Influence of dynamic characteristics of the turning process on the workpiece surface roughness

OBRABOTKAMETALLOV Vol. 26 No. 2 2024 156 EQUIPMENT. INSTRUMENTS 5. Suslov A.G. Kachestvo poverkhnostnogo sloya detalei mashin [The quality of the surface layer of machine parts]. Moscow, Mashinostroenie Publ., 2000. 320 p. 6. Suslov A.G. Tekhnologicheskoe obespechenie parametrov sostoyaniya poverkhnostnogo sloya detalei [Technological support of the parameters of the state of the surface layer of the part]. Moscow, Mashinostroenie Publ., 1987. 206 p. 7. Demkin N.B. Kachestvo poverkhnosti i kontakt detalei mashin [Surface quality and contact of machine parts]. Moscow, Mashinostroenie Publ., 1981. 244 p. 8. Benga G.C., Abrao A.M. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools. Journal of Materials Processing Technology, 2003, vol. 143, pp. 237–241. DOI: 10.1016/S0924-0136(03)00346-7. 9. Choudhury I.A., El-Baradie M.A. Surface roughness prediction in the turning of high-strength steel by factorial design of experiments. Journal of Materials Processing Technology, 1997, vol. 67, pp. 55–61. DOI: 10.1016/S09240136(96)02818-X. 10. Upadhyay V., Jain P.K., Mehta N.K. In-process prediction of surface roughness in turning of Ti–6Al–4V alloy using cutting parameters and vibration signals. Measurement, 2013, vol. 46 (1), pp. 154–160. DOI: 10.1016/j. measurement.2012.06.002. 11. Hahn R.S. On the theory of regenerative chatter in precision grinding operation. Transactions of American Society of Mechanical Engineers, 1954, vol. 76, pp. 356–260. 12. Merritt H.E. Theory of self-excited machine-tool chatter: contribution to machine-tool chatter research. Journal of Engineering for Industry, 1965, vol. 87, pp. 447–454. DOI: 10.1115/1.3670861. 13. Tobias S.A., Fishwick W. Theory of regenerative machine tool chatter. The Engineer, 1958, vol. 205 (7), pp. 199–203. 14. Litak G. Chaotic vibrations in a regenerative cutting process. Chaos Solitons & Fractals, 2002, vol. 13, pp. 1531–1535. DOI: 10.1016/S0960-0779(01)00176-X. 15. Zakovorotny V., Gvindjiliya V. Correlation of attracting sets of tool deformations with spatial orientation of tool elasticity and regeneration of cutting forces in turning. Izvestiya VUZ. Applied Nonlinear Dynamics, 2022, vol. 30 (1), pp. 37–56. DOI: 10.18500/0869-6632-2022-30-1-37-56. 16. Persson H., Agmell M., Bushlya V., Stahl J. Experimental and numerical investigation of burr formation in intermittent turning of AISI 4140. Procedia CIRP, 2017, vol. 58, pp. 37–42. DOI: 10.1016/j.procir.2017.03.165. 17. Patel K.A., Brahmbhatt P.K. A comparative study of the RSM and ANN models for predicting surface roughness in roller burnishing. Procedia Technology, 2016, vol. 23, pp. 391–397. DOI: 10.1016/j.protcy.2016.03.042. 18. Alam S.T., Tomal A.N.M., NayeemM.K. High-speed machining of Ti–6Al–4V: RSM-GAbased optimization of surface roughness andMRR. Results in Engineering, 2023, vol. 17, p. 100873. DOI: 10.1016/j.rineng.2022.100873. 19. Abu-Mahfouz I., Rahman A.H.M.E., Banerjee A. Surface roughness prediction in turning using three artifi cial intelligence techniques: A comparative study. Procedia Computer Science, 2018, vol. 140, pp. 258–267. DOI: 10.1016/j.procs.2018.10.322. 20. Laghari R.A., Samir M. Comprehensive approach toward IIoT based condition monitoring of machining processes. Measurement, 2023, vol. 217, p. 113004. DOI: 10.1016/j.measurement.2023.113004. 21. Altintas Y., Kersting P., Biermann D., Budak E., Denkena B. Virtual technological systems for parts processing operations. CIRP Annals, 2014, vol. 63 (2), pp. 585–605. DOI: 10.1016/j.cirp.2014.05.007. 22. Altintas Y., Eynian M., Onozuka H. Identifi cation of dynamic cutting force coeffi cients and chatter stability with process damping. CIRP Annals, 2008, vol. 57 (1), pp. 371–374. DOI: 10.1016/j.cirp.2008.03.048. 23. Altintas Y., Tuysuz O., Habibi M., Li Z.L. Virtual compensation of defl ection errors in ball end milling of fl exible blades. CIRP Annals, 2008, vol. 57 (1), pp. 371–374. DOI: 10.1016/j.cirp.2008.03.048. 24. Kabaldin Y.G., Shatagin D.A., Kuzmishina A.M. The development of a digital twin of a cutting tool for mechanical production. Proceedings of Higher Educational Institutions. Machine Building, 2019, vol. 4, pp. 11–17. DOI: 10.18698/0536-1044-2019-4-11-17. 25. Voronov S.A., Kiselev I.A. Nelineinye zadachi dinamiki protsessov rezaniya [Nonlinear problems of cutting process dynamics]. Mashinostroenie i inzhenernoe obrazovanie = Mechanical Engineering and Engineering Education, 2017, no. 2 (51), pp. 9–23. 26. Zakovorotny V.L., Bordachev E.V. Prognozirovanie i diagnostika kachestva obrabatyvaemoi detali na tokarnykh stankakh s ChPU [Prediction and diagnostics of the quality of the workpiece on CNC lathes]. Izvestiya vysshikh uchebnykh zavedenii. Mashinostroenie = Proceedings of Higher Educational Institutions. Machine Building, 1996, no. 1, pp. 95–104. 27. Zakovorotny V.L., Gvindzhiliya V.E. Infl uence of spindle wobble in turning on the workpiece’s surface topology. Russian Engineering Research, 2018, vol. 38, pp. 818–823. DOI: 10.3103/S1068798X18100192.

RkJQdWJsaXNoZXIy MTk0ODM1