OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 26 No. 4 2024 9. Boychuk I.P., Grinek A.V., Tynchenko V.S., Kukartsev V.A., Tynchenko Y.A., Kondratiev S.I. Amethodological approach to the simulation of a ship’s electric power system. Energies, 2023, vol. 16, p. 8101. DOI: 10.3390/ en16248101. 10. Klevtsov G.V., Perlovich Yu.A., Fesenko V.A. K razvitiyu rentgenovskogo metoda identifi katsii izlomov s isporchennoi poverkhnost’yu [Towards the development of an X-ray method for identifying fractures with a damaged surface]. Zavodskaya laboratoriya = Industrial Laboratory, 1993, vol. 59, no. 8, pp. 34–37. 11. Brandon D., Kaplan W.D. Microstructural characterization of materials. Chichester, New York, J. Wiley, 1999 (Russ. ed.: Brandon D., Kaplan U. Mikrostruktura materialov. Metody issledovaniya i kontrolya. Moscow, Tekhnosfera Publ., 2004. 384 p. ISBN 5-94836-018-0). 12. Vidayev I.G., Martyushev N., Ivashutenko A.S., Bogdan A.M. The resource effi ciency assessment technique for the foundry production. Advanced Materials Research, 2014, vol. 880, pp. 141–145. DOI: 10.4028/www.scientifi c.net/AMR.880.141. 13. Syusyuka E.N., Savchenko M.M. Difraktometricheskie metody analiza sudovykh tekhnicheskikh sredstv [Diff ractometric methods of analysis of ship technical means]. Ekspluatatsiya morskogo transporta = Operation of marine transport, 2021, no. 4 (101), pp. 148–151. DOI: 10.34046/aumsuomt101/22. 14. Syusyuka E.N. Possibility of applying X-ray methods to control the surface quality of a shaft line after fi nishing. Journal of Physics: Conference Series, 2021, vol. 2061, p. 012022. DOI: 10.1088/1742-6596/2061/1/012022. 15. Gutschin N.S., Kovalevich E.V., Petrov L.A., Pestov E.S. Novyi metod izgotovleniya rabochikh organov pogruzhnykh tsentrobezhnykh nasosov iz austenitnogo chuguna s sharovidnym grafi tom [The new method of operating element production of the sinking rotary pumps made of austenitic iron with spherical graphite]. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova = Vestnik of Nosov Magnitogorsk state technical university, 2008, no. 4 (24), pp. 44–48. 16. Sitdikov V.D., NikolaevA.A., Ivanov G.V., MakatrovA.K., MalininA.V. Microstructure and crystallographic structure of ferrate steel subject to stress corrosion cracking. Pis’ma o materialakh = Letters on materials, 2022, vol. 12 (1), pp. 65–70. DOI: 10.22226/2410-3535-2022-1-65-70. 17. Kniaziuk T.V., Zisman A.A. Abnormal eff ect of strain rate on dynamic recrystallization of austenite in medium carbon steel alloyed by boron. Pis’ma o materialakh = Letters on materials, 2022, vol. 12 (1), pp. 71–75. DOI: 10.22226/2410-3535-2022-1-71-75. 18. Merson E.D., Poluyanov V.A., Myagkih P.N., Merson D.L., Vinogradov A.Yu. Vliyanie napryazhenno-deformirovannogo sostoyaniya na put’ rasprostraneniya treshchin kvaziskola v nizkouglerodistoi stali, okhrupchennoi vodorodom [Eff ect of the stress-strain state on the path of quasi-cleavage hydrogen-assisted cracking in low-carbon steel]. Pis’ma o materialakh = Letters on materials, 2021, vol. 11 (3), pp. 298–303. DOI: 10.22226/2410-3535-20213-298-303. 19. Okhapkin K.A., Kudryavtsev A.S. Issledovanie vliyaniya dlitel’noi vysokotemperaturnoi ekspluatatsii na strukturu i svoistva austenitnoi khromonikel’molibdenovoi stali [Study of the infl uence of long-term high-temperature operation on the structure and properties of austenitic chromium-nickel-molybdenum steel]. Pis’ma o materialakh = Letters on materials, 2022, vol. 12 (1), pp. 21–26. DOI: 10.22226/2410-3535-2022-1-21-26. 20. Okolovich G.A., Karpov S.V., Lareshcheva O.S. Novye tekhnologii v proizvodstve stal’nykh porshnevykh kolets [New technologies in the production of steel piston rings]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2004, no. 2 (23), pp. 27–28. 21. Okolovich G.A., Guriev A.M., Shabalin V.N., Sizova A.E. Tekhnologiya naneseniya iznosostoikogo pokrytiya stal’nykh porshnevykh kolets [Technology for deposition of wear-resistant coating of piston rings]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2012, no. 4 (57), pp. 50–52. 22. Nekrasova T.V., MelnikovA.G. Creation of ceramic nanocomposite material on the basis of ZrO2-Y2O3-Al2O3 with improved operational properties of the working surface. Applied Mechanics and Materials, 2013, vol. 379, pp. 77–81. DOI: 10.4028/www.scientifi c.net/AMM.379.77. 23. Strateichuk D.M., Martyushev N.V., Klyuev R.V., Gladkikh V.A., Kukartsev V.V., Tynchenko Y.A., Karlina A.I. Morphological features of polycrystalline CdS1−xSex fi lms obtained by screen-printing method. Crystals, 2023, vol. 13, p. 825. DOI: 10.3390/cryst13050825. 24. Vasiliev D.M., Smirnov B.I. Nekotorye rentgenografi cheskie metody izucheniya plasticheski deformirovannykh metallov [Certain X-ray diff raction methods of investigating cold worked metals]. Uspekhi fi zicheskikh nauk = Soviet Physics Uspekhi, 1961, vol. 73 (3), pp. 503–558. (In Russian).
RkJQdWJsaXNoZXIy MTk0ODM1