OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 27 No. 2 2025 7. Mule R., Deshpande A., Verma U., Gumaste S., Kulkarni P., Shah J., Kulkarni A. A review on wear prediction models of polymers. Transactions on Innovations in Science & Technology, 2021, vol. 5 (2), pp. 278–282. 8. Satkar A.R., Mache A., Kulkarni A. Numerical investigation on perforation resistance of glass-carbon/epoxy hybrid composite laminate under ballistic impact. Materials Today: Proceedings, 2022, vol. 59 (1), pp. 734–741. DOI: 10.1016/j.matpr.2021.12.464. 9. Virpe K., Deshpande A., Kulkarni A. A review on tribological behavior of polymer composite impregnated with carbon fillers. AIP Conference Proceedings, 2020, vol. 2311, p. 070030. DOI: 10.1063/5.0035408. 10. Tevruz T. Tribological behaviours of bronze-filled polytetrafluoroethylene dry journal bearings. Wear, 1999, vol. 230 (1), pp. 61–69. DOI: 10.1016/S0043-1648(99)00091-5. 11. Mudasar Pasha B.A., Abdul Budan D., Basavarajappa S., Manjunath Yadav S., Nizamuddi B.A. Dry sliding wear behaviour of PTFE filled with glass and bronze particles. Tribology – Materials, Surfaces & Interfaces, 2011 vol. 5 (2), pp. 59–64. DOI: 10.1179/1751584X11Y.0000000006. 12. Venkateswarlu G., Sharada R., Bhagvanth Rao M. Effect of fillers on mechanical properties of PTFE based composites. Archives of Applied Science Research, 2015, vol. 7 (7), pp. 48–58. 13. Song F., Wang Q., Wang T. Effects of glass fiber and molybdenum disulfide on tribological behaviors and PV limit of chopped carbon fiber reinforced Polytetrafluoroethylene composites. Tribology International, 2016, vol. 104, pp. 392–401. DOI: 10.1016/j.triboint.2016.01.015. 14. Kolhe S., Deshpande A., Wangikar K. Wear behavior of Polytetrafluoroethylene composites: a review. Smart technologies for energy, environment and sustainable development. Singapore, Springer, 2019, pp. 571–584. DOI: 10.1007/978-981-13-6148-7_55. 15. Kanitkar Y.M., Kulkarni A.P., Wangikar K.S. Characterization of glass hybrid composite: a review. Materials Today: Proceedings, 2017, vol. 4 (9), pp. 9627–9630. DOI: 10.1016/j.matpr.2017.06.237. 16. Deshpande A.R., Kulkarni A.P., Wasatkar N., Gajalkar V., Abdullah M. Prediction of wear rate of glass-filled PTFE composites based on machine learning approaches. Polymers, 2024, vol. 16 (18), pp. 2666. DOI: 10.3390/ polym16182666. 17. Wang J., Chen B., Liu N., Han G., Yan F. Combined effects of fiber/matrix interface and water absorption on the tribological behaviors of water lubricated-polytetrafluoroethylene-based composites reinforced with carbon and basalt fibers. Composites Part A: Applied Science and Manufacturing, 2014, vol. 59, pp. 85–92. DOI: 10.1016/j. compositesa.2014.01.004. 18. Mu L., Feng X., Zhu J., Wang H., Sun Q., Shi Y., Lu X. Comparative study of tribological properties of different fibers reinforced PTFE/PEEK composites at elevated temperatures. Tribology Transactions, 2010, vol. 53 (2), pp. 189–194. DOI: 10.1080/10402000903097460. 19. Li F., Hu K., Li J., Zhao B. The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethylene. Wear, 2001, vol. 249 (10–11), pp. 877–882. DOI: 10.1016/S0043-1648(01)00816-X. 20. Şahin Y. Analysis of abrasive wear behavior of PTFE composite using Taguchi’s technique. Cogent Engineering, 2015, vol. 2 (1), pp. 1–15. DOI: 10.1080/23311916.2014.1000510. 21. Tabrizi A.T., Aghajani H., Saghafian H., Laleh F.F. Correction of Archard equation for wear behavior of modified pure titanium. Tribology International, 2021, vol. 155, p. 106772. DOI: 10.1016/j.triboint.2020.106772. 22. Hegadekatte V., Huber N., Kraft O. Finite element based simulation of dry sliding wear. Modelling and Simulation in Materials Science and Engineering, 2005, vol. 13, pp. 57–75. DOI: 10.1088/0965-0393/13/1/005. 23. Nile R., Verma U., Deshpande A., Joshi S., Shah J., Kulkarni A. Mathematical modeling of various forces acting on piston rod packing rings. Materials Today: Proceedings, 2022, vol. 49 (5), pp. 1521–1526. DOI: 10.1016/j. matpr.2021.07.304. 24. Kulkarni A.P., Chinchanikar S., Sargade V.G. Dimensional analysis and ANN simulation of chip-tool interface temperature during turning SS304. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2021, vol. 23 (4), pp. 47–64. DOI: 10.17212/1994-6309-2021-23.4-47-64. Conflicts of Interest The authors declare no conflict of interest. 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1