OBRABOTKAMETALLOV technology Vol. 26 No. 3 2024 technological control of machinery at cutting]. Naukoemkie tekhnologii v mashinostroenii = Science Intensive Technologies in Mechanical Engineering, 2018, no. 5 (83), pp. 40–44. DOI: 10.30987/article_5ad8d291cddcd8.06334386. 66. Tugengold A.K., Izyumov A.I. Printsipy kontseptual’nogo podkhoda k sozdaniyu podsistemy Instrument v smart-pasporte mnogooperatsionnogo stanka [Principles of conceptual approach to creating tool subsystem for multioperation machine smart-passport]. Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta = Vestnik of Don State Technical University, 2014, vol. 14 (2), pp. 74–83. DOI: 10.23947/1992-5980-2014-2-74-83. 67. Xiurong Z., Yeu W. Process analysis and parameter optimization of five axis NC machine for machining complex curved surface impellers. 2019 International Conference on Intelligent Transportation, Big Data & Smart City (ICITBS), Changsha, China, 2019, pp. 122–124. DOI: 10.1109/ICITBS.2019.00036. 68. Zakovorotny V.L., Gvindjiliya V.E. Sinergeticheskii podkhod k povysheniyu effektivnosti upravleniya protsessami obrabotki na metallorezhushchikh stankakh [Synergetic approach to improve the efficiency of machining process control on metalcutting machines]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2021, vol. 23, no. 3, pp. 84–99. DOI: 10.17212/1994-6309-2021-23.3-84-99. 69. Kouguchi J., Yoshioka H. Monitoring method of cutting forces and vibrations by using frequency separation of acceleration sensor signals during milling process with small ball end mills. Precision Engineering, 2024, vol. 85, pp. 337–356. DOI: 10.1016/j.precisioneng.2023.10.013. 70. Lu Z., Wang M., Dai W., Sun J. In-process complex machining condition monitoring based on deep forest and process information fusion. The International Journal of Advanced Manufacturing Technology, 2019, vol. 104, pp. 1953–1966. DOI: 10.1007/s00170-019-03919-4. 71. Yao Z., Shen J., Wu M., Zhang D., Luo M. Position-dependent milling process monitoring and surface roughness prediction for complex thin-walled blade component. Mechanical Systems and Signal Processing, 2023, vol. 198, p. 110439. DOI: 10.1016/j.ymssp.2023.110439. 72. Accattatis A., Saggio G., Giannini F. A real time FFT-based impedance meter with bias compensation. Measurement, 2011, vol. 44 (4), pp. 702–707. DOI: 10.1016/j.measurement.2011.01.00. 73. Guo Y., Shi D., Shen X., Ji J., Gan W.-S. A survey on adaptive active noise control algorithms overcoming the output saturation effect. Signal Processing, 2024, vol. 222, p. 109525. DOI: 10.1016/j.sigpro.2024.109525. 74. Chehrehzad M., Kecibas G., Besirova C., Uresin U., Irican M., Lazoglu I. Tool wear prediction through AIassisted digital shadow using industrial edge device. Journal of Manufacturing Processes, 2024, vol. 113, pp. 117– 130. DOI: 10.1016/j.jmapro.2024.01.052. 75. Ponomarev B.B., Nguyen S.H. Vliyanie orientatsii instrumenta na sily rezaniya pri kontsevom frezerovanii [The influence of tool orientation on cutting forces during end milling]. Izvestiya vysshikh uchebnykh zavedenii. Mashinostroenie = Proceedings of Higher Educational Institutions. Маchine Building, 2019, no. 3, pp. 11–20. DOI: 10.18698/0536-1044-2019-3-11-20. 76. GimadeevM.R., LiA.A. Tool conditionmonitoring techniques for milling. Proceedings of the 9th International Conference on Industrial Engineering. ICIE 2023. Cham, Springer, 2023, pp. 698–707. DOI: 10.1007/978-3-03138126-3_69. 77. Gowid S., Dixon R., Ghani S. A novel robust automated FFT-based segmentation and features selection algorithm for acoustic emission condition based monitoring systems. Applied Acoustics, 2015, vol. 88, pp. 66–74. DOI: 10.1016/j.apacoust.2014.08.007. Conflicts of Interest The authors declare no conflict of interest. Claimed contribution of co-authors: Gimadeev M.R. – formulation of the basic concept of the study, conducting experiments, preparing the text of the paper and drawing conclusions, presenting the research results in graphs, searching for analytical materials in domestic and foreign sources, preparing a literature review; Stelmakov V.A. – planning the experiment, conducting experiments, conducting analysis and preparing initial conclusions; Shelenok E.A. – conducting a critical analysis of materials and drawing conclusions, participating in the discussion of the paper materials, analyzing and supplementing the text of the paper. 2024 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1