Obrabotka Metallov. 2016 no. 1(70)

ОБРАБОТКА МЕТАЛЛОВ № 1 (70) 2016 58 МАТЕРИАЛОВЕДЕНИЕ sii i ravnokanal’nogo uglovogo pressovaniya [Structure and properties of an Mg-0.3% Ca magnesium alloy after multiaxial deformation and equal-channel angular pressing]. Metally – Russian metallurgy (Metally) , 2014, no. 6, pp. 70–79. (In Russian) 6. Efimova Yu.Yu., Koptseva N.V., Nikitenko O.A. Issledovanie sostoyaniya karbidnoi fazy posle nanostruk- turirovaniya i posleduyushchego volocheniya nizkouglerodistoi stali [Research of a condition of the carbide phase after the nanostructuring and the subsequent drawing of low carbon steel]. Vestnik Magnitogorskogo gosudarstven- nogo tekhnicheskogo universiteta im. G.I. Nosova – Vestnik of Nosov Magnitogorsk State Technical University , 2009, no. 3, pp. 45–48. (In Russian) 7. Valiev R.Z., Aleksandrov I.V. Ob”emnye nanostrukturnye metallicheskie materialy: poluchenie, struktura i svoistva [Bulk nanostructured metal materials: development, structure and properties]. Moscow, Akademkniga Publ., 2007. 398 p. ISBN 978-5-946282-17-8 8. Gleiter H. Nanostructured materials: basic concepts and microstructure. Acta Materialia , 2000, vol. 48, iss. 1, pp. 1–29. doi: 10.1016/S1359-6454(99)00285-2 9. Segal V.M., Reznikov V.I., Drobyshevskii A.I., Kopylov V.I. Plasticheskaya obrabotka metallov prostym sd- vigom [Plastic metal processing by simple shear]. Izvestiya Akademii Nauk SSSR. Metally – Bulletin of the Academy of Sciences of the USSR. Metals , 1981, no. 1, pp. 115–123. 10. Valiev R.Z., Korznikov A.V., Mulyukov R.R. Structure and properties of ultrafine-grained materials pro- duced by severe plastic deformation. Materials Science and Engineering: A , 1993, vol. 168, iss. 2, pp. 141–148. doi: 10.1016/0921-5093(93)90717-S 11. Dobatkin S.V., Valiev R.Z., Krasil’nikov N.A., Raab G.I., Konenkova V.N. Struktura i svoistva stali St3 posle teplogo ravnokanal’nogo uglovogo pressovaniya [Structure and properties of steel St3 after hot equal-channel angu- lar pressing]. Metallovedenie i termicheskaya obrabotka metallov – Metal Science and Heat Treatment , 2000, no. 9, pp. 31–35. (In Russian) 12. Gorkunov E.S., Zadvorkin S.M., Goruleva L.S., Tueva E.A., Veselov I.N., Yakovleva S.P., Makharo- va S.N., Mordovskoi P.G. The effect of equal channel angular pressing on the mechanical and magnetic proper- ties of 09Γ2C steel. Russian Journal of Nondestructive Testing , 2012, vol. 48, iss. 10, pp. 568–575. doi: 10.1134/ S1061830912100051. Translated from Defektoskopiya , 2012, no. 10, pp. 18–27. 13. Yakovleva S.P., Makharova S.N., Mordovskoi P.G., Borisova M.Z. Vliyanie rezhimov ob”emnogo nanostruk- turirovaniya megaplasticheskoi deformatsiei na svoistva konstruktsionnoi stali [Influence of modes of bulk nano- structuring by megaplastic deformation on the properties of constructional steel]. Perspektivnye materialy – Journal of Advanced Materials , 2011, no. 13, pp. 961–967. (In Russian) 14. Shin D.H., Kim B.C., Kim Y.-S., Park K.-T. Microstructural evolution in a commercial low carbon steel by equal channel angular pressing. Acta Materialia , 2000, vol. 48, iss. 9, pp. 2247–2255. doi: 10.1016/S1359- 6454(00)00028-8 15. Park K.-T., Shin D.H. Annealing behavior of submicrometer grained ferrite in a low carbon steel fabricated by severe plastic deformation. Materials Science and Engineering: A , 2002, vol. 334, iss. 1–2, pp. 79–86. doi: 10.1016/ S0921-5093(01)01796-8 16. Hwang B.C., Lee H.S., Kim Y.G., Lee S., Ahn B.D., Shin D.H., Lee C.G. Dynamic deformation behavior of ultrafine-grained low-carbon steels fabricated by equal-channel angular pressing. Metallurgical and Materials Trans- action: A , 2005, vol. 36, iss. 2, pp. 389–397. doi: 10.1007/s11661-005-0310-1 17. Park K.-T., Han S.Y., Ahn B.D., Shin D.H., Lee Y.K., Um K.K. Ultrafine grained dual phase steel fabricated by equal channel angular pressing and subsequent intercritical annealing. Scripta Materialia , 2004, vol. 51, iss. 9, pp. 909–913. doi: 10.1016/j.scriptamat.2004.06.017 18. Makarov A.V., Savrai R.A., Pozdejeva N.A., Smirnov S.V., Vichuzhanin D.I., Korshunov L.G., Maly- gina I.Yu. Effect of hardening friction treatment with hard-alloy indenter on microstructure, mechanical properties, and deformation and fracture features of constructional steel under static and cyclic tension. Surface and Coatings Technology , 2010, vol. 205, iss. 3, pp. 841–852. doi: 10.1016/j.surfcoat.2010.08.025 19. Makarov A.V., Savrai R.A., Gorkunov E.S., Yurovskikh A.S., Malygina I.Yu., Davydova N.A. Structure, mechanical characteristics, and deformation and fractures of quenched structural steel under static and cyclic load- ing after combined strain-heat nanostructuring treatment. Physical Mesomechanics , 2015, vol. 18, iss. 1, pp. 43–57. doi: 10.1134/S1029959915010063 20. Tsellermaer V.Ya. Substructural and phase transformations during intense plastic deformation of metals. Steel in Translation , 1999, vol. 29, no. 12, pp. 75–81. Translated from Izvestiya vysshikh uchebnykh zavedenii. Chernaya metallurgiya , 1999, no. 12, pp. 44–49.