OBRABOTKAMETALLOV technology Vol. 27 No. 2 2025 14. Cai D., Chen J., Mao X., Hao C. Reheat cracking in Ti2AlNb alloy resistance spot weldments. Intermetallics, 2013, vol. 38, pp. 63–69. DOI: 10.1016/j.intermet.2013.02.013. 15. Li Y., Zhao Y., Li Q., Wu A., Zhu R., Wang G. Effects of welding condition on weld shape and distortion in electron beam welded Ti2AlNb alloy joints. Materials & Design, 2017, vol. 114, pp. 226–233. DOI: 10.1016/j. matdes.2016.11.083. 16. Shao L., Cui E. Joining of Ti-22Al-25Nb alloy using different welding methods. Materials China, 2019, vol. 38 (3), pp. 286–290. DOI: 10.7502/j.issn.1674-3962.2019.03.11. 17. PanovD., Naumov S., StepanovN., SokolovskyV., Volokitina E., KashaevN., VentzkeV., Dinse R., Riekehr S., Povolyaeva E., Nochovnaya N., Alekseev E., Zherebtsov S., Salishchev G. Effect of pre-heating and post-weld heat treatment on structure and mechanical properties of laser beam-welded Ti2AlNb-based joints. Intermetallics, 2022, vol. 143, p. 107466. DOI: 10.1016/j.intermet.2022.107466. 18. Zou J., Li H. Review on weldability of Ti2AlNb-based alloy. Materials China, 2019, vol. 38 (7), pp. 710–716. DOI: 10.7502/j.issn.1674-3962.201803012. 19. Liu X., Wu S., Ji Y., Shao L., Zhao H., Wan X. Ultrasonic frequency pulse tungsten inert gas welding of Ti2AlNb-based alloy. Xiyou Jinshu / Chinese Journal of Rare Metals, 2014, vol. 38 (4), pp. 541–547. DOI: 10.13373/j. cnki.cjrm.2014.04.001. 20. Lu B., Yin J., Wang Y., Yang R. Gas tungsten arc welding of Ti2AlNb based alloy sheet. Ti-2011: Proceedings of the 12th World Conference on Titanium. Beijing, 2012, vol. 1, pp. 816–818. 21. Kuang Y., Hu J., Su W., Zhu Z., Liao H., Wang Z. Elimination of pores and microstructural characterization in Ti-6Al-4V alloy welds using fast-frequency double pulse TIG welding. Materials Today Communications, 2024, vol. 41, p. 110516. DOI: 10.1016/j.mtcomm.2024.110516. 22. Wang Z., Jiang D., Wu J., Xu M. A review on high-frequency pulsed arc welding. Journal of Manufacturing Processes, 2020, vol. 60, pp. 503–519. DOI: 10.1016/j.jmapro.2020.10.054. 23. Karpagaraj A., Siva shanmugam N., Sankaranarayanasamy K. Some studies on mechanical properties and microstructural characterization of automated TIG welding of thin commercially pure titanium sheets. Materials Science and Engineering: A, 2015, vol. 640, pp. 180–189. DOI: 10.1016/j.msea.2015.05.056. 24. Naumov S.V., Panov D.O., Chernichenko R.S., Sokolovsky V.S., Volokitina E.I., Stepanov N.D., Zherebtsov S.V., Alekseev Е.B., Nochovnaya N.A., Salishchev G.A. Structure and mechanical properties of welded joints from alloy based on VTI-4 orthorhombic titanium aluminide produced by pulse laser welding. Izvestiya. NonFerrous Metallurgy, 2023, vol. 29 (2), pp. 57–73. DOI: 10.17073/0021-3438-2023-2-57-73. 25. KuangY., Jia J., Zhu Z., Gui Z., Tian J., Wang Z. Study on arc shape, weldment microstructure, and mechanical properties of Ti-6Al-4V welded by FFDP TIG waveform. The International Journal of Advanced Manufacturing Technology, 2024, vol. 130, pp. 5269–5284. DOI: 10.1007/s00170-024-13067-z. Conflicts of Interest The authors declare no conflict of interest. 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1