ОБРАБОТКА МЕТАЛЛОВ Том 27 № 1 2025 214 МАТЕРИАЛОВЕДЕНИЕ against steel counterface // Tribology International. – 2004. – Vol. 37 (9). – P. 727–732. – DOI: 10.1016/j.triboint.2004.03.002. 11. Eff ect of bentonite clay and polypropylene matrix on the properties of silk and glass fi ber-reinforced hybrid composites / Md R.H. Mazumder, F. Numera, A. AlAsif, M. Hasan // Journal of Thermoplastic Composite Materials. – 2021. – Vol. 34 (12). – P. 1654–1665. – DOI: 10.1177/0892705719878231. 12. Mechanical and tribological properties of PA66/ PPS blend. II. Filled with PTFE / Z. Chen, X. Liu, T. Li, R. Lü // Journal of Applied Polymer Science. – 2006. – Vol. 101 (2). – P. 969–977. – DOI: 10.1002/app.22061. – DOI: 10.1002/app.22061. 13. Infl uence of twin-screw elements on the dispersion of nano-clay in vinyl ester polymer composites using Taguchi’s orthogonal array technique / R.G. Raj, G.G. Tanuja, C.L. Kumar, N.A.P. Nittala, M.K. Srinath, S.S. Abdullaev, D. Bandhu // International Journal on Interactive Design and Manufacturing (IJIDeM). – 2024. – Vol. 18 (5). – P. 3271–3285. – DOI: 10.1007/s12008023-01492-5. 14. Dama Y.B., Jogi B.F., Pawade R.S. Application of nonlinear analysis in evaluating additive manufacturing processes for engineering design features: a study and recommendations // Communications on Applied Nonlinear Analysis. – 2024. – Vol. 31 (1s). – DOI: 10.52783/ cana.v31.559. 15. Comparative analysis of drop impact resistance for diff erent polymer-based materials used for hearing aid casing / A. Gosavi, A. Kulkarni, Y. Dama, A. Deshpande, B. Jogi // Materials Today: Proceedings. – 2022. – Vol. 49. – P. 2433–2441. – DOI: 10.1016/j.matpr.2021.09.519. 16. Virpe K., Deshpande A., Kulkarni A. A review on tribological behavior of polymer composite impregnated with carbon fi llers // AIP Conference Proceedings. – 2020. – Vol. 2311 (1). – DOI: 10.1063/5.0035408. 17. Experimental investigation of dry sliding wear behavior of jute/epoxy and jute/glass/epoxy hybrids using Taguchi approach / A. Paturkar, A. Mache, A. Deshpande, A. Kulkarni // Materials Today: Proceedings. – 2018. – Vol. 5 (11). – P. 23974–23983. – DOI: 10.1016/j. matpr.2018.10.190. 18. Satkar A.R., Mache A., Kulkarni A. Numerical investigation on perforation resistance of glass-carbon/epoxy hybrid composite laminate under ballistic impact // Materials Today: Proceedings. – 2022. – Vol. 59 (1). – P. 734–741. – DOI: 10.1016/j.matpr.2021.12.464. 19. Чинчаникар С. Моделирование характеристик износа при скольжении композиционного материала на основе политетрафторэтилена (ПТФЭ), армированного углеродным волокном, в паре трения с SS304 (12Х18Н10Т) // Обработка металлов (технология, оборудование, инструменты). – 2022. – Т. 24, № 3. – С. 40–52. – DOI: 10.17212/1994-6309-202224.3-40-52. 20. Kanitkar Y.M., Kulkarni A.P., Wangikar K.S. Investigation of fl exural properties of glass-Kevlar hybrid composite // European Journal of Engineering and Technology Research. – 2018. – Vol. 1. – P. 25–29. – DOI: 10.24018/ejeng.2016.1.1.90. Конфликт интересов Авторы заявляют об отсутствии конфликта интересов. © 2025 Авторы. Издательство Новосибирского государственного технического университета. Эта статья доступна по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная (https://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1