OBRABOTKAMETALLOV Vol. 26 No. 3 2024 48 TECHNOLOGY 25. Liang X. The complex phase transformation of austenite in high strength linepipe steels and its infl uence on the mechanical properties. Diss. University of Pittsburgh, 2012. 26. Kim Y.M., Kim S.K., Lim Y.J., Kim N.J. Eff ect of microstructure on the yield ratio and low temperature toughness of linepipe steels. ISIJ International, 2002, vol. 42 (12), pp. 1571–1577. DOI: 10.2355/isijinternational.42.1571. 27. Shin S.Y., Hong S., Bae J.-H., Kim K., Lee S. Separation phenomenon occurring during the Charpy impact test of API X80 pipeline steels. Metallurgical and Materials Transactions A, 2009, vol. 40, pp. 2333–2349. DOI: 10.1007/ s11661-009-9943-9. 28. Yang X.-L., Xu Y.-B., Tan X.-D., Wu D. Relationships among crystallographic texture, fracture behavior and Charpy impact toughness in API X100 pipeline steel. Materials Science and Engineering: A, 2015, vol. 641, pp. 96– 106. DOI: 10.1016/j.msea.2015.06.029. 29. Shanmugam S., Misra R.D.K., Hartmann J., Jansto S. Microstructure of high strength niobium-containing pipeline steel. Materials Science and Engineering: A, 2006, vol. 441 (1–2), pp. 215–229. DOI: 10.1016/j.msea.2006.08.017. 30. Sohn S.S., Han S.Y., Bae J.H., Kim H.S., Lee S. Eff ects of microstructure and pipe forming strain on yield strength before and after spiral pipe forming of API X70 and X80 linepipe steel sheets. Materials Science and Engineering: A, 2013, vol. 573, pp. 18–26. DOI: 10.1016/j.msea.2013.02.050. 31. Han S.Y., Sohn S.S., Shin S., Bae J.H., Kim H.S., Lee S. Eff ects of microstructure and yield ratio on strain hardening and Bauschinger eff ect in two API X80 linepipe steels. Materials Science and Engineering: A, 2012, vol. 551, pp. 192–199. DOI: 10.1016/j.msea.2012.05.007. 32. Bott I.S., Souza L.F.G. De, Teixeira J.C.G., Rios P.R. High-strength steel development for pipelines: a Brazilian perspective. Metallurgical and Materials Transactions A, 2005, vol. 36, pp. 443–454. DOI: 10.1007/s11661005-0315-9. 33. Grimpe F., Meuser H., Gerdemann F., Muthmann E. Improvement of mechanical properties of heavy plates for high strength pipeline application i.e. in Arctic regions. 2nd International Conference on Super-High Strength Steels, 17–20 October 2010. Associazione Italiana di Metallurgia (AIM), 2010, pp. 1–13. 34. Hillenbrand H.-G., Kalwa C., Schröder J., Kassel C. Challenges to a pipe manufacturer driven by worldwide pipe projects. 18th Joint Technical Meeting on Pipeline Research, 2011, vol. 13, pp. 1–12. 35. Nonn A., Kalwa C. Modelling of damage behaviour of high strength pipeline steel. 18th European Conference on Fracture, Dresden, 2010, pp. 1–8. 36. Peiganovich N.V. Vypusk neftegazoprovodnykh trub s povyshennoi ekspluatatsionnoi nadezhnost’yu [Production of oil-and-gas pipeline tubes and casings with increased operate reliability]. Metallurg = Metallurgist, 2007, № 12, pp. 51–55. (In Russian). 37. Shabalov I.P., Morozov Yu.D., Efron L.I. Stali dlya trub i stroitel’nykh konstruktsii s povyshennymi ekspluatatsionnymi svoistvami [Steels for pipes and building structures with increased performance properties]. Moscow, Metallurgizdat Publ., 2003. 520 p. 38. Mentyukov K.Yu. Vliyanie termomekhanicheskoi obrabotki pri proizvodstve prokata i trubnogo peredela na strukturu i mekhanicheskie svoistva nizkolegirovannykh stalei dlya trub bol’shogo diametra. Diss. dokt. tekhn. nauk [The infl uence of thermomechanical processing in the production of rolled products and pipe processing on the structure and mechanical properties of low-alloy steels for large-diameter pipes. Dr. eng. sci. diss.]. Moscow, 2017. 122 p. 39. Patel D., Thakar V., Pandian S., Shah M., Sircar A. A review on casing while drilling technology for oil and gas production with well control model and economical analysis. Petroleum, 2019, vol. 5 (1), pp. 1–12. DOI: 10.1016/j. petlm.2018.12.003. 40. Fontenot K.R., Lesso B., Strickler R.D., Warren T. Using casing to drill directional wells. Oilfi eld Review, 2005, vol. 17 (2), pp. 44–61. 41. Hahn D., Van Gestel W., Fröhlich N., Stewart G. Simultaneous drill and case technology-case histories, status and options for further development. IADC/SPE Drilling Conference, New Orleans, Louisiana, February 2000. DOI: 10.2118/59126-MS. 42. Radwan A., Karimi M. Feasibility study of casing drilling application in hpht environments: A review of challenges, benefi ts, and limitations. SPE/IADC Middle East Drilling Technology Conference and Exhibition, Muscat, Oman, October 2011. DOI: 10.2118/148433-MS. 43. Verhoeven J.D. A review of microsegregation induced banding phenomena in steels. Journal of Materials Engineering and Performance, 2000, vol. 9 (3), pp. 286–296. DOI: 10.1361/105994900770345935. 44. MorrisonW.B. Microalloy steels – the beginning. Materials Science and Technology, 2009, vol. 25 (9), pp. 1066– 1073. DOI: 10.1179/174328409X453299. 45. Morrison W.B. Infl uence of small niobium additions on properties of carbon-manganese steels. Journal of the Iron and Steel Institute, 1963, vol. 201 (4), pp. 317–325.
RkJQdWJsaXNoZXIy MTk0ODM1