OBRABOTKAMETALLOV TECHNOLOGY Vol. 26 No. 4 2024 9. Nabhan A., Sherif G., Abouzeid R., Taha M. Mechanical and tribological performance of HDPE matrix reinforced by hybrid Gr/TiO2 NPs for hip joint replacement. Journal of Functional Biomaterials, 2023, vol. 14 (3), p. 140. DOI: 10.3390/jfb14030140. 10. Zhang X., Zhang T., Chen K., Xu H., Feng C., Zhang D. Wear mechanism and debris analysis of PEEK as an alternative to CoCrMo in the femoral component of total knee replacement. Friction, 2023, vol. 11, pp. 1845–1861. DOI: 10.1007/s40544-022-0700-z. 11. Tol M.C.J.M., Willigenburg N.W., Rasker A.J., Willems H.C., Gosens T., Heetveld M., Schotanus M.G.M., Eggen B., Kormos M., Pas S.L. van der, Vaart A. van der, Goslings J.C., Poolman R.W. Posterolateral or direct lateral surgical approach for hemiarthroplasty after a hip fracture: a randomized clinical trial alongside a natural experiment. JAMA Network Open, 2024, vol. 7 (1), p. e2350765. DOI: 10.1001/jamanetworkopen.2023.50765. 12. Obinna O., Stachurek I., Kandasubramanian B., Njuguna J. 3D printing for hip implant applications: a review. Polymers (Basel), 2020, vol. 12 (11), p. 2682. DOI: 10.3390/polym12112682. 13. Bhagia S., Bornani K., Agarwal R., Satlewal A., Ďurkovič J., Lagaňa R., Bhagia M., Yoo C.G., Zhao X., Kunc V., Pu Y., Ozcan S., Ragauskas A.J. Critical review of FDM 3D printing of PLA biocomposites fi lled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefi neries. AppliedMaterials Today, 2021, vol. 24, p. 101078. DOI: 10.1016/j.apmt.2021.101078. 14. Anerao P., Kulkarni A., Munde Y., Shinde A., Das O. Biochar reinforced PLA composite for fused deposition modelling (FDM): a parametric study on mechanical performance. Composites, Part C: Open Access, 2023, vol. 12, p. 100406. DOI: 10.1016/j.jcomc.2023.100406. 15. Gosavi A., Kulkarni A., Dama Y., Deshpande A., Jogi B. Comparative analysis of drop impact resistance for diff erent polymer based materials used for hearing aid casing. Materials Today: Proceedings, 2022, vol. 49, pp. 2433–2441. DOI: 10.1016/j.matpr.2021.09.519. 16. Dama Y.B., Jogi B.F., Pawade R.S. Application of nonlinear analysis in evaluating additive manufacturing process for engineering design features: a study and recommendations. Communications on Applied Nonlinear Analysis, 2024, vol. 31 (1s), pp. 94–105. DOI: 10.52783/cana.v31.559. 17. Daly M., Tarfaoui M., Chihi M., Bouraoui C. FDM technology and the eff ect of printing parameters on the tensile strength of ABS parts. The International Journal of Advanced Manufacturing Technology, 2023, vol. 126 (11– 12), pp. 5307–5323. DOI: 10.1007/s00170-023-11486-y. 18. Sandanamsamy L., Mogan J., Rajan K., HarunW.S.W., Ishak I., Romlay F.R.M., Samykano M., Kadirgama K. Eff ect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings, 2023. DOI: 10.1016/j.matpr.2023.03.217. 19. Eryildiz M. Eff ect of build orientation on mechanical behaviour and build time of FDM 3D-printed PLA parts: an experimental investigation. European Mechanical Science, 2021, vol. 5 (3), pp. 116–120. DOI: 10.26701/ ems.881254. 20. Chacón J.M., Caminero M.A., García-Plaza E., Núñez P.J. Additive manufacturing of PLA structures using fused deposition modelling: eff ect of process parameters on mechanical properties and their optimal selection. Materials & Design, 2017, vol. 124, pp. 143–157. DOI: 10.1016/j.matdes.2017.03.065. 21. Kharate N., Anerao P., Kulkarni A., Abdullah M. Explainable AI techniques for comprehensive analysis of the relationship between process parameters and material properties in FDM-based 3D-printed biocomposites. Journal of Manufacturing and Materials Processing, 2024, vol. 8 (4), p. 171. DOI: 10.3390/jmmp8040171. 22. Paturkar A., Mache A., Deshpande A., Kulkarni A. Experimental investigation of dry sliding wear behaviour of jute/epoxy and jute/glass/epoxy hybrids using Taguchi approach. Materials Today: Proceedings, 2018, vol. 5 (11), pp. 23974–23983. DOI: 10.1016/j.matpr.2018.10.190. 23. Satkar A.R., Mache A., Kulkarni A. Numerical investigation on perforation resistance of glass-carbon/epoxy hybrid composite laminate under ballistic impact. Materials Today: Proceedings, 2022, vol. 59 (1), pp. 734–741. DOI: 10.1016/j.matpr.2021.12.464. 24. Kanitkar Y.M., Kulkarni A.P., Wangikar K.S. Investigation of fl exural properties of glass-Kevlar hybrid composite. European Journal of Engineering and Technology Research, 2018, vol. 1, pp. 25–29. DOI: 10.24018/ ejeng.2016.1.1.90. 25. Virpe K., Deshpande A., Kulkarni A. A review on tribological behavior of polymer composite impregnated with carbon fi llers. AIP Conference Proceedings, 2020, vol. 2311 (1), p. 070030. DOI: 10.1063/5.0035408. 26. Chinchanikar S. Modeling of sliding wear characteristics of Polytetrafl uoroethylene (PTFE) composite reinforced with carbon fi ber against SS304. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2022, vol. 24, no. 3, pp. 40–52. DOI: 10.17212/1994-6309-2022-24.3-40-52.
RkJQdWJsaXNoZXIy MTk0ODM1