OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 25 No. 4 2023 5. Sharma S.S., Rajpoot Y.S. Development of aluminummetal foam using blowing agent. IOP Conference Series: Materials Science and Engineering, 2018, vol. 377 (1), p. 012150. DOI: 10.1088/1757-899X/377/1/012150. 6. Ghaleh M.H., Ehsani N., Baharvandi H.R. High-porosity closed-cell aluminum foams produced by melting method without stabilizer particles. International Journal of Metalcasting, 2021, vol. 15, pp. 899–905. DOI: 10.1007/ s40962-020-00528-w. 7. Farahani M.R., Rezaei Ashtiani H.R., Elahi S.H. Effect of zinc content on the mechanical properties of closedcell aluminum foams. International Journal of Metalcasting, 2022, vol. 16 (2), pp. 713–722. DOI: 10.1007/s40962021-00635-2. 8. ByakovaA.V., Gnyloskurenko S.V., Nakamura T. Effect of CaCO3 foaming agent at formation and stabilization of Al-based foams fabricated by powder compact technique. Materials Transactions, 2017, vol. 58 (2), pp. 249–258. DOI: 10.2320/matertrans.M2016314. 9. Mondal D.P., Goel M.D., Bagde N, Jha N., Sahu S., Barnwal A.K. Closed cell ZA27–SiC foam made through stir-casting technique. Materials & Design, 2014, vol. 57, pp. 315–324. DOI: 10.1016/j.matdes.2013.12.026. 10. TanW., LiuY., Zhou C., Chen X., Li Y. Fabrication, properties, and applications of open-cell aluminum foams: A review. Journal of Materials Science & Technology, 2021, vol. 62, pp. 11–24. DOI: 10.1016/j.jmst.2020.05.039. 11. Byakova A., Sirko A., Mykhalenkov K., Milman Yu., Gnyloskurenko S., Nakamura T. Improvements in stabilisation and cellular structure ofAl based foams with novel carbonate foaming agent. High Temperature Materials and Processes, 2007, vol. 26 (4), pp. 239–246. DOI: 10.1515/HTMP.2007.26.4.239. 12. Singh Sh., Bhatnagar N. A survey of fabrication and application of metallic foams (1925–2017). Journal of Porous Materials, 2018, vol. 25, pp. 537–554. DOI: 10.1007/s10934-017-0467-1. 13. Naeem M.A., Gábora A., Mankovits T. Influence of the manufacturing parameters on the compressive properties of closed cell aluminum foams. Periodica Polytechnica Mechanical Engineering, 2020, vol. 64 (2), pp. 172–178. DOI: 10.3311/PPme.16195. 14. Gao H., Xiong C., Yin J., Deng H. Research on dynamic accumulation effect and constitutive model of aluminum foams under dynamic impact. International Journal of Metalcasting, 2019, vol. 13 (1), pp. 146–157. DOI: 10.1007/s40962-018-0245-0. 15. Binesh F., Zamani J., Ghiasvand M. Ordered structure composite metal foams produced by casting. International Journal of Metalcasting, 2018, vol. 12, pp. 89–96. DOI: 10.1007/s40962-017-0143-x. 16. Bolat Ç., Akgün İ.C., Gökşenli A. Effect of aging heat treatment on compressive characteristics of bimodal aluminum syntactic foams produced by cold chamber die casting. International Journal of Metalcasting, 2022, vol. 16 (2), pp. 646–662. DOI: 10.1007/s40962-021-00629-0. 17. Temiz A., Yaşar M., Koç E. Fabrication of open-pore biodegradable magnesium alloy scaffold via infiltration technique. International Journal of Metalcasting, 2022, vol. 16, pp. 317–328. DOI: 10.1007/s40962-021-00604-9. 18. Verma K.S., Muchhala D., Panthi S.K., Mondal D.P. Influences of cell size, cell wall thickness and cell circularity on the compressive responses of closed-cell aluminum foam and its FEA analysis. International Journal of Metalcasting, 2022, vol. 16 (2), pp. 798–813. DOI: 10.1007/s40962-021-00627-2. 19. Chen K., Guo L., Wang H. A review on thermal application of metal foam. Science China Technological Sciences, 2020, vol. 63 (12), pp. 2469–2490. DOI: 10.1007/s11431-020-1637-3. 20. Tan P.J., Reid S.R., Harrigan J.J. On the dynamic mechanical properties of open-cell metal foams A reassessment of the ‘simple-shock theory’. International Journal of Solids and Structures, 2012, vol. 49 (19–20), pp. 2744–2753. DOI: 10.1016/j.ijsolstr.2012.03.026. 21. Hajizadeh M., Yazdani M., Vesali S., Khodarahmi H., Mostofi T.M. An experimental investigation into the quasi-static compression behavior of open-cell aluminum foams focusing on controlling the space holder particle size. Journal of Manufacturing Processes, 2021, vol. 70, pp. 193–204. DOI: 10.1016/j.jmapro.2021.08.043. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1