OBRABOTKAMETALLOV Vol. 26 No. 3 2024 technology 73. Suzuki S., Kuroki K., Kobayashi H., Takahashi N. Sn segregation at grain boundary and interface between MnS and matrix in Fe-3 mass% Si alloys doped with tin. Materials Transactions, JIM, 1992, vol. 33 (11), pp. 1068– 1076. DOI: 10.2320/matertrans1989.33.1068. 74. Tsunekage N., Tsubakino H. Effects of sulfur content and sulfide-forming elements addition on impact properties of ferrite-pearlitic microalloyed steels. ISIJ International, 2001, vol. 41 (5), pp. 498–505. DOI: 10.2355/ isijinternational.41.498. 75. Phillips R., Chapman J.A. Influence of finish rolling temperature on mechanical properties of some commercial steels rolled to 13/16 in. diameter bars. Journal of the Iron and Steel Institute, 1966, vol. 204, pp. 615–622. 76. Hiroyoshi M., Osuka T., Kozasu I., Tsukada K. Optimization of metallurgical factors for production of high strength, high toughness steel plate by controlled rolling. Transactions of the Iron and Steel Institute of Japan, 1972, vol. 12, pp. 435–443. 77. Hall E.O. The deformation and ageing of mild steel: III discussion of results. Proceedings of the Physical Society. Section B, 1951, vol. 64 (9), p. 747. DOI: 10.1088/0370-1301/64/9/303. 78. Petch N.J. The cleavage strength of polycrystals. Journal of the Iron and Steel Institute, 1953, vol. 174, pp. 25–28. 79. Armstrong R., Codd I., Douthwaite R.M., Petch N.J. The plastic deformation of polycrystalline aggregates. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, 1962, vol. 7 (73), pp. 45–58. DOI: 10.1080/14786436208201857. 80. Hoogendoorn T.M., Spanraft M.J. Quantifying the effect of microalloy elements on structures during processing. Proceedings. Microalloying ’75, Washington, 1975, pp. 75–89. 81. Villalobos J.C., Del-Pozo A., Campillo B., Mayen J., Serna S. Microalloyed steels through history until 2018: review of chemical composition, processing and hydrogen service. Metals, 2018, vol. 8 (5), p. 351. DOI: 10.3390/ met8050351. 82. Palmiere E.J., Garcia C.I., DeArdo A.J. Compositional and microstructural changes which attend reheating and grain coarsening in steels containing niobium. Metallurgical and Materials Transactions A, 1994, vol. 25, pp. 277–286. DOI: 10.1007/BF02647973. 83. Gauthier G., LeBon A.B. Discussion: on the recrystallization of austenite. Proceedings. Microalloying ’75, Washington, 1975, pp. 1–3. 84. Kozasu I., Ouchi C., Sampei T., Okita T. Hot rolling as a high-temperature thermo-mechanical process. Proceedings. Microalloying ’75, Washington, 1975, pp. 120–134. 85. DeArdo A.J. Microalloyed steels: fifty years of progress – An interpretive review. Available at: https:// www.researchgate.net/publication/304374754_Microalloyed_Steels_Fifty_Years_of_Progress_-_An_Interpretive_ Review (accessed 06.08.2024). 86. Guo F., Wang X., Wang J., Misra R.D.K., Shang C. The significance of central segregation of continuously cast billet on banded microstructure and mechanical properties of section steel. Metals, 2020, vol. 10, p. 76. DOI: 10.3390/ met10010076. 87. Stalheim D.G. The use of high temperature processing (HTP) steel for high strength oil and gas transmission pipeline applications. Iron & Steel, 2005, vol. 40 (11), pp. 699–704. 88. Misra D., Jansto S.G. Niobium-based alloy design for structural applications: processing-structure-property paradigm. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015: conference proceedings. Hoboken, NJ, USA, John Wiley & Sons, Inc., 2015, pp. 261–266. 89. Challa V.S.A., Zhou W.H., Misra R.D.K., O’Malley R., Jansto S.G. The effect of coiling temperature on the microstructure and mechanical properties of a niobium–titanium microalloyed steel processed via thin slab casting. Materials Science and Engineering: A, 2014, vol. 595, pp. 143–153. DOI: 10.1016/j.msea.2013.12.002. 90. Sarmento E.C., Evans J. Effect of strain accumulation and dynamic recrystallisation on the flow stress of HSLA steels during flat rolling. Proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels: ISS-AIME 1992, Warrendale, Pennsylvania, 1992, pp. 105–112. 91. Yada H., Matsumura Y., Senuma T. A new thermomechanical heat treatment for grain refining in low carbon steels. Proceedings of the 1st International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals (THERMEC ‘88), Keidanren Kaikan, Tokyo, Japan, 1988, p. 200. 92. Siciliano F., Rodrigues S.F., Aranas Jr C., Jonas J.J. The dynamic transformation of ferrite above Ae3 and the consequences on hot rolling of steels. Tecnologia em Metalurgia, Materiais e Mineração, 2020, vol. 17 (2), pp. 90–95. DOI: 10.4322/2176-1523.20202230. 93. Tamura I., Sekine H., Tanaka T. Thermomechanical processing of high-strength low-alloy steels. ButterworthHeinemann, 2013. ISBN 0-408-11034-1.
RkJQdWJsaXNoZXIy MTk0ODM1