OBRABOTKAMETALLOV Vol. 26 No. 3 2024 296 MATERIAL SCIENCE References 1. Bochenek K., Basista M. Advances in processing of NiAl intermetallic alloys and composites for high temperature aerospace applications. Progress in Aerospace Sciences, 2015, vol. 79, pp. 136–146. DOI: 10.1016/j.paerosci.2015.09.003. 2. Müller M., Enghardt S., Kuczyk M., Riede M., López E., Brueckner F., Marquardt A., Leyens C. Microstructure of NiAl-Ta-Cr in situ alloyed by induction-assisted laser-based directed energy deposition. Materials & Design, 2024, vol. 238, p. 112667. DOI: 10.1016/j.matdes.2024.112667. 3. Zhou L., Mehta A., Cho K., Sohn Y. Composition-dependent interdiff usion coeffi cient, reduced elastic modulus and hardness in γ-, γ′- and β-phases in the Ni-Al system. Journal of Alloys and Compounds, 2017, vol. 727, pp. 153–162. DOI: 10.1016/j.jallcom.2017.07.256. 4. Darolia R. Ductility and fracture toughness issues related to implementation of NiAl for gas turbine applications. Intermetallics, 2000, vol. 8 (9–11), pp. 1321–1327. DOI: 10.1016/S0966-9795(00)00081-9. 5. Li Y., Li C., Wu J., Wu Y., Ma Z., Yu L., Li H., Liu Y. Formation of multiply twinned martensite plates in rapidly solidifi ed Ni3Al-based superalloys. Materials Letters, 2019, vol. 250, pp. 147–150. DOI: 10.1016/j. matlet.2019.05.012. 6. Wang J., Qian J., Zhang X., Wang Y. Research status and progress of NiAl based alloys as high temperature structural materials. Rare Metals, 2011, vol. 30, pp. 422–426. DOI: 10.1007/s12598-011-0317-2. 7. Abuwarda N., Lopez A.J., Lopez M.D., Utrilla M.V. High temperature corrosion and wear behavior of HVOFsprayed coating of Al2O3-NiAl on AISI 304 stainless steel. Surface and Coating Technology, 2019, vol. 359, pp. 35– 46. DOI: 10.1016/j.surfcoat.2018.12.047. 8. Chi H., Pans M.A., Bai M., Sun C., Hussain T., Sun W., Yao Y., Lyu J., Liu H. Experimental investigations on the chlorine-induced corrosion of HVOF thermal sprayed Stellite-6 and NiAl coatings with fl uidised bed biomass/ anthracite combustion systems. Fuel, 2021, vol. 288, p. 119607. DOI: 10.1016/j.fuel.2020.119607. 9. Sadeghimeresht E., Markocsan N., Nylén P. A comparative study on Ni-based coatings prepared by HVAF, HVOF, and APS methods for corrosion protection applications. Journal of Thermal Spray Technology, 2016, vol. 25, pp. 1604–1616. DOI: 10.1007/s11666-016-0474-9. 10. Sadeghimeresht E., Markocsan N., Nylén P. Microstructural and electrochemical characterization of Ni-based bi-layer coatings produced by the HVAF process. Surface and Coating Technology, 2016, vol. 304, pp. 606–619. DOI: 10.1016/j.surfcoat.2016.07.080. 11. Mehmood K., Rafi q M.A., Durrani Y.A., KhanA.N. Eff ect of isothermal treatment on Ni3Al coatings deposited by air plasma spraying system. Archives of Metallurgy Materials, 2018, vol. 63, pp. 277–283. DOI: 10.24425/118938. 12. Zhang L., Wang D., Liao X.-J., Chen R., Luo X.-T., Li C.-J. Study on the oxidation resistance mechanism of self-healable NiAl coating deposited by atmospheric plasma spraying. Materials Degradation, 2023, vol. 7, p. 62. DOI: 10.1038/s41529-023-00383-0. 13. Poliarus O., Morgiel J., Umanskyi O., PomorskaM., Bobrowski P., SzczerbaM.J., Kostenko O. Microstructure and wear of thermal sprayed composite NiAl-based coatings. Archives of Civil and Mechanicals Engineering, 2019, vol. 19, pp. 1095–1103. DOI: 10.1016/j.acme.2019.06.002. 14. Mirche K.K., Pandey K.K., Pandey S.M., Keshri A.K. Microstructure and corrosion behavior of plasmasprayed nanodiamond-reinforced NiAl nanocomposite coating. Journal of Thermal Spray Technology, 2023, vol. 32, pp. 1299–1310. DOI: 10.1007/s11666-023-01558-6. 15. Saltykov P., Cornish L., Cacciamani G. Al-Ni binary phase diagram evaluation. MSI Eureka. Ed. by G. Eff enberg. MSI, 2004. Available at: https://materials.springer.com/msi/docs/sm_msi_r_20_010238_01 (accessed 21.08.2024). 16. Kositsyn S.V., Kositsyna I.I. Fazovye i strukturnye prevrashcheniya v splavakh na osnove monoalyuminida nikelya [Phase and structural transformations in the alloys based onmonoaluminide of nikel]. Uspekhi fi ziki metallov = Progress in Physics of Metals, 2008, vol. 9 (2), pp. 195–258. DOI: 10.15407/ufm.09.02.195. 17. Potapov P.L., Ochin P., Pons J., Schryvers D. Nanoscale inhomogeneities in melt-spun Ni-Al. Acta Materialia, 2000, vol. 48, pp. 3833–3845. DOI: 10.1016/S1359-6454(00)00188-9. 18. Potapov P.L., Song S.Y., Udovenko V.A., Prokoshkin S.D. X-ray study of phase transformations in martensitic Ni-Al alloys. Metallurgical and Materials Transactions A, 1997, vol. 28A, pp. 1133–1142. DOI: 10.1007/s11661997-0279-z. 19. Schryvers D., Boullay P., Potapov P.L., Kohn R.V., Ball J.M. Microstructures and interfaces in Ni-Al martensite: comparing HRTEM observations with continuum theories. International Journal of Solids and Structures, 2002, vol. 39, pp. 3543–3554. DOI: 10.1016/S0020-7683(02)00167-1.
RkJQdWJsaXNoZXIy MTk0ODM1