Assessment of the possibility of resistance butt welding of pipes made of heat-resistant steel 0.15C-5Cr-Mo

OBRABOTKAMETALLOV Vol. 26 No. 3 2024 technology 14. Tukaev R.F., Fairushin A.M., Kuchukov T.M. Sovershenstvovanie tekhnologii izgotovleniya uzla «truba – trubnaya reshetka» kozhukhotrubchatogo teploobmennogo apparata iz zharoprochnoi stali 15Kh5M primeneniem lazernoi svarki [Improving the manufacturing technology of the “pipe – tube sheet” assembly of a shell-and-tube heat exchanger made of heat-resistant steel 15Х5М using laser welding]. Sovremennoe mashinostroenie. Nauka i obrazovanie = Modern mechanical engineering. Science and education, 2013, no. 3, pp. 1179–1185. (In Russian). 15. Tokarev A.S., Karetnikov D.V., Rizvanov R.G., Cherepashkin S.E., Mulikov D.Sh. Otsenka korrozionnoi stoikosti kombinirovannykh soedinenii trub s trubnoi reshetkoi, poluchennykh s primeneniem razlichnykh sposobov svarki [Assessment of the corrosion resistance of combined pipe-tube sheet joints obtained using various welding methods]. Neftegazovoe delo = Oil and Gas Business, 2019, no. 6, pp. 114–133. DOI: 10.17122/ogbus-2019-6-114-133. (In Russian). 16. Shtayger M.G., Balanovskiy A.E., Kargapoltsev S.K., Gozbenko V.E., Karlina A.I., Karlina Yu.I., Govorkov A.S., Kuznetsov B.O. Investigation of macro and micro structures of compounds of high-strength rails implemented by contact butt welding using burning-off. IOP Conference Series: Materials Science and Engineering, 2019, vol. 560 (1), p. 012190. DOI: 10.1088/1757-899X/560/1/012190. 17. Balanovskiy A.E., Shtayger M.G., Karlina A.I., Kargapoltsev S.K., Gozbenko V.E., Karlina Yu.I., Govorkov A.S., Kuznetsov B.O. Surface hardening of structural steel by cathode spot of welding arc. IOP Conference Series: Materials Science and Engineering, 2019, vol. 560 (1), p. 012138. DOI: 10.1088/1757-899X/560/ 1/012138. 18. Balanovskiy A.E., Astafyeva N.A., Kondratyev V.V., Karlina Yu.I. Study of impact strength of C-Mn-Si composition metal after wire-arc additive manufacturing (WAAM). CIS Iron and Steel Review, 2022, vol. 24, pp. 67–73. DOI: 10.17580/cisisr.2022.02.10. 19. Balanovskiy A.E., Karlina A.I., Kolosov A.D., Karlina Y.I. Study of the effect of nanomodifiers from silicon production wastes on morphological form of gray cast iron graphites. CIS Iron and Steel Review, 2021, vol. 21, pp. 64–69. DOI: 10.17580/cisisr.2021.01.11. 20. Fabricius A., Jackson P.S. Premature grade 91 failures – worldwide plant operational experiences. Engineering Failure Analysis, 2016, vol. 66, pp. 398–406. 21. Liu Z., Hu X., Yang Z., Yang B., Chen J., Luo Y., Song M. Optimization study of post-weld heat treatment for 12Cr1MoV pipe welded joint. Metals, 2021, vol. 11 (1), p. 127. DOI: 10.3390/met11010127. 22. Silwal B., Li L., Deceuster A., Griffiths B. Effect of post-weld heat treatment on the toughness of heat-affected zone for grade 91 steel. Welding Journal, 2013, vol. 92 (3), pp. 80s–87s. 23. Chaturvedi M., Vendan Subbiah A., Simion G., Rusu C.C., Scutelnicu E. Critical review on magnetically impelled arc butt welding: challenges, perspectives and industrial applications. Materials, 2023, vol. 16, p. 7054. DOI: 10.3390/ma16217054. 24. Skeeba V.Yu., Ivancivsky V.V., Kutyshkin A.V., Parts K.A. Hybrid processing: the impact of mechanical and surface thermal treatment integration onto the machine parts quality. IOP Conference Series: Materials Science and Engineering, 2016, vol. 126 (1), p. 012016. DOI: 10.1088/1757-899x/126/1/012016. 25. Efremenkov E.A., Martyushev N.V., Skeeba V.Yu., Grechneva M.V., Olisov A.V., Ens A.D. Research on the possibility of lowering the manufacturing accuracy of cycloid transmission wheels with intermediate rolling elements and a free cage. Applied Sciences, 2022, vol. 12 (1), p. 5. DOI: 10.3390/app12010005. 26. Martyushev N.V., Skeeba V.Yu. The method of quantitative automatic metallographic analysis. Journal of Physics: Conference Series, 2017, vol. 803 (1), p. 012094. DOI: 10.1088/1742-6596/803/1/012094. 27. Skeeba V.Yu., IvancivskyV.V. Reliability of quality forecast for hybrid metal-working machinery. IOPConference Series: Earth and Environmental Science, 2018, vol. 194 (2), p. 022037. DOI: 10.1088/1755-1315/194/2/022037. 28. Zverev E.A., Skeeba V.Y., Skeeba P.Y., Khlebova I.V. Defining efficient modes range for plasma spraying coatings. IOP Conference Series: Earth and Environmental Science, 2017, vol. 87 (8), p. 082061. DOI: 10.1088/17551315/87/8/082061. 29. Skeeba V.Yu. Hybrid process equipment: improving the efficiency of the integrated metalworking machines initial designing. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2019, vol. 21, no. 2, pp. 62–83. DOI: 10.17212/1994-6309-2019-21.2-62-83. (In Russian). 30. Borisov M.A., Lobanov D.V., Yanyushkin A.S., Skeeba V.Yu. Investigation of the process of automatic control of current polarity reversal in the conditions of hybrid technology of electrochemical processing of corrosionresistant steels. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2020, vol. 22, no. 1, pp. 6–15. DOI: 10.17212/1994-6309- 2020-22.1-6-15. (In Russian).

RkJQdWJsaXNoZXIy MTk0ODM1