Actual Problems in Machine Building 2016 No. 3

Актуальные проблемы в машиностроении. 2016. №3 Материаловедение в машиностроении ____________________________________________________________________ 433 ASSESSMENT OF THE DEFORMATION FOR UHMWPE COMPOSITE COMPOUNDS Lagereva D.I. , Master’s Degree student, e-mail: lagerenok@mail.ru Mikhaylov D.A ., Master’s Degree student, e-mail: noodle_man@mail.ru Provotorov V.V. , Master’s Degree student, e-mail: reason166@mail.ru Shevtsova K.E. , Master’s Degree student, e-mail: ksenia_shevtsova@mail.ru Novosibirsk State Technical University, 20 Prospekt K. Marksa, Novosibirsk, 630073, Russian Federation Abstract The main idea of this paper is searching for technical and technological solutions for connecting UHMWPE with metal frame for forming a tribological couple. The problems of creating composite compounds, like metal and UHMWPE and using of "dovetail" like connecting elements are also considered. We have summarized all the results of exploration in composite production (metal and UHMWPE) field. The necessary operating parameters on deformation and shaping of ultrahigh molecular weight polyethylene (UHMWPE). Experimentally obtained samples, which were formed under the influence of temperature and pressure are provides straining of polyethylene and compounds. UHMWPE is used as a structural material in the tribological pairs, because it has low coefficient of friction. There is a need of UHMWPE engagement on different kinds of frames, including metal, when constructing tribological pairs. To solve this problem, firstly, necessary to examine ways of forming products made of polyethylene. Keywords UHMWPE, HDPE, die forging, shaping, charging