OBRABOTKAMETALLOV Vol. 25 No. 4 2023 213 MATERIAL SCIENCE In situ crystal lattice analysis of nitride single-component and multilayer ZrN/CrN coatings in the process of thermal cycling Andrey Vorontsov 1, a, Andrey Filippov 1, b,*, Nikolay Shamarin 1, c, Evgeny Moskvichev 1, d, Olga Novitskaya 1, e, Evgeny Knyazhev 1, f, Yulia Denisova 2, g, Andrey Leonov 2, h, Vladimir Denisov 2, i 1 Institute of Strenght Physics and Materials Sciences SB RAS, 2/4 per. Academicheskii, Tomsk, 634055, Russian Federation 2 Institute of High Current Electronics SB RAS, 2/3 per. Academicheskii, Tomsk, 634055, Russian Federation a https://orcid.org/0000-0002-4334-7616, vav@ispms.ru; b https://orcid.org/0000-0003-0487-8382, andrey.v.fi lippov@yandex.ru; c https://orcid.org/0000-0002-4649-6465, shnn@ispms.ru; d https://orcid.org/0000-0002-9139-0846, em_tsu@mail.ru; e https://orcid.org/0000-0003-1043-4489, nos@ispms.tsc.ru; f https://orcid.org/0000-0002-1984-9720, zhenya4825@gmail.com; g https://orcid.org/0000-0002-3069-1434, yukolubaeva@mail.ru; h https://orcid.org/0000-0001-6645-3879, laa-91@yandex.ru; i https://orcid.org/0000-0002-5446-2337, volodyadenisov@yandex.ru Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2023 vol. 25 no. 4 pp. 202–215 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2023-25.4-202-215 ART I CLE I NFO Article history: Received: 20 September 2023 Revised: 26 September 2023 Accepted: 11 October 2023 Available online: 15 December 2023 Keywords: Coating Nitrides Phase composition RSA CTE Stresses Funding The work was carried out with the fi nancial support of the Russian Federation represented by the Ministry of Science and Higher Education (project No. 075-15-2021-1348) within the framework of event No. 1.1.16. Acknowledgements Research were partially conducted at core facility “Structure, mechanical and physical properties of materials”. ABSTRACT Introduction. Thermal expansion is an important thermal and physical characteristic of materials, showing its expansion when heated. Knowing this property is important both from a scientifi c point of view and for practical applications. Materials with low thermal expansion are widely used in electronics, thermal barrier coatings and other applications. Mismatch in thermal expansion between diff erent materials can lead to thermal stress on contact surfaces. The in-situ synchrotron X-ray diff raction method can detect this mismatch. Thermal stress requires an analysis of the coeffi cient of thermal expansion. Bulk expansion behavior is observed in thermally sprayed coatings. The CTE is important for designing and predicting coating performance under thermal stresses. Changes in the KTE can cause cracking and degradation of the coating. In-situ X-ray diff raction analysis helps to understand thermal expansion, crystallite size and stress and strain variation with temperature change. The aim of this work is to interpret and use in-situ high temperature X-ray diff raction as an eff ective tool to study the thermal mismatch behavior of a W-Co alloy substrate (8 % w/w Co, WC – matrix) with CrN, ZrN and CrZrN multilayer coatings and the characteristic diff erences between single component coatings and its combination in a multilayer coating. Research Methodology. In this work, specimens of chromium and zirconium nitride coatings deposited on W-Co hard alloy substrates were investigated. The fundamental method in this work is in-situ analysis using synchrotron radiation. The lattice parameter as a function of cycling temperature, the coeffi cient of thermal expansion during heating and cooling, and the thermal expansion mismatch between the substrate-coating pair and the coating layers in the multilayer coating were evaluated. Results and discussion. The lattice parameters and thermal expansion of the coatings are investigated. The lattice parameter of all coatings decreased during thermal cycling, indicating nitrogen evaporation. The multilayer coating has the least change in the parameter, possibly due to diff usion barriers. Lattice distortions do not diff er between single and multilayer coatings. All coatings exhibit thermal expansion similar to the substrate. The multilayer coating creates conditions for compressive stresses in one phase and tensile stresses in the other phase, so the lifetime of multilayer coatings is expected to be high. For citation: VorontsovA.V., FilippovA.V., Shamarin N.N., Moskvichev E.N., Novitskaya O.S., Knyazhev E.O., DenisovaYu.A., LeonovA.A., Denisov V.V. In situ crystal lattice analysis of nitride single-component and multilayer ZrN/CrN coatings in the process of thermal cycling. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2023, vol. 25, no. 4, pp. 202–215. DOI: 10.17212/1994-6309-2023-25.4-202-215. (In Russian). ______ * Corresponding author Vorontsov Andrey V., Ph.D. (Engineering), Junior researcher Institute of Strenght Physics and Materials Sciences SB RAS, 2/4 per. Academicheskii, 634055, Tomsk, Russian Federation Tel.: +7 (983) 239-34-17, e-mail: vav@ispms.ru
RkJQdWJsaXNoZXIy MTk0ODM1