OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 27 No. 3 2025 9. Abreu-Castillo H.O., d’Oliveira A.S.C.M. Challenges of nanoparticle-reinforced NiAl-based coatings processed by in situ synthesis of the aluminide. The International Journal of Advanced Manufacturing Technology, 2024, vol. 134 (3–4), pp. 1547–1561. DOI: 10.1007/s00170-024-14162-x. 10. Burkov A.A. Use of Ni and Al granules and WC powder for electric spark deposition of metalloceramic coatings. Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional’nye pokrytiya = Powder Metallurgy and Functional Coatings, 2025, vol. 19, no. 2, pp. 62–72. DOI: 10.17073/1997-308X-2025-2-62-72. 11. Barile C., Casavola C., Pappalettera G., Renna G. Advancements in electrospark deposition (ESD) technique: A short review. Coatings, 2022, vol. 12 (10), p. 1536. DOI: 10.3390/coatings12101536. 12. Nikolenko S.V., Verkhoturov A.D. Novye elektrodnye materialy dlya elektroiskrovogo legirovaniya [New electrode materials for electrospark alloing]. Vladivostok, Dal’nauka Publ., 2005. 219 p. ISBN 5-80444-0404-0. 13. Burkov A.A., Kulik M.A. Wear-resistant and anticorrosive coatings based on chrome carbide Cr7C3 obtained by electric spark deposition. Protection of Metals and Physical Chemistry of Surfaces, 2020, vol. 56, pp. 1217–1221. DOI: 10.1134/s2070205120060064. 14. Dvornik M., Mikhailenko E. The influence of the rotation frequency of a planetary ball mill on the limiting value of the specific surface area of the WC and Co nanopowders. Advanced Powder Technology, 2020, vol. 31 (9), pp. 3937–3946. DOI: 10.1016/j.apt.2020.07.033. 15. Dvornik M.I., Zaytsev A.V. Research of surfaces and interfaces increasing during planetary ball milling of nanostructured tungsten carbide/cobalt powder. International Journal of Refractory Metals and Hard Materials, 2013, vol. 36, pp. 271–277. DOI: 10.1016/j.ijrmhm.2012.10.004. 16. Burkov A.A. Production amorphous coatings by electrospark treatment of steel 1035 in a mixture of iron granules with CrMoWCBSi powder. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2019, vol. 21, no. 4, pp. 19–30. DOI: 10.17212/1994-6309-2019-21.4-19-30. (In Russian). 17. Li Y.C., Zhang W.W., Wang Y., Zhang X.Y., Sun L.L. Effect of spray powder particle size on the bionic hydrophobic structures and corrosion performance of Fe-based amorphous metallic coatings. Surface and Coatings Technology, 2022, vol. 437, p. 128377. DOI: 10.1016/j.surfcoat.2022.128377. 18. Almond E.A., Gee M.G. Results from a UK interlaboratory project on dry sliding wear. Wear, 1987, vol. 120 (1), pp. 101–116. DOI: 10.1016/0043-1648(87)90136-0. 19. Kennedy F.E., Lu Y., Baker I. Contact temperatures and their influence on wear during pin-on-disk tribotesting. Tribology International, 2015, vol. 82, pp. 534–542. DOI: 10.1016/j.triboint.2013.10.022. 20. Nataraja M., Balakumar G., Santhosh N., Naik M.R. Characterization of wear rate of Al-12 wt% Si alloy based MMC reinforced with ZrO2 particulates. Materials Research Express, 2024, vol. 11 (3), p. 036522. DOI: 10.1088/2053-1591/ad3468. 21. Chivavibul P., Watanabe M., Kuroda S. Effect of microstructure of HVOF-sprayed WC-Co coatings on their mechanical properties. Thermal Spray, 2007, p. 1212. DOI: 10.31399/asm.cp.itsc2007p0297. 22. Greenwood O.D., Moulzolf S.C., Blau P.J., Lad R.J. The influence of microstructure on tribological properties of WO3 thin films. Wear, 1999, vol. 232 (1), pp. 84–90. DOI: 10.1016/S0043-1648(99)00255-0. 23. Jayashree P., Turani S., Straffelini G. Effect of velocity and temperature on the dry sliding behavior of a SiC-Graphite composite against WC-CoCr and WC-FeCrAlY HVOF coatings. Wear, 2021, vol. 464, p. 203553. DOI: 10.1016/j.wear.2020.203553. 24. Ameen H.A., Hassan K.S., Mubarak E.M.M. Effect of loads, sliding speeds and times on the wear rate for different materials. American Journal of Scientific and Industrial Research, 2011, vol. 2 (1), pp. 99–106. DOI: 10.5251/ajsir.2011.2.1.99.106. Conflicts of Interest The authors declare no conflict of interest. 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1