technology, 2021, vol. 114, pp. 2447–2455. DOI: 10.1007/s00170-021-07020-7. 19. Singh N.K., Sign Y. Experimental investigation and modelling of surface fi nish in argon-assisted electrical discharge machining using dimensional analysis. Arabian Journal for Science and Engineering, 2019, vol. 44, pp. 5839–5850. DOI: 10.1007/s13369-01 9-03738-5. 20. Airao J., Khanna N., Roy A., Hegab H. Comprehensive experimental analysis and sustainability assessment of machining Nimonic 90 using ultrasonic-assisted turning facility. The International Journal of Advanced Manufacturing Technology, 2020, vol. 109, pp. 1447–1462. DOI: 10.1007/s00170-020-05686-z. Confl icts of Interest The authors declare no confl ict of interest. © 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).

RkJQdWJsaXNoZXIy MTk0ODM1