OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 25 No. 4 2023 7. Patel P., Nakum B., Abhishek K., Rakesh Kumar V., Kumar A. Optimization of surface roughness in plasma arc cutting of AISID2 steel using TLBO. Materials Today: Proceedings, 2018, vol. 5, iss. 9 (3), pp. 18927–18932. DOI: 10.1016/j.matpr.2018.06.242. 8. Hoult A.P., Pashby I.R., Chan K. Fine plasma cutting of advanced aerospace materials. Journal of Materials Processing Technology, 1995, vol. 48 (1–4), pp. 825–831. DOI: 10.1016/0924-0136(94)01727-I. 9. Nandan Sharma D., Ram Kumar J. Optimization of dross formation rate in plasma arc cutting process by response surface method. Materials Today: Proceedings, 2020, vol. 32 (3), pp. 354–357. DOI: 10.1016/j. matpr.2020.01.605. 10. Gariboldi E., Previtali B. High tolerance plasma arc cutting of commercially pure titanium. Journal of Materials Processing Technology, 2005, vol. 160 (1), pp. 77–89. DOI: 10.1016/j.jmatprotec.2004.04.366. 11. Gostimirović M., Rodić D., Sekulić M., Aleksić A. An experimental analysis of cutting quality in plasma arc machining. Advanced Technologies & Materials, 2020, vol. 45 (1), pp. 1–8. DOI: 10.24867/ATM2020-1-001. 12. Cinar Z., Asmael M., Zeeshan Q. Developments in plasma arc cutting (PAC) of steel alloys: A review. Jurnal Kejuruteraan, 2018, vol. 30 (1), pp. 7–16. DOI: 10.17576/jkukm-2018-30(1)-02. 13. Kudrna L., Fries J., Merta M. Influences on plasma cutting quality on CNC machine. Multidisciplinary Aspects of Production Engineering, 2019, vol. 2 (1), pp. 108–117. DOI: 10.2478/mape-2019-0011. 14. Anakhov S.V., Guzanov B.N., Matushkin A.V., Pugacheva N.B., Pykin Y.A. Vliyanie konstruktivnykh osobennostei plazmotrona na kachestvo reza pri pretsizionnoi vozdushno-plazmennoi razdelke metalla [Influence of plasma torch design on cutting quality during precision air-plasma cutting of metal]. Izvestiya vysshikh uchebnykh zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy, 2020, vol. 63 (2), pp. 155–162. DOI: 10.17073/0368-0797-2020-2-155-162. 15. Peko I., Marić D., Nedić B., Samardžić I. Modeling and optimization of cut quality responses in plasma jet cutting of aluminium alloy EN AW-5083. Materials, 2021, vol. 14 (19), p. 5559. DOI: 10.3390/ma14195559. 16. Salonitis K., Vatousianos S. Experimental investigation of the plasma arc cutting process. Procedia CIRP, 2012, vol. 3, pp. 287–292. DOI: 10.1016/j.procir.2012.07.050. 17. Suresh A., Diwakar G. Optimization of process parameters in plasma arc cutting for TWIP steel plates. Materials Today: Proceedings, 2021, vol. 38 (5), pp. 2417–2424. DOI: 10.1016/j.matpr.2020.07.383. 18. Rubtsov V.E., Panfilov A.O., Knyazhev E.O., Nikolaeva A.V., Cheremnov A.M., Gusarova A.V., Beloborodov V.A., Chumaevskii A.V., Ivanov A.N. Otrabotka metodiki plazmennoi rezki medi marki M1, alyuminievogo splava D16T i titanovogo splava OT4-1 s ispol’zovaniem plazmotrona s obratnoi polyarnost’yu [Development of plasma cutting technique for C1220 copper, AA2024 aluminum alloy, and Ti-1,5Al-1,0Mn titanium alloy using a plasma torch with reverse polarity]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2022, vol. 24, no. 4, pp. 33–52. DOI: 10.17212/1994-63092022-24.4-33-52. 19. Matushkina I., Anakhov S., Pyckin Yu. Design of a new gas-dynamic stabilization system for a metalcutting plasma torch. Journal of Physics: Conference Series, 2021, vol. 2094, p. 042075. DOI: 10.1088/17426596/2094/4/042075. 20. Shchitsyn V.Yu., Yazovskikh V.M. Effect of polarity on the heat input into the nozzle of a plasma torch. Welding International, 2002, vol. 16 (6), pp. 485–487. DOI: 10.1080/09507110209549563. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1