OBRABOTKAMETALLOV Vol. 27 No. 3 2025 107 EQUIPMENT. INSTRUMENTS 50. Meyer J., Olivier J. Transitional fl ow inside enhanced tubes for fully developed and developing fl ow with different types of inlet disturbances: Part I – Adiabatic pressure drops. International Journal of Heat and Mass Transfer, 2011, vol. 54 (7), pp. 1587–1597. DOI: 10.1016/j.ijheatmasstransfer.2010.11.027. 51. Meyer J., Olivier J. Transitional fl ow inside enhanced tubes for fully developed and developing fl ow with diff erent types of inlet disturbances: Part II – Heat transfer. International Journal of Heat and Mass Transfer, 2011, vol. 54 (7), pp. 1598–1607. DOI: 10.1016/j.ijheatmasstransfer.2010.11.026. 52. García A., Solano J.P., Vicente P.G., Viedma A. The infl uence of artifi cial roughness shape on heat transfer enhancement: Corrugated tubes, dimpled tubes and wire coils. Applied Thermal Engineering, 2012, vol. 35, pp. 196– 201. DOI: 10.1016/j.applthermaleng.2011.10.030. 53. Mousa M.H., Miljkovic N., Nawaz K. Review of heat transfer enhancement techniques for single phase fl ows. Renewable and Sustainable Energy Reviews, 2021, vol. 137, p. 110566. DOI: 10.1016/j.rser.2020.110566. 54. Everts M., Meyer J.P. Heat transfer of developing and fully developed fl ow in smooth horizontal tubes in the transitional fl ow regime. International Journal of Heat and Mass Transfer, 2018, vol. 117, pp. 1331–1351. DOI: 10.1016/j.ijheatmasstransfer.2017.10.071. 55. Kobayashi S., Inokuma K., Murata A., Iwamoto K. Eff ects of fl ow pulsation and surface geometry on heat transfer performance in a channel with teardrop-shaped dimples measured by transient technique. ASME Journal of Heat and Mass Transfer, 2024, vol. 146, p. 072001. DOI: 10.1115/1.4065117. 56. Abdelfattah M., Aziz M.A., Maghrabie H.M. Numerical analysis of heat transfer and fl uid fl ow structures of jet impingement on a fl at plate with diff erent shapes of roughness elements. Numerical Heat Transfer, Part A: Applications, 2024, pp. 1–26. DOI: 10.1080/10407782.2024.2379032. 57. Ansys Fluent Theory Guide. ANSYS, Inc., 2021. 58. Nikuradse J. Laws of fl ow in rough pipes. NACA Technical Memorandums, NACA-TM-1292. NACA, 1950. 62 p. 59. Cebeci T., Bradshaw P. Momentum transfer in boundary layers. Washington, Hemisphere Pub. Corp., 1977. 407 p. ISBN 0070103003. ISBN 9780070103009. 60. Nishandar S.V., Pise A.T., Bagade P.M., Gaikwad M.U., Singh A. Computational modelling and analysis of heat transfer enhancement in straight circular pipe with pulsating fl ow. International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, vol. 19 (3), pp. 1951–1969. DOI: 10.1007/s12008-024-01907-x. 61. Dwivedi R., Somatkar A., Chinchanikar S. Modeling and optimization of roller burnishing of Al6061-T6 process for minimum surface roughness, better microhardness and roundness. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 3, pp. 52–65. DOI: 10.17212/19946309-2024-26.3-52-65. Confl icts of Interest The authors declare no confl ict of interest. © 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1