Influence of dynamic characteristics of the turning process on the workpiece surface roughness

OBRABOTKAMETALLOV Vol. 26 No. 2 2024 157 EQUIPMENT. INSTRUMENTS 28. Zakovorotny V.L., Lukyanov A.D., Gubanova A.A., Hristoforova V.V. Bifurcation of stationary manifolds formed in the neighborhood of the equilibrium in a dynamic system of cutting. Journal of Sound and Vibration, 2016, vol. 368, pp. 174–190. DOI: 10.1016/j.jsv.2016.01.020. 29. Sankin Yu.N., Sankin N.Yu. Ustoichivost’ tokarnykh stankov pri nelineinoi kharakteristike protsessa rezaniya [Stability of lathes with nonlinear characteristics of the cutting process]. Ulyanovsk, UlSTU Publ., 2008. 137 p. 30. ZakovorotnyV.L., GvindjiliyaV.E. Zavisimost’iznashivaniya instrumenta i parametrov kachestva formiruemoi rezaniem poverkhnosti ot dinamicheskikh kharakteristik [The dependence of tool wear and quality parameters of the surface being cut on dynamic characteristics]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2019, vol. 21, no. 4, pp. 31–46. DOI: 10.17212/1994-6309-201921.4-31-46. 31. Zakovorotniy V.L., Pham D.T., Nguyen X.Ch., Ryzhkin M.N. Modelirovanie dinamicheskoi svyazi, formiruemoi protsessom tocheniya, v zadachakh dinamiki protsessa rezaniya (pozitsionnaya svyaz’) [Dynamic coupling modeling formed by turning in cutting dynamics problems (positional coupling)]. Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta = Vestnik of Don State Technical University, 2011, vol. 11 (3), pp. 301–311. 32. Ali M.H., Khidhir B.A., Ansari M.N.M., Mohamed B. FEM to predict the eff ect of feed rate on surface roughness with cutting force during face milling of titanium alloy. Housing and Building National Research Center Journal, 2013, vol. 9 (3), pp. 263–269. DOI: 10.1016/j.hbrcj.2013.05.003. Confl icts of Interest The authors declare no confl ict of interest. © 2024 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).

RkJQdWJsaXNoZXIy MTk0ODM1