OBRABOTKAMETALLOV Vol. 27 No. 3 2025 181 MATERIAL SCIENCE 3. Qu S., An X.H., Yang H.J., Huang C.X., Yang G., Zang Q.S., Wang Z.G., Wu S.D., Zhang Z.F. Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing. Acta Materialia, 2009, vol. 57 (5), pp. 1586–1601. DOI: 10.1016/j.actamat.2008.12.002. 4. Massalski T.B. The Al-Cu (Aluminum-Copper) system. Bulletin of Alloy Phase Diagrams, 1980, vol. 1, pp. 27–33. DOI: 10.1007/BF02883281. 5. Kroupa A., Zobač O., Richter K.W. The thermodynamic reassessment of the binary Al-Cu system. Journal of Materials Science, 2021, vol. 56, pp. 3430–3443. DOI: 10.1007/s10853-020-05423-7. 6. Zobac O., KroupaA., ZemanovaA., Richter K.W. Experimental description of theAl-Cu binary phase diagram. Metallurgical and Materials Transactions A, 2019, vol. 50, pp. 3805–3815. DOI: 10.1007/s11661-019-05286-x. 7. Alés A. Study of diff erent structures derives of β−Cu3Al by means of ab-initio calculations and quasi-harmonic approximation. Computational Condensed Matter, 2022, vol. 31, p. e00652. DOI: 10.1016/j.cocom.2022.e00652. 8. Hallstedt B., Gröbner J., Hampl M., Schmid-Fetzer R. Calorimetric measurements and assessment of the binary Cu-Si and ternaryAl-Cu-Si phase diagrams. Calphad, 2016, vol. 53, pp. 25–38. DOI: 10.1016/j.calphad.2016.03.002. 9. Sufryd K., Ponweiser N., Riani P., Richter K.W., Cacciamani G. Exper-imental investigation of the Cu-Si phase diagram at x(Cu)>0.72. Intermetallics, 2011, vol. 19 (10), pp. 1479–1488. DOI: 10.1016/j.intermet.2011.05.017. 10. Phillips H.W.L. The constitution of aluminum-copper-silicon alloys. Journal of the Institute of Metals, 1953, vol. 82, pp. 9–15. 11. Raghavan V. Al-Cu-Si (Aluminum-Copper-Silicon). Journal of Phase Equilibria and Diff usion, 2007, vol. 28, pp. 180–182. DOI: 10.1007/s11669-007-9024-y. 12. He C.-Y., Du Y., Chen H.-L., Xu H. Experimental investigation and thermodynamic modeling of the Al-Cu-Si system. Calphad, 2009, vol. 33, pp. 200–210. DOI: 10.1016/j.calphad.2008.07.015. 13. Riani P., Sufryd K., Cacciamani G. About the Al-Cu-Si isothermal sec-tion at 500 °C and the stability of the ɛ-Cu15Si4 phase. Intermetallics, 2009, vol. 17, pp. 154–164. DOI: 10.1016/j.intermet.2008.10.011. 14. Miettinen J. Thermodynamic description of the Cu-Al-Si system in the copper-rich corner. Calphad, 2007, vol. 31, pp. 449–456. DOI: 10.1016/j.calphad.2007.05.001. 15. Ponweiser N., Richter K.W. New investigation of phase equilibria in the system Al-Cu-Si. Journal of Alloys and Compounds, 2012, vol. 512, pp. 252-263. DOI: 10.1016/j.jallcom.2011.09.076 16. Filippov A., Shamarin N., Moskvichev E., Savchenko N., Kolubaev E., Khoroshko E., Tarasov S. Heat input eff ect on microstructure and mechanical properties of Electron BeamAdditive Manufactured (EBAM) Cu-7.5wt.%Al Bronze. Materials, 2021, vol. 14 (22), p. 6948. DOI: 10.3390/ma14226948. 17. Filippov A., Shamarin N., Moskvichev E., Savchenko N., Kolubaev E., Khoroshko E., Tarasov S. The eff ect of heat input, annealing, and deformation treatment on structure and mechanical properties of Electron BeamAdditive Manufactured (EBAM) silicon bronze. Materials, 2022, vol. 15, p. 3209. DOI: 10.3390/ma15093209. 18. Zykova A., Panfi lov A., Chumaevskii A., Vorontsov A., Gurianov D., Savchenko N., Kolubaev E., Tarasov S. Decomposition of β′-martensite in an-nealing the additively manufactured aluminum bronze. Materials Letters, 2023, vol. 338, p. 134064. DOI: 10.1016/j.matlet.2023.134064. 19. Shangina D.V., Gubicza J., Dodony E., Bochvar N.R., Straumal P.B., Tabachkova N.Yu., Dobatkin S.V. Improvement of strength and conductivity in Cu-alloys with the application of high pressure torsion and subsequent heat-treatments. Journal of Materials Science, 2014, vol. 49, pp. 6674–6681. DOI: 10.1007/s10853-014-8339-4. 20. Valiev R.Z., Islamgaliev R.K.,Alexandrov I.V. Bulk nanostructured materials from severe plastic deformation. Progress in Materials Science, 2000, vol. 45, pp. 103–189. DOI: 10.1016/S0079-6425(99)00007-9. 21. Filippov A.V., Khoroshko E.S., Shamarin N.N., Kolubaev E.A., Tarasov S.Yu. Study of the properties of silicon bronze-based alloys printed using electron beam additive manufacturing technology. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2023, vol. 25, no. 1, pp. 110–130. DOI: 10.17212/1994-6309-2023-25.1-110-130. (In Russian). 22. Besson R., Avettand-Fenoel M.-N., Thuinet L., Kwon J., Addad A., Roussel P., Legris A. Mechanisms of formation of Al4Cu9 during mechanical alloying: An experimental study. Acta Materialia, 2015, vol. 87, pp. 216– 224. DOI: 10.1016/j.actamat.2014.12.050. 23. Faizova S.N., Aksenov D.A., Faizov I.A., Nazarov K.S. Unusual kinetics of strain-induced diff usional phase transformations in Cu-Cr-Zr alloy. Letters on Materials, 2021, vol. 11 (2), pp. 218–222. DOI: 10.22226/2410-35352021-2-218-222. 24. Tolmachev T.P., Pilyugin V.P., Patselov A.M., Gapontseva T.M., Plotnikov A.V., Churbaev R.V., Inozemtsev A.V. Features of the strain-induced dissolution and structure of fracture surfaces in Cu-Co alloys. Diagnostics, Resource and Mechanics of Materials and Structures, 2019, iss. 6, pp. 48–57. DOI: 10.17804/24109908.2019.6.048-057. (In Russian).
RkJQdWJsaXNoZXIy MTk0ODM1