Features of the formation of Ni-Cr coatings obtained by diffusion alloying from low-melting liquid metal solutions

OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 25 No. 4 2023 17. Liu Y.D., Li W. Inhibiting effect of Ni/Re diffusion barrier on the interdiffusion between Ni-based coating and titanium alloys. Materials Today Communications, 2023, vol. 35, p. 106192. DOI: 10.1016/j. mtcomm.2023.106192. 18. Sokolov A.G., Bobylyov E.E. Kinetika formirovaniya pokrytii na baze karbida titana, nanesennykh po tekhnologii diffuzionnoi metallizatsii iz sredy legkoplavkikh zhidkometallicheskikh rastvorov, na splavakh tipa TK i VK [The kinetics of formation of coatings based on titanium carbide during diffusion metallization from the fusible liquid metal solutions, on the hard alloys]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2016, no. 2 (71), pp. 59–69. DOI: 10.17212/1994-63092016-2-59-69. 19. SokolovA.G.,BobylyovE.E. Povyshenie iznosostoikosti izdelii izaustenitnykhstalei putemsovmeshcheniya tekhnologii tsementatsii i diffuzionnogo legirovaniya v srede legkoplavkikh zhidkometallicheskikh rasplavov [Increase of durability of austenitic steel by overlap of carburization and diffusion saturation from liquid metal medium solutions technologies]. Zhurnal Sibirskogo federal’nogo universiteta. Tekhnika i tekhnologii = Journal of Siberian Federal University. Engineering & Technologies, 2020, vol. 13 (4), pp. 502–511. DOI: 10.17516/1999494X-0241. 20. Sokolov A.G., Bobylev E.E., Storozhenko I.D. Formation of diffusion coatings based on nickel and chromium in the medium of fusible liquid metal solutions on austenitic steels. Solid State Phenomena, 2021, vol. 316, pp. 851–856. 21. Sokolov A.G. Razrabotka teoreticheskikh i tekhnologicheskikh osnov povysheniya stoikosti rezhushchego i shtampovogo instrumenta za schet diffuzionnoi metallizatsii iz sredy legkoplavkikh zhidkometallicheskikh rastvorov. Diss dokt. tekhn. nauk [Development of theoretical and technological bases for increasing the durability of cutting and stamping tools due to diffusion metallization from the medium of low-melting liquid metal solutions. Dr. tech. sci. diss.]. Krasnodar, 2008. 384 p. Conflicts of Interest The authors declare no conflict of interest.  2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).

RkJQdWJsaXNoZXIy MTk0ODM1