ОБРАБОТКА МЕТАЛЛОВ Том 26 № 3 2024 42 ТЕХНОЛОГИЯ W.Q. Cao, Y. Han, C.Y. Wang, C.X. Huang, H. Dong // Journal of Iron and Steel Research International. – 2015. – Vol. 22 (1). – P. 42–47. – DOI: 10.1016/S1006706X(15)60007-3. 24. Kim N.J., Thomas G. Eff ects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel // Metallurgical Transactions A. – 1981. – Vol. 12. – P. 483–489. – DOI: 10.1007/BF02648546. 25. Liang X. The complex phase transformation of austenite in high strength linepipe steels and its infl uence on the mechanical properties: diss. – University of Pittsburgh, 2012. 26. Eff ect of microstructure on the yield ratio and low temperature toughness of linepipe steels / Y.M. Kim, S.K. Kim, Y.J. Lim, N.J. Kim // ISIJ International. – 2002. – Vol. 42 (12). – P. 1571–1577. – DOI: 10.2355/ isijinternational.42.1571. 27. Separation phenomenon occurring during the Charpy impact test of API X80 pipeline steels / S.Y. Shin, S. Hong, J.-H. Bae, K. Kim, S. Lee // Metallurgical and Materials Transactions A. – 2009. – Vol. 40. – P. 2333– 2349. – DOI: 10.1007/s11661-009-9943-9. 28. Relationships among crystallographic texture, fracture behavior and Charpy impact toughness in API X100 pipeline steel / X.-L. Yang, Y.-B. Xu, X.-D. Tan, D. Wu // Materials Science and Engineering A. – 2015. –Vol. 641. – P. 96–106. –DOI: 10.1016/j. msea.2015.06.029. 29. Microstructure of high strength niobiumcontaining pipeline steel / S. Shanmugam, R.D.K. Misra, J. Hartmann, S. Jansto // Materials Science and Engineering: A. – 2006. – Vol. 441 (1–2). – P. 215–229. – DOI: 10.1016/j.msea.2006.08.017. 30. Eff ects of microstructure and pipe forming strain on yield strength before and after spiral pipe forming of API X70 and X80 linepipe steel sheets / S.S. Sohn, S.Y. Han, J.H. Bae, H.S. Kim, S. Lee // Materials Science and Engineering: A. – 2013. – Vol. 573. – P. 18–26. – DOI: 10.1016/j.msea.2013.02.050. 31. Eff ects of microstructure and yield ratio on strain hardening and Bauschinger eff ect in two API X80 linepipe steels / S.Y. Han, S.S. Sohn, S. Shin, J.H. Bae, H.S. Kim, S. Lee // Materials Science and Engineering: A. – 2012. – Vol. 551. – P. 192–199. – DOI: 10.1016/j.msea.2012.05.007. 32. High-strength steel development for pipelines: a Brazilian perspective. / I.S. Bott, L.F.G. De Souza, J.C.G. Teixeira, P.R. Rios // Metallurgical and Materials Transactions A. – 2005. – Vol. 36. – P. 443–454. – DOI: 10.1007/s11661-005-0315-9. 33. Improvement of mechanical properties of heavy plates for high strength linepipe application i.e. in Arctic Regions / F. Grimpe, H. Meuser, F. Gerdemann, E. Muthmann // 2nd International Conference on SuperHigh Strength Steels, Garda, Italy, 17–20 October 2010. – Associazione Italiana di Metallurgia (AIM), 2010. – P. 1–13. 34. Challenges to a pipe manufacturer driven by worldwide pipe projects / H.-G. Hillenbrand, C. Kalwa, J. Schröder, C. Kassel // 18th Joint Technical Meeting on Pipeline Research. – 2011. – Vol. 13. – P. 1–12. 35. Nonn A., Kalwa C. Modelling of damage behaviour of high strength pipeline stell // 18th European Conference on Fracture. – Dresden, 2010. – P. 1–8. 36. Пейганович Н.В. Выпуск нефтегазопроводных труб с повышенной эксплуатационной надежностью // Металлург. – 2007. – № 12. – С. 51–55. 37. Шабалов И.П., Морозов Ю.Д., Эфрон Л.И. Стали для труб и строительных конструкций с повышенными эксплуатационными свойствами. – М.: Металлургиздат, 2003. – 520 с. 38. Ментюков К.Ю. Влияние термомеханической обработки при производстве проката и трубного передела на структуру и механические свойства низколегированных сталей для труб большого диаметра: дис. ... канд. техн. наук: 05.16.01. – М., 2017. – 122 с. 39. A review on casing while drilling technology for oil and gas production with well control model and economical analysis / D. Patel, V. Thakar, S. Pandian, M. Shah, A. Sircar // Petroleum. – 2019. – Vol. 5 (1). – P. 1–12. – DOI: 10.1016/j.petlm.2018.12.003. 40. Using casing to drill directional wells / K.R. Fontenot, B. Lesso, R.D. Strickler, T. Warren // Oilfi eld Review. – 2005. – Vol. 17 (2). – P. 44–61. 41. Simultaneous drill and case technology-case histories, status and options for further development / D. Hahn, W. Van Gestel, N. Fröhlich, G. Stewart // IADC/ SPE Drilling Conference, New Orleans, Louisiana, February 2000. – DOI: 10.2118/59126-MS. 42. Radwan A., Karimi M. Feasibility study of casing drilling application in hpht environments: A review of challenges, benefi ts, and limitations // SPE/IADC Middle East Drilling Technology Conference and Exhibition, Muscat, Oman, October 2011. – DOI: 10.2118/148433-MS. 43. Verhoeven J.D. A review of microsegregation induced banding phenomena in steels // Journal of Materials Engineering and Performance. – 2000. – Vol. 9 (3). – P. 286–296. – DOI: 10.1361/1059949007 70345935. 44. Morrison W.B. Microalloy steels – the beginning // Materials Science and Technology. – 2009. – Vol. 25 (9). – P. 1066–1073. – DOI: 10.1179/ 174328409X453299. 45. Morrison W.B. Infl uence of small niobium additions on properties of carbon-manganese steels // Journal of the Iron and Steel Institute. – 1963. – Vol. 201 (4). – P. 317–325.
RkJQdWJsaXNoZXIy MTk0ODM1