OBRABOTKAMETALLOV technology Vol. 27 No. 3 2025 6. Weng J., Saelzer J., Berger S., Zhuang K., Bagherzadeh A., Budak E., Biermann D. Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties. Journal of Materials Processing Technology, 2023, vol. 314, p. 117905. DOI: 10.1016/j.jmatprotec.2023.117905. 7. Kulkarni A.P., Chinchanikar S., Sargade V.G. Dimensional analysis and ANN simulation of chip-tool interface temperature during turning SS304. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2021, vol. 23, no. 4, pp. 47–64. DOI: 10.17212/1994-6309-2021-23.4-47-64. 8. Ren X.J., Yang Q.X., James R.D., Wang L. Cutting temperatures in hard turning chromium hardfacings with PCBN tooling. Journal of Materials Processing Technology, 2004, vol. 147 (1), pp. 38–44. DOI: 10.1016/j.jmatprotec.2003.10.013. 9. Sulaiman S., Roshan A., Borazjani S. Effect of cutting parameters on tool-chip interface temperature in an orthogonal turning process. Advanced Materials Research, 2014, vol. 903, pp. 21–26. DOI: 10.4028/www.scientific. net/amr.903.21. 10. Kikuchi M. The use of cutting temperature to evaluate the machinability of titanium alloys. Acta Biomaterialia, 2009, vol. 5 (2), pp. 770–775. DOI: 10.1016/j.actbio.2008.08.016. 11. Karaguzel U., Budak E. Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods. Journal of Materials Processing Technology, 2018, vol. 262, pp. 532–540. DOI: 10.1016/j. jmatprotec.2018.07.024. 12. Baohai W., Di C., Xiaodong H., Dinghua Z., Kai T. Cutting tool temperature prediction method using analytical model for end milling. Chinese Journal of Aeronautics, 2016, vol. 29 (6), pp. 1788–1794. DOI: 10.1016/j. cja.2016.03.011. 13. Li S., Li Sh., Hu Y., Popov E. Experimental study on coupling characteristics of cutting temperature rise and cutting vibration under different tool wear states. International Journal of Advanced Manufacturing Technology, 2022, vol. 118, pp. 907–919. DOI: 10.1007/s00170-021-07948-w. 14. Yu Q., Li Sh., Zhang X., Shao M. Experimental study on correlation between turning temperature rise and turning vibration in dry turning on aluminum alloy. International Journal of Advanced Manufacturing Technology, 2019, vol. 103, pp. 453–469. DOI: 10.1007/s00170-019-03506-7. 15. Chichinadze A.V., Shuchev K.G., Ryzhkin A.A., Filipchuk A.I., Klimov M.M. Temperaturnyi rezhim pri trenii instrumental’nykh materialov s uchetom ob”emnosti istochnika teplovydeleniya [Temperature regime during friction of tool materials taking into account the volume of heat source]. Trenie i iznos = Friction and Wear, 1986, no. 7, pp. 43–51. 16. Lebedev V.A., Aliev M.M., Fominov E.V., Fomenko A.V., Marchenko A.A., Mironenko A.Е. Termoelektricheskie kharakteristiki protsessa tocheniya stal’nykh zagotovok tverdosplavnymi plastinami s kombinirovannymi pokrytiyami [Thermoelectric characteristics of the process of turning steel billets by carbide inserts with combined coatings]. Trenie i iznos = Friction and Wear, 2023, vol. 44, no. 2, pp. 114–121. DOI: 10.32864/0202-4977-202344-2-114-121. 17. RyzhkinA.A. Sinergetika iznashivaniya instrumental’nykh materialov pri lezviinoi obrabotke [Synergetics of tool materials wear during blade machining]. Rostov-on-Don, DSTU Publ., 2019. 289 p. 18. Migranov M.Sh., Shuster L.Sh. Iznosostoikost’ rezhushchego instrumenta s mnogosloinymi pokrytiyami [Wear resistance of cutting tools with multilayer coatings]. Trenie i iznos = Friction and Wear, 2005, vol. 26, no. 3, pp. 304–307. 19. Fominov E.V., Gvindjilia V.E., Marchenko A.A., Shuchev K.G. Effect of periodic fluctuations of cutting mode parameters on the temperature of the front face of a turning tool. Advanced Engineering Research (Rostov-onDon), 2025, vol. 25 (1), pp. 32–42. DOI: 10.23947/2687-1653-2025-25-1-32-42. 20. DanielyanA.M., BobrikP.I.,GurevichYa.L. Obrabotka rezaniemzharoprochnykh stalei, splavov i tugoplavkikh metallov [Cutting treatment of heat-resistant steels, alloys and refractory metals]. Moscow, Mashinostroenie Publ., 1965. 308 p. 21. Reznikov A.N. Teplofizika rezaniya [Thermophysics of cutting]. Moscow, Mashinostroenie Publ., 1969. 288 p. 22. Abbas A.T., Al-Abduljabbar A.A., El Rayes M.M., Benyahia F., Abdelgaliel I.H., Elkaseer A. Multi-objective optimization of performance indicators in turning of AISI 1045 under dry cutting conditions. Metals, 2023, vol. 13 (1), p. 96. DOI: 10.3390/met13010096. 23. Özbek O. Evaluation of nano fluids with minimum quantity lubrication in turning of Ni-base superalloy UDIMET 720. Lubricants, 2023, vol. 11 (4), p. 159. DOI: 10.3390/lubricants11040159.
RkJQdWJsaXNoZXIy MTk0ODM1