OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 27 No. 3 2025 References 1. Ajithkumar J.P., Xavior M.A. Cutting force and surface roughness analysis during turning of Al 7075 based hybrid composites. Procedia Manufacturing, 2019, vol. 30, pp. 180–187. DOI: 10.1016/j.promfg.2019.02.026. 2. Khoshaim A.B., Moustafa E.B., Alazwari M.A., Taha M.A. An investigation of the mechanical, thermal and electrical properties of an AA7075 alloy reinforced with hybrid ceramic nanoparticles using friction stir processing. Superalloys, 2023, vol. 13 (1), p. 124. DOI: 10.3390/met13010124. 3. Ma B., Gómez-Recio I., Mazerolles L., Mazeran P.-E., Sanchez C., Delalande S., Portehault D. Ultrasoundassisted liquid-phase synthesis and mechanical properties of aluminum matrix nanocomposites incorporating boride nanocrystals. Small, 2021, vol. 18 (4), p. 2104091. DOI: 10.1002/SMLL.202104091. 4. Lacour-Gogny-Goubert A., Doquet V., Novelli M., Tanguy A., Hallais S., Bourgon J., Villeroy B., ArruffatMassion R. Microstructure, mechanical properties, and thermal stability of Al-Al2O3 nanocomposites consolidated by ECAP or SPS from milled powders. Metals, 2023, vol. 13 (5), p. 825. DOI: 10.3390/met13050825. 5. Ujah C.O., Kallon D.V.V. Trends in aluminium matrix composite development. Crystals, 2022, vol. 12 (10), p. 1357. DOI: 10.3390/cryst12101357. 6. Lakshmikanthan A., Angadi S., Malik V., Saxena K.K., Prakash C., Dixit S., Mohammed K.A. Mechanical and tribological properties of aluminum-based metal-matrix composites. Materials, 2022, vol. 15 (17), p. 6111. DOI: 10.3390/ma15176111. 7. Aynalem G.F. Processing methods and mechanical properties of aluminium matrix composites. Advances in Materials Science and Engineering, 2020, vol. 2020 (1), p. 3765791. DOI: 10.1155/2020/3765791. 8. Stergioudi F., Prospathopoulos A., Farazas A., Tsirogiannis E.-Ch., Michailidis N. Mechanical properties of AA2024 aluminum/MWCNTs nanocomposites produced using different powder metallurgy methods. Metals, 2022, vol. 12 (8), p. 1315. DOI: 10.3390/met12081315. 9. Shivalingaiah K., Nagarajaiah V., Selvan C., Kariappa S., Chandrashekarappa N., Lakshmikanthan A., Chandrashekarappa M., Linul E.E. Stir casting process analysis and optimization for better properties inAl-MWCNTGR-based hybrid composites. Metals, 2022, vol. 12 (8), p. 1297. DOI: 10.3390/met12081297. 10. Ratna Kumar G.E.V., Senthil Kumar K., Ranga Babu J.A. A review on fabrication and mechanical characterization of particulate reinforced Al-7075 metal matrix composites/hybrid composites. Journal of Advanced Research in Applied Sciences and Engineering Technology, 2023, vol. 34 (2), pp. 62–71. DOI: 10.37934/ araset.34.2.6271. 11. Poovazhagan L., Kalaichelvan K., Rajadurai A., Senthilvelan V. Characterization of hybrid silicon carbide and boron carbide nanoparticles-reinforced aluminum alloy composites. Procedia Engineering, 2013, vol. 64, pp. 681–689. DOI: 10.1016/j.proeng.2013.09.143. 12. Alam Md. T., Ansari A.H., Arif S., Alam Md. N. Mechanical properties and morphology of aluminium metal matrix nanocomposites-stir cast products. Advances in Materials and Processing Technologies, 2017, vol. 3 (4), pp. 600–615. DOI: 10.1080/2374068X.2017.1350543. 13. Patil S.P., Kore S.S., Chinchanikar S.S.,Waware S.Y. Characterization andmachinability studies of aluminiumbased hybrid metal matrix composites – A critical review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2023, vol. 101 (2), pp. 137–163. DOI: 10.37934/arfmts.101.2.137163. 14. Waware S.Y., Kore S.S., Patil S.P. Heat transfer enhancement in tubular heat exchanger with jet impingement: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2023, vol. 101 (2), pp. 8–25. DOI: 10.37934/arfmts.101.2.825. 15. Waware S.Y., Kore S.S., Kurhade A.S., Patil S.P. Innovative heat transfer enhancement in tubular heat exchanger: An experimental investigation with minijet impingement. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2024, vol. 116 (2), pp. 51–58. DOI: 10.37934/arfmts.116.2.5158. 16. Kulkarni P., Chinchanikar S. A review on machining of nickel-based superalloys using nanofluids under minimum quantity lubrication (NFMQL). Journal of the Institution of Engineers (India): Series C, 2023, vol. 104 (1), pp. 183–199. DOI: 10.1007/s40032-022-00905-w. 17. Chinchanikar S., Kore S.S., Hujare P. A review on nanofluids in minimum quantity lubrication machining. Journal of Manufacturing Processes, 2021, vol. 68, pp. 56–70. DOI: 10.1016/j.jmapro.2021.05.028. 18. Kulkarni P., Chinchanikar S. Machining effects and multi-objective optimization in Inconel 718 turning with unitary and hybrid nanofluids under MQL. Frattura ed Integrità Strutturale, 2024, vol. 18 (68), pp. 222–241. DOI: 10.3221/IGF-ESIS.68.15. 19. Kulkarni P., Chinchanikar S. Machinability of Inconel 718 using unitary and hybrid nanofluids under minimum quantity lubrication. Advances in Materials and Processing Technologies, 2024, vol. 11 (1), pp. 421–449. DOI: 10.1 080/2374068X.2024.2307103.
RkJQdWJsaXNoZXIy MTk0ODM1