OBRABOTKAMETALLOV Vol. 27 No. 3 2025 35 TECHNOLOGY 3. Sutter G., Faure L., MolinariA., Ranc N., PinaV.An experimental technique for the measurement of temperature fi elds for the orthogonal cutting in high speed machining. International Journal of Machine Tools and Manufacture, 2003, vol. 43 (7), pp. 671–678. DOI: 10.1016/S0890-6955(03)00037-3. 4. Shan C., Zhang X., Shen B., Zhang D. An improved analytical model of cutting temperature in orthogonal cutting of Ti6Al4V. Chinese Journal of Aeronautics, 2019, vol. 32 (3), pp. 759–769. DOI: 10.1016/j.cja.2018.12.001. 5. Barzegar Z., Ozlu E. Analytical prediction of cutting tool temperature distribution in orthogonal cutting including third deformation zone. Journal of Manufacturing Processes, 2021, vol. 67, pp. 325–344. DOI: 10.1016/j. jmapro.2021.05.003. 6. Weng J., Saelzer J., Berger S., Zhuang K., Bagherzadeh A., Budak E., Biermann D. Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties. Journal of Materials Processing Technology, 2023, vol. 314, p. 117905. DOI: 10.1016/j.jmatprotec.2023.117905. 7. Kulkarni A.P., Chinchanikar S., Sargade V.G. Dimensional analysis and ANN simulation of chip-tool interface temperature during turning SS304. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2021, vol. 23, no. 4, pp. 47–64. DOI: 10.17212/1994-6309-2021-23.4-47-64. 8. Ren X.J., Yang Q.X., James R.D., Wang L. Cutting temperatures in hard turning chromium hardfacings with PCBN tooling. Journal of Materials Processing Technology, 2004, vol. 147 (1), pp. 38–44. DOI: 10.1016/j.jmatprotec.2003.10.013. 9. Sulaiman S., Roshan A., Borazjani S. Eff ect of cutting parameters on tool-chip interface temperature in an orthogonal turning process. Advanced Materials Research, 2014, vol. 903, pp. 21–26. DOI: 10.4028/www.scientifi c. net/amr.903.21. 10. Kikuchi M. The use of cutting temperature to evaluate the machinability of titanium alloys. Acta Biomaterialia, 2009, vol. 5 (2), pp. 770–775. DOI: 10.1016/j.actbio.2008.08.016. 11. Karaguzel U., Budak E. Investigating eff ects of milling conditions on cutting temperatures through analytical and experimental methods. Journal of Materials Processing Technology, 2018, vol. 262, pp. 532–540. DOI: 10.1016/j. jmatprotec.2018.07.024. 12. Baohai W., Di C., Xiaodong H., Dinghua Z., Kai T. Cutting tool temperature prediction method using analytical model for end milling. Chinese Journal of Aeronautics, 2016, vol. 29 (6), pp. 1788–1794. DOI: 10.1016/j. cja.2016.03.011. 13. Li S., Li Sh., Hu Y., Popov E. Experimental study on coupling characteristics of cutting temperature rise and cutting vibration under diff erent tool wear states. International Journal of Advanced Manufacturing Technology, 2022, vol. 118, pp. 907–919. DOI: 10.1007/s00170-021-07948-w. 14. Yu Q., Li Sh., Zhang X., Shao M. Experimental study on correlation between turning temperature rise and turning vibration in dry turning on aluminum alloy. International Journal of Advanced Manufacturing Technology, 2019, vol. 103, pp. 453–469. DOI: 10.1007/s00170-019-03506-7. 15. Chichinadze A.V., Shuchev K.G., Ryzhkin A.A., Filipchuk A.I., Klimov M.M. Temperaturnyi rezhim pri trenii instrumental’nykh materialov s uchetom ob”emnosti istochnika teplovydeleniya [Temperature regime during friction of tool materials taking into account the volume of heat source]. Trenie i iznos = Friction and Wear, 1986, no. 7, pp. 43–51. 16. Lebedev V.A., Aliev M.M., Fominov E.V., Fomenko A.V., Marchenko A.A., Mironenko A.Е. Termoelektricheskie kharakteristiki protsessa tocheniya stal’nykh zagotovok tverdosplavnymi plastinami s kombinirovannymi pokrytiyami [Thermoelectric characteristics of the process of turning steel billets by carbide inserts with combined coatings]. Trenie i iznos = Friction and Wear, 2023, vol. 44, no. 2, pp. 114–121. DOI: 10.32864/0202-4977-202344-2-114-121. 17. RyzhkinA.A. Sinergetika iznashivaniya instrumental’nykh materialov pri lezviinoi obrabotke [Synergetics of tool materials wear during blade machining]. Rostov-on-Don, DSTU Publ., 2019. 289 p. 18. Migranov M.Sh., Shuster L.Sh. Iznosostoikost’ rezhushchego instrumenta s mnogosloinymi pokrytiyami [Wear resistance of cutting tools with multilayer coatings]. Trenie i iznos = Friction and Wear, 2005, vol. 26, no. 3, pp. 304–307. 19. Fominov E.V., Gvindjilia V.E., Marchenko A.A., Shuchev K.G. Eff ect of periodic fl uctuations of cutting mode parameters on the temperature of the front face of a turning tool. Advanced Engineering Research (Rostov-onDon), 2025, vol. 25 (1), pp. 32–42. DOI: 10.23947/2687-1653-2025-25-1-32-42. 20. DanielyanA.M., BobrikP.I.,GurevichYa.L. Obrabotka rezaniemzharoprochnykh stalei, splavov i tugoplavkikh metallov [Cutting treatment of heat-resistant steels, alloys and refractory metals]. Moscow, Mashinostroenie Publ., 1965. 308 p.
RkJQdWJsaXNoZXIy MTk0ODM1