OBRABOTKAMETALLOV Vol. 27 No. 3 2025 technology 24. Arun K.K., Navaneeth V.R., Prabhu S., Ramesh Kumar M., Giriraj M. Experimental investigation of turning process parameter under several cutting conditions for duplex steels for minimization of cutting temperature. Materials Today: Proceedings, 2022, vol. 62 (4), pp. 1917–1920. DOI: 10.1016/j.matpr.2022.01.447. 25. Zakovorotny V.L., Gvindjiliya V.E. The influence of the vibration on the tool shape-generating trajectories when turning. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2019, vol. 21, no. 3, pp. 42–58. DOI: 10.17212/1994-6309-2019-21.3-42-58. 26. Ryzhkin A.A. Teplofizicheskie protsessy pri iznashivanii instrumental’nykh rezhushchikh materialov [Thermophysical processes at wear of tool cutting materials]. Rostov-on-Don, DSTU Publ., 2005. 311 p. 27. Bobrov V.F. Razvitie nauki o rezanii metallov [Development of science of metal cutting]. Moscow, Mashinostroenie Publ., 1967. 416 p. 28. Silin S.S. Metody podobiya pri rezanii materialov [Similarity methods in cutting of materials]. Moscow, Mashinostroenie Publ., 1979. 152 p. 29. Gvindjiliya V.E., Fominov E.V., Moiseev D.V., Gamaleeva E.I. Influence of dynamic characteristics of the turning process on the workpiece surface roughness. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 2, pp. 143–157. DOI: 10.17212/1994-6309-202426.2-143-157. Conflicts of Interest The authors declare no conflict of interest. 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1