OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 26 No. 3 2024 using a hardness tester. For ANOVA and regression analysis, the L27 orthogonal array was used according to the Taguchi method. Three parameters were taken as input: weight percentage of red mud, weight percentage of coconut shell ash and indentation load, and hardness was taken as output. As a result of the optimization analysis, it was concluded that the hardness of the composite increases due to an increase in the weight percentage of the reinforcing component and indenter load. According to the response analysis, the weight percentage of red mud has a maximum contribution in the range of 48.80 %, which is superior to the contribution of the weight percentage of coconut ash and the contribution of indentation load. The hardness value shows an error of only 4 % compared to the predicted regression value, and all hardness values falling within the regression equation range show less variability in the residual value. References 1. Verma N., Vettivel S.C. Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite. Journal of Alloys and Compounds, 2018, vol. 741, PP. 981– 998. DOI: 10.1016/j.jallcom.2018.01.185. 2. Bharathi P., Kumar T.S. Mechanical characteristics and wear behaviour of Al/SiC and Al/SiC/B4C hybrid metal matrix composites fabricated through powder metallurgy route. Silicon, 2023, vol. 15 (10), pp. 4259–4275. DOI: 10.1007/s12633-023-02347-0. 3. Sundarababu J., Anandan S.S., Griskevicius P. Evaluation of mechanical properties of biodegradable coconut shell/rice husk powder polymer composites for light weight applications. Materials Today: Proceedings, 2021, vol. 39, pp. 1241–1247. 4. Da Silva E.J., Marques M.L., Velasco F.G., Junior C.F., Luzardo F.M., Tashima M.M. A new treatment for coconut fibers to improve the properties of cement-based composites – Combined effect of natural latex/pozzolanic materials. Sustainable Materials and Technologies, 2017, vol. 12, PP. 44–51. DOI: 10.1016/j.susmat.2017.04.003. 5. Lubis H., Sharman E., Chairina E., Siregar I., Rizky M., Maiya D., Machdhalie T. Fabrication and characterization of adding coconut shell actived nanocarbon to lightweight concrete. Journal of Physics: Conference Series, 2020, vol. 1428 (1), p. 012039. DOI: 10.1088/1742-6596/1428/1/012039. 6. Melnyk L., Myronyuk O., Ratushniy V., Baklan D. The feasibility of using red mud in coatings based on glyptal resins. French-Ukrainian Journal of Chemistry, 2020, vol. 8 (1), pp. 88–94. DOI: 10.17721/fujcV8I1P88-94. 7. Li Z., Zhang J., Li S., Lin C., Gao Y., Liu C. Feasibility of preparing red mud-based cementitious materials: Synergistic utilization of industrial solid waste, waste heat, and tail gas. Journal of Cleaner Production, 2021, vol. 285, p. 124896. DOI: 10.1016/j.jclepro.2020.124896. 8. Kang S.P., Kwon S.J. Effects of red mud and alkali-activated slag cement on efflorescence in cement mortar. Construction and Building Materials, 2017, vol. 133, pp. 459–467. DOI: 10.1016/j.conbuildmat.2016.12.123. 9. Scribot C., Maherzi W., Benzerzour M., Mamindy-Pajany Y., Abriak N.E. A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production. Construction and Building Materials, 2018, vol. 163, pp. 21–31. DOI: 10.1016/j.conbuildmat.2017.12.092. 10. Peng Y., Luo L., Luo S., Peng K., Zhou Y., Mao Q., Yang Y. Efficient removal of antimony (III) in aqueous phase by nano-Fe3O4 modified high-iron red mud: study on its performance and mechanism. Water, 2021, vol. 13 (6), p. 809. DOI: 10.3390/w13060809. 11. Sharma R., Pradhan M.K., Jain P. Fabrication, characterization and optimal selection of aluminium alloy 8011 composites reinforced with B4C-aloe vera ash. Materials Research Express, 2023, vol. 10 (11), p. 116513. DOI: 10.1088/2053-1591/acec32. 12. Kumar L.J., Ganjigatti J.P., Irfan G., Thara R. Optimizing wear performance: comprehensive analysis of aluminium 6061 metal matrix composites reinforced with coconut shell ash and graphene. Journal of The Institution of Engineers (India): Series D, 2024, pp. 1–17. DOI: 10.1007/s40033-023-00630-3. 13. Kumar A., Singh R.C., Chaudhary R. Investigation of nano-Al2O3 and micro-coconut shell ash (CSA) reinforced AA7075 hybrid metal–matrix composite using two-stage stir casting. Arabian Journal for Science and Engineering, 2022, vol. 47 (12), pp. 15559–15573. DOI: 10.1007/s13369-022-06728-2. 14. Chandla N.K., Yashpal, Kant S., Goud M.M., Jawalkar C.S. Experimental analysis and mechanical characterization of Al 6061/alumina/bagasse ash hybrid reinforced metal matrix composite using vacuumassisted stir casting method. Journal of Composite Materials, 2020, vol. 54 (27), pp. 4283–4297. DOI: 10.1177/0021998320929417.
RkJQdWJsaXNoZXIy MTk0ODM1