OBRABOTKAMETALLOV Vol. 23 No. 3 2021 MATERIAL SCIENCE EQUIPMENT. INSTRUMENTS 6 2 4 29. Merritt H.E. Theory of self-excited machine-tool chatter: contribution to machine-tool chatter research – 1. Journal of Engineering for Industry, 1965, vol. 87 (4), pp. 447–454. DOI: 10.1115/1.3670861. 30. Zhou G., Yuan M., Feng F., Han Z., Song X., Wang X., Feng P., Zhang M. A new algorithm for chatter quantification and milling instability classification based on surface analysis. Mechanical Systems and Signal Processing, 2023, vol. 204, p. 110816. DOI: 10.1016/j.ymssp.2023.110816. 31. Kudinov V.A. Dinamika stankov [Dynamics of machine tools]. Moscow, Mashinostroenie Publ., 1967. 359 p. 32. Tlusty J., Polacek A., Danek C., Spacek J. Selbsterregte Schwingungen an Werkzeugmaschinen. Berlin, VerlagTechnik, 1962. 320 p. 33. Tlusty J., Ismail F. Basic non-linearity in machining chatter. CIRP Annals, 1981, vol. 30, pp. 299–304. 34. Hanna N.H., Tobias S. A theory of nonlinear regenerative chatter. Journal of Engineering for Industry, 1974, vol. 96 (1), pp. 247–255. DOI: 10.1115/1.3438305. 35. Wahi P., Chatterjee A. Self-interrupted regenerative metal cutting in turning. International Journal NonLinear Mechanics, 2008, vol. 43, pp. 111–123. DOI: 10.1016/j.ijnonlinmec.2007.10.010. 36. Stépán G., Szalai R., Insperger T. Nonlinear dynamics of high-speed milling subjected to regenerative effect. Nonlinear Dynamics of Production Systems. Weinheim, Wiley-VCH, 2004, pp. 111–127. DOI: 10.1002/ 3527602585.ch7. 37. Stépán G., Insperger T., Szalai R. Delay, parametric excitation, and the nonlinear dynamics of cutting processes. International Journal of Bifurcation and Chaos, 2005, vol. 15 (9), pp. 2783–2798. DOI: 10.1142/ S0218127405013642. 38. Brissaud D., Gouskov A., Guibert N., Rech J. Influence of the ploughing effect on the dynamic behavior of the self-vibratory drilling head. CIRP Annals. Manufacturing Technology, 2008, pp. 385–388. DOI: 10.1016/j. cirp.2008.03.101. 39. Gouskov A., Guskov M., Lorong Ph., Panovko G. Influence of the clearance face on the condition of chatter selfexcitation during turning International. Journal of Machining and Machinability of Materials, 2017, vol. 19 (1), pp. 17–39. DOI: 10.1504/IJMMM.2017.10002088. 40. Voronov S.A., Kiselev I.A. Nelineinye zadachi dinamiki protsessov rezaniya [Nonlinear problems of cutting process dynamics]. Mashinostroenie i inzhenernoe obrazovanie = Mechanical Engineering and Engineering Education, 2017, no. 2 (51), pp. 9–23. 41. Gouskov A.M., Guskov M.A., Dinh Dyk T., Panovko G.Ya. Modeling and investigation of the stability of a multicutter turning process by a trace. Journal of Machinery Manufacture and Reliability, 2018, vol. 47 (4), pp. 317–323. DOI: 10.3103/S1052618818040052. Translated from Problemy mashinostroeniya i nadezhnosti mashin, 2018, no. 4, pp. 19–27. DOI: 10.31857/S023571190000533-7. 42. Gouskov A.M., Panovko G.Ya., Shokhin A.E. Dynamics of the rotor system of a vibrational-centrifugal separator with an elastic vibration limiter. Journal of Machinery Manufacture and Reliability, 2023, vol. 51 (8), pp. 733–745. DOI: 10.3103/S105261882208009X. 43. Veits V.L., Vasilkov D.V. Zadachi dinamiki, modelirovaniya i obespecheniya kachestva pri mekhanicheskoi obrabotke malozhestkikh zagotovok [Problems of dynamics, modeling and quality assurance in machining of lowrigid workpieces]. STIN, 1999, no. 6, pp. 9–13. (In Russian). 44. Altitias Y., Budak E. Analytical prediction of stability lobes in milling. CIRP Annals. Manufacturing Technology, 1995, vol. 44 (1), pp. 357–362. DOI: 10.1016/S0007-8506(07)62342-7. 45. Altitias Y., Weck M. Chatter stability of metal cutting and grinding. CIRP Annals. Manufacturing Technology, 2004, vol. 53 (2), pp. 619–642. DOI: 10.1016/S0007-8506(07)60032-8. 46. Insperger T, Stépán G. Semi-discretization method for delayed systems. International Journal for Numerical Methods in Engineering, 2002, vol. 55 (5), pp. 503–518. DOI: 10.1002/nme.505. 47. Zakovorotnyi V.L., Gvindjiliya V.E. Vliyanie fluktuatsii na ustoichivost’ formoobrazuyushchikh traektorii pri tochenii. Izvestiya vysshikh uchebnykh zavedenii. Severo-Kavkazskii region. Tekhnicheskie nauki = University News. North-Caucasian Region. Technical Sciences Series, 2017, no. 2 (194), pp. 52–61. 48. Zakovorotny V.L., Lukyanov A.D., Gubanova A.A., Hristoforova V.V. Bifurcation of stationary manifolds formed in the neighborhood of the equilibrium in a dynamic system of cutting. Journal of Sound and Vibration, 2016, vol. 368, pp. 174–190. DOI: 10.1016/j.jsv.2016.01.020. 49. Murashkin L.S., Murashkin S.L. Prikladnaya nelineinaya mekhanika stankov [Applied nonlinear mechanics of machines]. Leningrad, Mashinostroenie Publ., 1977. 192 p. 50. Grabec I. Chaos generated by the cutting process. Physics Letters, 1986, vol. 117, pp. 384–386. DOI: 10.1016/0375-9601(86)90003-4.
RkJQdWJsaXNoZXIy MTk0ODM1