OBRABOTKAMETALLOV Vol. 26 No. 2 2024 183 MATERIAL SCIENCE Thermal stability of extruded Mg-Y-Nd alloy structure Anna Eroshenko1, a,*, Elena Legostaeva1, b, Ivan Glukhov1, c, Pavel Uvarkin1, d, Aleksei Tolmachev1, e, Yurii Sharkeev 1, 2, f 1 Institute of Strength Physics and Materials Sciences SB RAS, 2/4, pr. Akademicheskii, Tomsk, 634055, Russian Federation 2 National Research Tomsk Polytechnic University, 30 Lenin Avenue, Tomsk, 634050, Russian Federation a https://orcid.org/0000-0001-8812-9287, eroshenko@ispms.ru; b https://orcid.org/0000-0003-3684-9930, lego@ispms.ru; c https://orcid.org/0000-0001-5557-5950, gia@ispms.ru; d https://orcid.org/0000-0003-1169-3765, uvarkin@ispms.ru; e https://orcid.org/0000-0003-4669-8478, tolmach@ispms.ru; f https://orcid.org/0000-0001-5037-245X, sharkeev@ispms.ru Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2024 vol. 26 no. 2 pp. 174–185 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2024-26.2-174-185 ART I CLE I NFO Article history: Received: 19 October 2023 Revised: 16 November 2023 Accepted: 20 March 2024 Available online: 15 June 2024 Keywords: Mg-Y-Nd alloy Extruded alloy Microstructure Phase composition Thermal stability Funding The work was performed according to the Government Research Assignment for the Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences (ISPMS SB RAS), project No. FWRW-2021-0004. Experimental research was conducted using the equipment of the Common Use Center “Nanotech” at the Institute of Strength, Physics, and Materials Science, SB RAS (ISPMS SB RAS, Tomsk, Russia). Acknowledgements The authors are grateful to engineer Juergen Schmid (Department of Electrochemistry, Innovent Technology Development, Germany) and researcher. Chebodeva V.V. (IPPM SB RAS) for assistance in carrying out a number of experimental works. ABSTRACT Introduction. Today, bioresorbable magnesium alloys possessing the required physical, mechanical, corrosion, and biological properties, are promising materials for orthopedic and cardiovascular surgery. The addition of rare earth elements such as yttrium, neodymium, and cerium to magnesium alloys improves its properties. Compared to widely used titanium alloys, magnesium alloys have a number of advantages. Bioresorbable materials slowly dissolve in the body, and recurrent operation to remove the implant is not needed. Biocompatible magnesium alloys have a fairly low elastic modulus (10 to 40 GPa), approaching to that of cortical bone, that reduces the contact stress in the bone-implant system. At the same time, strength properties of magnesium alloys alloyed with rare earth elements do not always meet the requirements for medical applications. Severe plastic deformation, for example, equal channel angular pressing, torsion under quasihydrostatic pressure, uniaxial forging, extrusion, is therefore very promising technique to gain the high level of mechanical properties of metals and alloys. Severe plastic deformation of magnesium alloys improves its structural strength by 2.5 times due to the generation of an ultrafi ne-grained and/or fi ne-grained structure. The issues related to the study of heat resistance, structure and phase composition of magnesium alloys with appropriate strength are relevant. Purpose of the work is to determine the infl uence of thermal eff ects on the microstructure of the extruded Mg-Y-Nd alloy. Methodology. The extruded Mg-2.9Y-1.3Nd alloy (95.0 wt. % Mg, 2.9 wt. % Y, 1.3 wt. % Nd, ≤ 0.2 wt. % Fe, ≤ 0 wt. % Al) is investigated in this paper. The thermal stability of the alloy microstructure is studied after annealing at 100, 300, 350, 450 and 525 °С in argon for one hour. The microstructure and phase composition are investigated using optical, transmission and scanning electron microscopes and analyzed on an X-ray diff ractometer. Results and discussion. The extruded Mg-2.9Y-1.3Nd alloy has the bimodal fi ne-grained microstructure. It is found that along with the stable α-Mg phase, the alloy structure consists of Mg24Y5 intermetallic particles and β-, β′-, and β1-phase precipitates. Annealing in the temperature range of 100–450 °С for one hour has no eff ect on the structure of the Mg-2.9Y-1.3Nd alloy, but promotes the growth in the linear dimensions of β-, β′-, and β1-phases precipitates. In the temperature range of 300–450 °С, the morphology of β-, β′,- and β1-phases changes, while the average grain size of the major α-phase remains unchanged. Annealing at 525 °С leads to a notable transformation of the bimodal microstructure of the alloy, which is associated with the intensive growth in the grain size of the α-phase, Mg24Y5 particles, and β-, β′-, and β1-phases precipitates. Annealing in the temperature range of 100–450 °C leads to an increase in the linear dimensions of Mg24Y5 particles, β-, β′-, and β1-phases precipitates and bimodal microstructure of the Mg-2.9Y-1.3Nd alloy remains unchanged. For citation: Eroshenko A.Yu., Legostaeva E.V., Glukhov I.A., Uvarkin P.V., Tolmachev A.I., Sharkeev Yu.P. Thermal stability of extruded Mg-Y-Nd alloy structure. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 2, pp. 174–185. DOI: 10.17212/1994-6309-2024-26.2-174-185. (In Russian). ______ * Corresponding author Eroshenko Anna Yu., Ph.D. (Engineering), Senior research fellow Institute of Strength Physics and Materials Sciences SB RAS, 2/4, pr. Akademicheskii, 634055, Tomsk, Russian Federation Tel.: +7 3822 28-69-11, e-mail: eroshenko@ispms.ru
RkJQdWJsaXNoZXIy MTk0ODM1