OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 25 No. 4 2023 3. Zhu K., Jiang W., Wu J., Zhang B. Effect of Mo on properties of the industrial Fe–B-alloy-derived Fe-based bulk metallic glasses. International Journal of Minerals, Metallurgy and Materials, 2017, vol. 24, pp. 926–930. DOI: 10.1007/s12613-017-1479-1. 4. WangW.M., ZhangW.X., GebertA., Mickel C., Schultz L. Microstructure andmagnetic properties in Fe61Co9-x Zr8Mo5WxB17(0 ≤ х ≤ 3) glasses and glass-matrix composites. Metallurgical and Materials Transactions A, 2009, vol. 40 (3), pp. 511–521. DOI: 10.1007/s11661-008-9706-z. 5. Wang J.Q., LiuY.H., ChenM.W., Xie G.Q. Louzguine-Luzgin D.V., InoueA., Perepezko J.H. Rapid degradation of azo dye by Fe-based metallic glass powder. Advanced Functional Materials, 2012, vol. 22 (12), pp. 2567–2570. DOI: 10.1002/adfm.201103015. 6. Wang X., Pan Y., Zhu Z., Wu J. Efficient degradation of rhodamine B using Fe-based metallic glass catalyst by Fenton-like process. Chemosphere, 2014, vol. 117, pp. 638–643. DOI: 10.1016/j.chemosphere.2014.09.055. 7. Zhang H., Hu Y., Hou G., An Y., Liu G. The effect of high-velocity oxy-fuel spraying parameters on microstructure, corrosion and wear resistance of Fe-based metallic glass coatings. Journal of Non-Crystalline Solids, 2014, vol. 406, pp. 37–44. DOI: 10.1016/j.jnoncrysol.2014.09.041. 8. Wang Y., Jiang S.L., Zheng Y.G., Ke W., Sun W.H., Wang J.Q. Effect of molybdenum, manganese and tungsten contents on the corrosion behavior and hardness of iron-based metallic glasses. Materials and Corrosion, 2014, vol. 65, pp. 733–741. DOI: 10.1002/maco.201206740. 9. Wu H., Lan X.-d., Liu Y., Li F., Zhang W.-d., Chen Z.-j., Zai X.-f., Zeng H. Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating. Transactions of Nonferrous Metals Society of China, 2016, vol. 26 (6), pp. 1629–1637. DOI: 10.1016/S1003-6326(16)64271-1. 10. Wang Y., Ouyang G., Zhang L., Wu X., Zhang H., Wang S. Corrosion resistance of coating with Fe-based metallic glass powders fabricated by laser spraying. Journal of Applied Sciences, 2013, vol. 13 (9), pp. 1479–1483. DOI: 10.3923/jas.2013.1479.1483. 11. Li N., Xu E., Liu Z., Wang X., Liu L. Tuning apparent friction coefficient by controlled patterning bulk metallic glasses surfaces. Scientific Reports, 2016, vol. 6 (1), p. 39388. DOI: 10.1038/srep39388. 12. Hitit A., Şahin H. The effect of iron content on glass forming ability and thermal stability of Co–Fe–Ni–Ta– Nb–B–Si bulk metallic glass. Metals, 2017, vol. 7 (1), p. 7. DOI: 10.3390/met7010007. 13. Burkov A.A. Deposition of metallic glass coatings by electrospark processing in the medium of granules of Fe39Ni8Cr7W7Mo7Co2C16B14 composition. Pis’ma o materialakh = Letters on materials, 2017, vol. 7 (3), pp. 254–259. DOI: 10.22226/2410-3535-2017-3-254-259. (In Russian). 14. Zohdi H., Shahverdi H.R., Hadavi S.M. Effect of Nb addition on corrosion behavior of Fe-based metallic glasses in Ringer’s solution for biomedical applications. Electrochemistry Communications, 2011, vol. 13 (8), pp. 840–843. DOI: 10.1016/j.elecom.2011.05.017. 15. Madinehei M., Brun P., Duarte M.J., Pined E., Klemm J., Renner F.U. Glass-formation and corrosion properties of Fe–Cr–Mo–C–B glassy ribbons with low Cr content. Journal of Alloys and Compounds, 2014, vol. 615, pp. S128–S131. DOI: 10.1016/j.jallcom.2013.12.245. 16. Sagasti A., Lopes A.C., Lasheras A., Palomares V., Carrizo J., Gutierrez J., Barandiaran J.M. Corrosion resistant metallic glasses for biosensing applications. AIP Advances,Special Collection:23rd Soft Magnetic Materials Conference, 2018, vol. 8 (4), p. 047702. DOI: 10.1063/1.4994108. 17. Burkov A.A., Pyachin S.A., Ermakov M.A., Syuy A.V. In situ synthesis and characterization of Fe-based metallic glass coatings by electrospark deposition technique. Journal of Materials Engineering and Performance, 2017, vol. 26, pp. 901–908. DOI: 10.1007/s11665-016-2493-6. 18. Zhang C., Chu Z., Wei F., Qin W., Yang Y., Dong Y., Huang D., Wang L. Optimizing process and the properties of the sprayed Fe-based metallic glassy coating by plasma spraying. Surface and Coatings Technology, 2017, vol. 319, pp. 1–5. DOI: 10.1016/j.surfcoat.2017.03.063. 19. Liu L., Zhang C. Fe-based amorphous coatings: Structures and properties. Thin Solid Films, 2014, vol. 561, pp. 70–86. DOI: 10.1016/j.tsf.2013.08.029. 20. Li Q.H., Yue T.M., Guo Z.N., Lin X. Microstructure and corrosion properties of AlCoCrFeNi high entropy alloy coatings deposited on AISI 1045 steel by the electrospark process. Metallurgical and Materials Transactions A, 2013, vol. 44A, pp. 1767–1778. DOI: 10.1088/2051-672X/ab411b. 21. Lyashenko B.A., Podchernyaeva I.A., Konevtsov L.A., Kovalenko S.V., Kaminskii A.V. Materialogiya pokrytii titanovykh splavov metodami fizikokhimii i elektroiskrovogo legirovaniya. V 2 ch. Ch. 2. EIL-pokrytiya [Materialogy of coatings of titanium alloys by methods of physical chemistry and electrospark alloying. In 2 vol. Vol. 2. ESA coatings]. Khabarovsk, Pacific National University Publ., 2020. 347 p. ISBN 978-5-7389-3025-6.
RkJQdWJsaXNoZXIy MTk0ODM1