OBRABOTKAMETALLOV Vol. 26 No. 4 2024 TECHNOLOGY 16. Kulkarni P., Chinchanikar S. A review on machining of nickel-based superalloys using nanofl uids under minimum quantity lubrication (NFMQL). Journal of the Institution of Engineers (India): Series C, 2023, vol. 104 (1), pp. 183–199. DOI: 10.1007/s40032-022-00905-w. 17. Kulkarni P., Chinchanikar S. Modeling turning performance of Inconel 718 with hybrid nanofl uid under MQL using ANN and ANFIS. Frattura ed Integrità Strutturale, 2024, vol. 18 (70), pp. 71–90. DOI: 10.1080/2374068X.2 024.2307103. 18. Kulkarni P., Chinchanikar S. Machining eff ects and multi-objective optimization in Inconel 718 turning with unitary and hybrid nanofl uids under MQL. Frattura ed Integrità Strutturale, 2024, vol. 18 (68), pp. 222–241. DOI: 10.3221/IGF-ESIS.68.15. 19. Kulkarni P., Chinchanikar S. Machinability of Inconel 718 using unitary and hybrid nanofl uids under minimum quantity lubrication. Advances in Materials and Processing Technologies, 2024, pp. 1–29. DOI: 10.1080/2374068X .2024.2307103. 20. Dwivedi R., Somatkar A., Chinchanikar S. Modeling and optimization of roller burnishing of Al6061-T6 process for minimum surface roughness, better microhardness and roundness. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 3, pp. 52–65. DOI: 10.17212/1994-6309-2024-26.3-52-65. 21. Chinchanikar S., Gadge M.G. Performance modeling and multi-objective optimization during turning AISI 304 stainless steel using coated and coated-microblasted tools. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2023, vol. 25, no. 4, pp. 117–135. DOI: 10.17212/1994-63092023-25.4-117-135. (In Russian). 22. Chinchanikar S., Choudhury S.K. Eff ect of work material hardness and cutting parameters on performance of coated carbide tool when turning hardened steel: an optimization approach. Measurement, 2013, vol. 46 (4), pp. 1572–1584. DOI: 10.1016/j.measurement.2012.11.032. 23. Gaikwad V.S., Chinchanikar S. Mechanical behaviour of friction stir weldedAA7075-T651 joints considering the eff ect of tool geometry and process parameters. Advances in Materials and Processing Technologies, 2022, vol. 8 (4), pp. 3730–3748. DOI: 10.1080/2374068X.2021.1976554. Confl icts of Interest The authors declare no confl ict of interest. © 2024 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1