OBRABOTKAMETALLOV MATERIAL SCIENCE Том 23 № 3 2021 EQUIPMEN . INSTRUM TS Vol. 6 No. 2 2024 surface being cut on dynamic characteristics]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2019, vol. 21, no. 4, pp. 31–46. DOI: 10.17212/1994-6309-201921.4-31-46. 31. Zakovorotniy V.L., Pham D.T., Nguyen X.Ch., Ryzhkin M.N. Modelirovanie dinamicheskoi svyazi, formiruemoi protsessom tocheniya, v zadachakh dinamiki protsessa rezaniya (pozitsionnaya svyaz’) [Dynamic coupling modeling formed by turning in cutting dynamics problems (positional coupling)]. Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta = Vestnik of Don State Technical University, 2011, vol. 11 (3), pp. 301–311. 32. Ali M.H., Khidhir B.A., Ansari M.N.M., Mohamed B. FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy. Housing and Building National Research Center Journal, 2013, vol. 9 (3), pp. 263–269. DOI: 10.1016/j.hbrcj.2013.05.003. Conflicts of Interest The authors declare no conflict of interest. 2024 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1