OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 27 No. 3 2025 18. Osintsev K.A., Gromov V.E., Konovalov S.V., Panchenko I.A., Vashchuk E.S. Structural-phase state of highentropy Al-Co-Cr-Fe-Ni alloy obtained by wire-arc additive technology. Polzunovskiy vestnik, 2016, no. 1, pp. 141– 146. DOI: 10.25712/ASTU.2072-8921.2021.01.020. (In Russian). 19. Zemanate A.M., Júnior A.M.J., Andreani G.F. de Lima, Roche V., Cardoso K.R. Corrosion behavior of AlCoCrFeNix high entropy alloys. Electrochimica Acta, 2023, vol. 441, p. 141844. DOI: 10.1016/j. electacta.2023.141844. 20. Niu S., Kou H., Guo T., Zhang Y., Wang J., Li J. Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy. Materials Science and Engineering: A, 2016, vol. 671, pp. 82–86. DOI: 10.1016/j. msea.2016.06.040. 21. Ivanov I.V., Emurlaev K.I., Kuper K.E., Safarova D.E., Bataev I.A. Structural transformations during annealing of cold-worked high-entropy alloy Al0.3CoCrFeNi. Izvestiya vuzov. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy, 2022, vol. 65 (8), pp. 539–547. DOI: 10.17073/0368-0797-2022-8-539-547. (In Russian). 22. Zhou J.L., Cheng Y.H., Wan Y.X., Chen H., Wang Y.F., Yang J.Y. Strengthening by Ti, Nb, and Zr doping on microstructure, mechanical, tribological, and corrosion properties of CoCrFeNi high-entropy alloys. Journal of Alloys and Compounds, 2024, vol. 984, p. 173819. DOI: 10.1016/j.jallcom.2024.173819. 23. Shi H., Fetzer R., Jianu A., Weisenburger A., Heinzel A., Lang F., Müller G. Influence of alloying elements (Cu, Ti, Nb) on the microstructure and corrosion behaviour of AlCrFeNi-based high entropy alloys exposed to oxygen-containing molten Pb. Corrosion Science, 2021, vol. 190, p. 109659. DOI: 10.1016/j.corsci.2021.109659. 24. Pan B., Xu X., Yang J., Zhan H., Feng L., Long Q., Zhou H. Effect of Nb, Ti, and V on wear resistance and electrochemical corrosion resistance of AlCoCrNiMx (M=Nb, Ti, V) high-entropy alloys. Materials Today Communications, 2024, vol. 39, p. 109314. DOI: 10.1016/j.mtcomm.2024.109314. 25. Astafurova E.G., Melnikov E.V., Reunova K.A., Moskvina V.A., Astafurov S.V., Panchenko M.Yu., Mikhno A.S., Tumbusova I. Temperature dependence of mechanical properties and plastic flow behavior of cast multicomponent alloys Fe20Cr20Mn20Ni20Co20–хCх (х = 0, 1, 3, 5). Fizicheskaya mezomekhanika = Physical Mesomechanics, 2021, vol. 24, no. 4, pp. 52–63. DOI: 10.24412/1683-805X-2021-4-52-63. (In Russian). 26. Astafurova E.G., Reunova K.A., Melnikov E.V., Panchenko M.Yu., Astafurov S.V., Maier G.G., Moskvina V.A. On the difference in carbon-and nitrogen-alloying of equiatomic FeMnCrNiCo high-entropy alloy. Materials Letters, 2020, vol. 276, p. 128183. DOI: 10.1016/j.matlet.2020.128183. 27. Shubert A.V., Konovalov S.V., Panchenko I.A. A review of research on high-entropy alloys, its properties, methods of creation and application. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 4, pp. 153–179. DOI: 10.17212/1994-6309-2024-26.4-153-179. 28. Dalan F.C., Sobrinho A.S.D.S., Nishihora R.K., Santos S.F., Martins G.V., Cardoso K.R. Effect of Nb and Ti additions on microstructure, hardness and wear properties of AlCoCrFeNi high-entropy alloy. Journal of Alloys and Compounds, 2025, vol. 1010, p. 177117. DOI: 10.1016/j.jallcom.2024.177117. 29. Ma S.G., Zhang Y. Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy. Materials Science and Engineering: A, 2012, vol. 532, pp. 480–486. DOI: 10.1016/j.msea.2011.10.110. 30. Gromov V.E., Konovalov S.V., Efimov M.O., Panchenko I.A., Shlyarov V.V. Ways to improve the properties of high-entropy alloys Cantor CoCrFeNiMn and CoCrFeNiAl. Izvestiya vuzov. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy, 2024, vol. 67 (3), pp. 283–292. DOI: 10.17073/0368-0797-2024-3-283-292. (In Russian). 31. Zhang M., Zhang L., Liaw P.K., Li G., Liu R. Effect of Nb content on thermal stability, mechanical and corrosion behaviors of hypoeutectic CoCrFeNiNbx high-entropy alloys. Journal of Materials Research, 2018, vol. 33 (19), pp. 3276–3286. DOI: 10.1557/jmr.2018.103. 32. MunitzA., Salhov S., Hayun S., Frage N. Heat treatment impacts the micro-structure andmechanical properties of AlCoCrFeNi high entropy alloy. Journal of Alloys and Compounds, 2016, vol. 683, pp. 221–230. DOI: 10.1016/j. jallcom.2016.05.034. 33. Güler S., Alkan E.D., Alkan M. Vacuum arc melted and heat treated AlCoCrFeNiTiX based high-entropy alloys: Thermodynamic and microstructural investigations. Journal of Alloys and Compounds, 2022, vol. 903, p. 163901. DOI: 10.1016/j.jallcom.2022.163901. 34. Huang S., Wu H., Xu Y., Zhu H. Effects of heat treatment on the precipitation behaviors and mechanical properties of Nb-doped CrMnFeCoNi0.8 high-entropy alloy. Materials Science and Engineering: A, 2023, vol. 885, p. 145611. DOI: 10.1016/j.msea.2023.145611. 35. Fang Y., Ma P., Wei S., Zhang Z., Yang D., Yang H., Konda G.P., Wan S., Jia Y. Selective laser melting of AlCoCrFeMnNi high entropy alloy: Effect of heat treatment. Journal of Materials Research and Technology, 2023, vol. 26, pp. 7845–7856. DOI: 10.1016/j.jmrt.2023.09.121.
RkJQdWJsaXNoZXIy MTk0ODM1