OBRABOTKAMETALLOV Vol. 27 No. 3 2025 220 MATERIAL SCIENCE 18. Everton S.K., Hirsch M., Stravroulakis P., Leach R.K., Clare A.T. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design, 2016, vol. 95, pp. 431–445. DOI: 10.1016/j.matdes.2016.01.099. 19. Mei X., Wang X., Peng Y., Gu H., Zhong G., Yang S. Interfacial characterization and mechanical properties of 316L stainless steel/Inconel 718 manufactured by selective laser melting. Material Science and Engineering: A, 2019, vol. 758, pp. 185–191. DOI: 10.1016/j.msea.2019.05.011. 20. Villaret F., Boulnat X., Aubry P., Yano Y., Ohtsuka S., Fabrègue D., De Carlan Y. Laser Beam Direct Energy Deposition of graded austenitic-to-martensitic steel junctions compared to dissimilar Electron Beam welding. Materials Science and Engineering: A, 2021, vol. 824, p. 141794. DOI: 10.1016/j.msea.2021.141794. 21. Astafurov S., Astafurova E. Phase composition of austenitic stainless steels in additive manufacturing: A review. Metals, 2021, vol. 11 (7), p. 1052. DOI: 10.3390/met11071052. 22. Pouranvari M., Khorramifar M., Marashi S.P.H. Ferritic–austenitic stainless steels dissimilar resistance spot welds: metallurgical and failure characteristics. Science and Technology of Welding and Joining, 2016, vol. 21 (6), pp. 438–445. DOI: 10.1080/13621718.2015.1124491. Confl icts of Interest The authors declare no confl ict of interest. © 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1