OBRABOTKAMETALLOV MATERIAL SCIENCE Том 23 № 3 2021 EQUIPMEN . INSTRUM TS Vol. 7 No. 2 2025 15. Katna R., Suhai M., Agrawal N. Nonedible vegetable oil-based cutting fluids for machining processes – a review. Materials and Manufacturing Processes, 2020, vol. 35 (1), pp. 1–32. DOI: 10.1080/10426914.2019. 1697446. 16. Khanna N., Shah P., Chetan. Comparative analysis of dry, flood, MQL and cryogenic CO2 techniques during the machining of 15-5-PH SS alloy. Tribology International, 2020, vol. 146, p. 106196. DOI: 10.1016/j. triboint.2020.106196. 17. Kishawy H.A., Hosseini A. Environmentally conscious machining. Machining Difficult-to-Cut Materials. Springer, 2019, pp. 205–238. DOI: 10.1007/978-3-319-95966-5_7. 18. Ku W.L., Hun C.L., Lee S.M., Chow H.M. Optimization in thermal friction drilling for SUS 304 stainless steel. International Journal of Advanced Manufacturing Technology, 2011, vol. 53, pp. 935–944. DOI: 10.1007/ s00170-010-2899-5. 19. Lemieux S., Elomari S., Nemes J.A., Skibo M.D. Thermal expansion of isotropic Duralcan meta–matrix composites. Journal of Materials Science, 1998, vol. 33, pp. 4381–4387. DOI: 10.1023/A:1004437032224. 20. Vijayaraghavan L. Machining of composites an overview. International Journal on Design andManufacturing Technologies, 2007, vol. 1 (1), pp. 16–23. DOI: 10.18000/ijodam.70004. 21. Manna A., Bhattacharayya B. A study on machinability of Al/SiC-MMC. Journal of Materials Processing Technology, 2003, vol. 140 (1–3), pp. 711–716. DOI: 10.1016/S0924-0136(03)00905-1. 22. Sodavadia K.P., Makwana A.H. Experimental investigation on the performance of coconut oil based nano fluid as lubricants during turning of AISI 304 austenitic stainless steel. International Journal of Advanced Mechanical Engineering, 2014, vol. 4 (1), pp. 55–60. 23. Muthuvel S., Naresh Babu M., Muthukrishnan N. Copper nanofluids under minimum quantity lubrication during drilling of AISI 4140 steel. Australian Journal of Mechanical Engineering, 2020, vol. 18 (suppl. 1), pp. S151– S164. DOI: 10.1080/14484846.2018.1486694. 24. Patil N.G., Brahmankar P.K. Determination of material removal rate in wire electro-discharge machining of metal matrix composites using dimensional analysis. International Journal of Advanced Manufacturing Technology, 2010, vol. 51, pp. 599–610. DOI: 10.1007/s00170-010-2633-3. 25. Ralph B., Yuen H.C., Lee W.B. The processing of metal matrix composites – an overview. Journal of Materials Processing Technology, 1997, vol. 63 (1–3), pp. 339–353. DOI: 10.1016/S0924-0136(96)02645-3. 26. Ramnath B.V., Elanchezhian C., Annamalai R.M., Aravind S., Sri T., Atreya A., Vignes V., Subramanian C. Aluminium metal matrix composites – a review. Reviews on Advanced Materials Science, 2014, vol. 38, pp. 55–60. 27. Kulkarni A., Ambhore N., Deshpande A., Anerao P., Chinchanikar S. Analysis of cutting temperature during turning of SS 304 using uncoated and PVD coated carbide inserts. Materials Today: Proceedings, 2022, vol. 68 (6), pp. 2569–2573. DOI: 10.1016/j.matpr.2022.09.417. 28. Dama Y., Jogi B., Pawade R., Kulkarni A. Vliyanie napravleniya pechati na kharakter iznosa PLAbiomateriala, poluchennogo metodom FDM: issledovanie dlya implantata tazobedrennogo sustava [Impact of print orientation on wear behavior in FDM printed PLA Biomaterial: study for hip-joint implant]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 4, pp. 19–40. DOI: 10.17212/1994-6309-2024-26.4-19-40. 29. Pawade R.S., Joshi S.S. Multi-objective optimization of surface roughness and cutting forces in high-speed turning of Inconel 718 using Taguchi grey relational analysis (TGRA). The International Journal of Advanced Manufacturing Technology, 2011, vol. 56 (1–4), pp. 57–62. DOI: 10.1007/s00170-011-3183-z. 30. Chinchanikar S. Modelirovanie kharakteristik iznosa pri skol’zhenii kompozitsionnogo materiala na osnove politetraftoretilena (PTFE), armirovannogo uglerodnym voloknom, v pare treniya s SS304 (12Kh18N10T) [Modeling of sliding wear characteristics of Polytetrafluoroethylene (PTFE) composite reinforced with carbon fiber against SS304]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2022, vol. 24, no. 3, pp. 40–52. DOI: 10.17212/1994-6309-2022-24.3-40-52. Conflicts of Interest The authors declare no conflict of interest. 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1