OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 25 No. 4 2023 4. The thickness of the coatings, as well as its elemental composition, structure and microhardness, depended on the element-phase composition of the base material. The maximum thickness of the coating is achieved under the condition of the formation of single-layer coatings. The maximum microhardness of the coatings is achieved under the condition of the formation of a surface carbide layer, and is 20,000 MPa. References 1. Zhao H., Ding Y., Li J., Wei G., Zhang M. Corrosion resistance of laser melting deposited Cu-bearing 316L stainless steel coating in 0.5 M H2SO4 solution. Materials Chemistry and Physics, 2022, vol. 291, p. 126572. DOI: 10.1016/j.matchemphys.2022.126572. 2. Fan H.-Q., Lu P., Zhu X., Behnamian Y., Li Q. Development of superhydrophobic and corrosion resistant coatings on carbon steel by hydrothermal treatment and fluoroalkyl silane self-assembly. Materials Chemistry and Physics, 2022, vol. 290. p. 126569. DOI: 10.1016/j.matchemphys.2022.126569. 3. Hou X., Wang H., Yang Q., Chen Y., Chai L., Song B., Guo N., Guo S., Yao Z. Microstructure and properties of Cr-AlN composite coating prepared by pack-cementation on the surface of Al-containing ODS steel. Surface and Coatings Technology, 2022, vol. 447, p. 128842. DOI: 10.1016/j.surfcoat.2022.128842. 4. Singh V., Singla A.K., Bansal A. Impact of HVOF sprayed Vanadium Carbide (VC) based novel coatings on slurry erosion behaviour of hydro-machinery SS316 steel. Tribology International, 2022, vol. 176, p. 107874. DOI: 10.1016/j.triboint.2022.107874. 5. Yang K., Chen C., Xu G., Jiang Z., Zhang S., Liu X. HVOF sprayed Ni–Mo coatings improved by annealing treatment: microstructure characterization, corrosion resistance to HCl and corrosion mechanisms. Journal of Materials Research and Technology, 2022, vol. 19, pp. 1906–1921. DOI: 10.1016/j.jmrt.2022.05.181. 6. Ko S.-J., Lee Y.-H., Nam K.-S., Park E.-H., Kim J.-G. Effect of surface conditions on the localized corrosion of copper tubes. Materials Chemistry and Physics, 2023, vol. 302, p. 127747. DOI: 10.1016/j. matchemphys.2023.127747. 7. Zhang M., Shi X., Li Z., Xu H. Enhanced corrosion and wear resistance of gradient graphene-CrC nanocomposite coating on stainless steel. Carbon, 2021, vol. 174, pp. 693–709. DOI: 10.1016/j.carbon.2020.12.007. 8. Yu H., Luo Z., Zhang X., Feng Y., Xie G. A comparative study of the microstructure and corrosion resistance of Fe-based/B4C composite coatings with Ni-added or Cu-added by vacuum cladding. Materials Letters, 2023, vol. 335, p. 133730. DOI: 10.1016/j.matlet.2022.133730. 9. Li R., Cheng C., Pu J. NaCl-induced hot-corrosion behavior of TiAlN single-layer and TiAlN/Ti multilayer coatings at 500°C. Materials Today Communications, 2022, vol. 33, p. 104421. DOI: 10.1016/j. mtcomm.2022.104421. 10. Nóvoa X.R., Pérez C. The use of smart coatings for metal corrosion control. Current Opinion in Electrochemistry, 2023, vol. 40, p. 101324. DOI: 10.1016/j.coelec.2023.101324. 11. Li Q., Song P., Zhang R., Li Z., Wang Y., Du P., Lu J. Oxidation behavior and Cr-Zr diffusion of Cr coatings prepared by atmospheric plasma spraying on zircaloy-4 cladding in steam at 1300 °C. Corrosion Science, 2022, vol. 203, p. 110378. DOI: 10.1016/j.corsci.2022.110378. 12. Sahu J.N., Sasikumar C. Development of hard and wear resistant surface coating on Ni-Cr-Mo steel by surface mechano-chemical carburization treatment (SMCT). Journal of Materials Processing Technology, 2019, vol. 263, pp. 285–295. DOI: 10.1016/j.jmatprotec.2018.08.027. 13. Dervishi E., McBride M., Edwards R., Gutierrez M., Li N., Buntyn R., Hooks D.E. Mechanical and tribological properties of anodic Al coatings as a function of anodizing conditions. Surface and Coatings Technology, 2022, vol. 444, p. 128652. DOI: 10.1016/j.surfcoat.2022.128652. 14. Lakhtin Yu.M., Arzamasov B.N. Khimiko-termicheskaya obrabotka metallov [Chemical and thermal treatment of metals]. Moscow, Metallurgiya Publ., 1985. 256 p. 15. Meißner T.M., Oskay C., Bonk A., Grégoire B., Donchev A., Solimani A., Galetz M.C. Improving the corrosion resistance of ferritic-martensitic steels at 600 °C in molten solar salt via diffusion coatings. Solar Energy Materials and Solar Cells, 2021, vol. 227, p. 111105. DOI: 10.1016/j.solmat.2021.111105. 16. Nurakov S., Belotserkovsky M., Suleimenov T., Aitlessov K. Application of chemical-thermal treatment for hardening of sprayed with supersonic coatings. Procedia Computer Science, 2019, vol. 149, pp. 360–364. DOI: 10.1016/j.procs.2019.01.149.
RkJQdWJsaXNoZXIy MTk0ODM1