OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 27 No. 2 2025 9. Kim H. Study of the fracture of the last stage blade in an aircraft gas turbine. Engineering Failure Analysis, 2009, vol. 16 (7), pp. 2318–2324. DOI: 10.1016/j.engfailanal.2009.03.017. 10. Silveira E., Atxaga G., Irisarri A.M. Failure analysis of two sets of aircraft blades. Engineering Failure Analysis, 2010, vol. 17 (3), pp. 641–647. DOI: 10.1016/j.engfailanal.2008.10.015. 11. Karthik D., Swaroop S. Laser shock peening enhanced corrosion properties in a nickel-based Inconel 600 superalloy. Journal of Alloys and Compounds, 2017, vol. 694, pp. 1309–1319. DOI: 10.1016/j.jallcom.2016.10.093. 12. Chen L., SunY., Li L., RenX. Microstructural evolution andmechanical properties of selective laser melted nickelbased superalloy after post treatment. Materials Science and Engineering A, 2020, vol. 792, p. 139649. DOI: 10.1016/j. msea.2020.139649. 13. Chen M., Shen M., Zhu S., Wang F., Wang X. Effect of sand blasting and glass matrix composite coating on oxidation resistance of a nickel-based superalloy at 1000°C. CorrosionScience, 2013, vol. 73, pp. 331–341. DOI: 10.1016/j. corsci.2013.04.022. 14. Ghara T., Paul S., Bandyopadhyay P.P. Effect of grit blasting parameters on surface and near-surface properties of different metal alloys. Journal of Thermal Spray Technology, 2021, vol. 30, pp. 251–269. DOI: 10.1007/s11666-02001127-1. 15. Ji R., Yang Z., Jin H., Liu Y., Wang H., Zheng Q., Cheng W., Cai B., Li X. Surface nanocrystallization and enhanced surface mechanical properties of nickel-based superalloy by coupled electric pulse and ultrasonic treatment. Surface and Coatings Technology, 2019, vol. 375, pp. 292–302. DOI: 10.1016/j.surfcoat.2019.07.037. 16. Zhang X., Li H., Shao G., Gao J., Zhan M. “Target effect” of pulsed current on the texture evolution behaviour of Ni-based superalloy during electrically-assisted tension. Journal of Alloys and Compounds, 2022, vol. 898, p. 162762. DOI: 10.1016/j.jallcom.2021.162762. 17. Wang C., Shen X.J.,An Z.B., Zhou L.C., Chai Y. Effects of laser shock processing on microstructure and mechanical properties of K403 nickel-alloy. Materials Design, 2016, vol. 89, pp. 582–588. DOI: 10.1016/j.matdes.2015.10.022. 18. Baek S.H., He S., JangM.S., Back D.H., Jeong D.W., Park S.H. Ultrasonic nanocrystal surface modification effect on reduction of hydrogen embrittlement in Inconel-625 parts fabricated via additive manufacturing process. Journal of Manufacturing Processes, 2023, vol. 108, pp. 685–695. DOI: 10.1016/j.jmapro.2023.11.024. 19. Vorontsov A.V., Utyaganova V.R., Zykova A.P. Vliyanie udarnoi obrabotki v raznykh chastotnykh diapazonakh na evolyutsiyu strukturno-fazovogo sostoyaniya poverkhnosti perlitnoi stali [Influence of shock treatment in different frequency ranges on the evolution of structure-phase state of perlite steel surface]. Izvestiya vysshikh uchebnykh zavedenii. Fizika = Russian Physics Journal, 2024, vol. 67, iss. 6, pp. 32–38. DOI: 10.17223/00213411/67/6/5. (In Russian). 20. Liu Y., Wang L., Liu H., Zhang B., Zhao G. Effect of electropulsing treatment on corrosion behavior of nickel base corrosion-resistant alloy. Transactions of Nonferrous Metals Society of China, 2011, vol. 21 (9), pp. 1970–1975. DOI: 10.1016/s1003-6326(11)60958-8. Conflicts of Interest The authors declare no conflict of interest. 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1